Modified lattice Boltzmann solution for non-isothermal rarefied gas flow through microchannel utilizing BSR and second-order implicit schemes

Journal of Thermal Analysis and Calorimetry - Thermal microscale gas flow was simulated into a coplanar microchannel was simulated at a broad range of Knudsen numbers. Attempts were made to improve...     

Novel halogenated cyclopentasilylene-2,4-dienes via DFT

In view of immense importance of silylenes and the fact that their properties undergo significant changes on substitution with halogens, here, we have used B3LYP/6-311++G** level of theory to access the effects of 1–4 halogens (X = F, Cl, Br, and I) on four unprecedented sets of cyclopentasilylene-2,4-dienes; with the following formulas: SiC₄H₃X ( 1 _X ), SiC₄H₂X₂ ( 2 _X ), SiC₄HX₃ ( 3 _X ), and SiC₄X₄ ( 4 _X ). In going down from F to I, the singlet (s)-triplet (t) energy gap (ΔE_s-t, a possible indication of stability), and band gap (ΔE_H-L) decrease while nucleophilicity (N), chemical potential (μ), and proton affinity (PA) increase. The overall order of N, μ, and PA for each X is 2 _X > 1 _X > 3 _X > 4 _X . Precedence of 2 _X over 1 _X is attributed to the symmetric cross conjugation in the former. The highest and lowest N are shown by 2 _I and 4 _F . The trend of divalent angle () for each X is 4 _X > 1 _X > 3 _X > 2 _X . The results show that in going from electron withdrawing groups (EWGs) to electron donating groups (EDGs), the ΔE_s-t and ΔE_H-L decrease while N, μ, and PA increase. Also, rather high N of our scrutinized silylenes may suggest new promising ligands in organometallic chemistry.     

Complex polymer architectures through dimethoxymethyl 1,1‐diphenylethylene derivatives

The reactions of polystyryllithium and potassium on dimethoxymethyl 1,1‐diphenylethylene derivatives were studied in different solvents. In a polar medium, A₃ and A₆ star types were formed according to the stoichiometry, whereas in a nonpolar medium, hyperbranched structures were synthesized. Extensions of an already proposed mechanism in polar and nonpolar media were examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3329–3335, 2003     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

Friedel-Crafts reactions catalyzed by samarium diiodide

Samarium diiodide is an efficient precatalyst for the Friedel-Crafts reaction involving various aromatic substrates and chelating electrophiles. Alkyl 3,3,3-trifluoropyruvates are transformed into α-hydroxyesters in good yields with total regioselectivity. In reactions involving an ethyl glyoxylate or a glyoxylic imine, α-hydroxyesters or α-aminoesters are obtained with variable amounts of products resulting from a double Friedel-Crafts reaction.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

Lignocellulosic biomass for bioethanol: Recent advances,technology trends,and barriers to industrial development

1. Download : Download high-res image (214KB)
2. Download : Download full-size image

     

Synthesis and Biological Evaluation of New Fused Thiazolo[4,5-d] Pyridazine Derivatives

The synthesis of thiazolo[4,5-d]pyridazines and the unknown ring systems, thiazolo[4,5-d]-1,2,4-triazolo- and tetrazolo[4,3-b]pyridazines as well as thiazolo(4,5-d]pyridazino[2,3-c]2H triazines, has been achieved according to different pathways. Biological testing of the new tricyclic heterocycles revealed that some of these compounds possess remarkable antibacterial activity.     

N-halogeno-compounds. Part 9 [1]. Azoxy- and azo-arenes derived from 4-(dichloroamino)tetrafluoropyridine; crystal structure of trans-2,3,5,6-tetrafluoro-4-(2,4,6-trimethylphenyl-onn-azoxy)pyridine

The nitrosoarenes ArNO (Ar = C₆H₅, 2-MeC₆H₄, 2,4,6- Me₃C₆H₂ and C₆F₅) have been condensed with 4-(dichloroamino)- tetrafluoropyridine to provide the azoxy-compounds py_FN$\text{N}\text{+}$($\text{N}\text{-}$)Ar (py_F = 2,3,5,6-tetrafluoro-4-pyridyl); de-oxygenation of the first three with triphenylphosphine or triethyl phosphite gave the corresponding azo-compounds, and the reverse reaction was achieved in the case of py_FNNC₆H₂Me₃-2,4,6 using peroxytrifluoroacetic acid. Thermolysis of 4-azidotetrafluoropyridine in the presence of pentafluoronitrosobenzene provided the perfluorinated azoxy-compound py_FN$\text{N}\text{+}$($\text{O}\text{-}$)C₆F₅. X-Ray methods have been used to determine the molecular geometry of py_FN$\text{N}\text{+}$($\text{O}\text{-}$)C₆H₂Me₃-2,4,6.     

Syntheses and polymerizations of some vinyl monomers containing nitro- or fluorophthalimides

4-Nitro-N-vinylphthalimide ( 4 ) was synthesized by two different procedures. Compound 4 was not polymerizable or copolymerizable by AIBN. Poly(N-vinylphthalimide) ( 17 ) was prepared and partially nitrated at 10–25°C. N,N′-(1,2-Ethanediyl)bis(4-nitrophthalimide) ( 15 ) and N,N′-(1,3-propanediyl)bis(4-nitrophthalimide) ( 16 ) were prepared by the condensation of the corresponding diamine with phthalic anhydride followed by nitration of the condensation products. 4-Nitrophthalic anhydride was prepared by the hydrolysis of 15 . Four styrene-substituted phthalimide monomers were synthesized. These include N-(4-vinylphenyl)phthalimide ( 25a ), N-(4-vinylphenyl)-3-fluorophthalimide ( 25b ), N-(4-vinylphenyl)-3-nitrophthalimide ( 25c ), and N-(4-vinylphenyl)-4-nitrophthalimide ( 25d ). Monomers 25a and 25b were polymerized by freeradical initiator (AIBN), whereas monomers 25c and 25d were not polymerizable or copolymerizable by AIBN due to a strong inhibitive effect exerted by the nitrophthalimide group. Monomers 25c and 25d were cationically polymerized (BF₃·OEt₂). Monomer 25b and styrene were copolymerized and their reactivity ratios were r₁ = 1.7 and r₂ = 0.55, respectively. The prepared polymers are useful as backbone polymers for grafting living anionic polymers.