Experimental Study of the Influence of Changes in Load Direction on the Performance of a Crown Bearing

Laboratory tests have been carried out in order to investigate the influence of small changes in load direction on the performance of a steadily loaded hydrodynamic crown journal bearing. Hydrodynamic pressures, temperature distribution on the bush internal surface, shaft temperature, oil flow rate and bush torque were measured for fixed sets of operating conditions, at three different groove locations () with respect to the line of load ( = 0, –30, and +30 degrees). For each groove location quantitative information is provided concerning to the influence of applied load and shaft rotational speed on the performance characteristics. Changing the location of the groove around the load line did affect flow rate, bush torque and maximum hydrodynamic pressure, but only had a slight effect on bush maximum temperature.     

Self-nucleation and recrystallization of isotactic polypropylene (α phase) investigated by differential scanning calorimetry

The crystallization behavior after partial or complete melting of the α phase of iPP is examined by combined differential scanning calorimetry (DSC) and optical microscopy: calorimetric results are directly correlated with corresponding morphologies of microtome sections of DSC samples. On partial melting at various temperatures (hereafter referred to as T_s) located in a narrow range (4°C) below and near T_m, the number of nuclei increases (as in classical self-nucleation experiments), by several orders of magnitude; on subsequent cooling, the crystallization peak is shifted by up to 25°C. After partial melting in the lower part of the T_s range and recrystallization, the polymers display a prominent morphology “memory effect” whereby a phantom pattern of the initial spherulite morphology is maintained. After partial melting in the upper part of the T_s range the initial morphology is erased and self-nucleation affects only the total number of nuclei. The present experimental procedures make it possible to define, under “standard” conditions, the crystallization range of the polymer and in particular, the maximum crystallization temperature achievable when “ideally” nucleated. © John Wiley & Sons, Inc.     

Efficiency scale for polymer nucleating agents

Nucleation of crystallizable polymers is quantified through an efficiency scale obtained and calculated using differential scanning calorimetry (DSC). This scale, defined in self-nucleation experiments, is a simple, convenient and reliable calorimetric efficiency scale. Typical nucleating agents for isotactic polypropylene are evaluated; they rate at best at 60 to=70% on this efficiency scale.

---

Zusammenfassung Anhand einer unter Einsatz von DSC erhaltenen und berechneten Effizienzskale wurde eine Quantifizierung der Keimbildung bei kristallisierbaren Polymeren vorgenommen. Diese in selbstkeimbildenden Experimenten definierte Skale ist eine einfache, praktische und sinnvolle kalorimetrische Effizienzskale. Für isotaktisches Polypropylen wurden typische Keimbildungsagenzien entwickelt, deren Bestgeschwindigkeit auf dieser Effizienzskale bei 60 bis 70% liegt.

     

New chemical synthesis of functionalized arylzinc compounds from aromatic or thienyl bromides under mild conditions using a simple cobalt catalyst and zinc dust

A new chemical method for the preparation of arylzinc intermediates is described in acetonitrile, on the basis of the activation of aryl bromides by low-valent cobalt species arising from the reduction of cobalt halide by zinc dust. This procedure allows for the synthesis of a variety of functionalized aryl- and thienylzinc species in good to excellent yields. The versatility and the simplicity of that original method represent an alternative to most known procedures.     

Cell penetrating agents based on a polyproline helix scaffold

Cell penetrating agents were designed and synthesized that introduce cationic and hydrophobic moieties along the backbone of a polyproline helix (PPII) in an amphiphilic manner. The CD profile has the features that are expected for a PPII helix, demonstrating that the addition of these groups had little effect on the backbone structure. Dramatic increases in uptake were found with MCF-7 cells when up to six guanidinium groups were positioned on the polyproline helix, whereas only modest increases in cellular uptake were observed with the amine-containing polyproline compounds as compared to their flexible counterparts. Amphiphilicity played a key role in the enhanced cell translocation, as scrambled versions of the designed agents, with hydrophobic and cationic groups on all faces of the helix, were only as effective as their flexible peptide counterparts. Interestingly, the most potent agent, P11LRR, demonstrated almost an order of magnitude more efficient cellular uptake as compared to that of the well-studied Tat peptide, with minimal cytotoxicity.     

Self-nucleation and enhanced nucleation of polymers. Definition of a convenient calorimetric “efficiency scale” and evaluation of nucleating additives in isotactic polypropylene (α phase)

A simple, convenient and reliable calorimetric efficiency scale is proposed for the evaluation of nucleating additives for polymers. The scale is based on conventional differential scanning calorimetry cooling runs and makes use of a crystallization range determined in self-nucleation experiments. It can be correlated with spherulite sizes, and indicates the potential range of improvement of nucleating additives. Typical nucleating agents for isotactic polypropylene are evaluated; at best they rate at 60 to ca. 70% on this efficiency scale. © 1993 John Wiley & Sons, Inc.     

Solvent-based nanocomposite coatings I. Dispersion of organophilic montmorillonite in organic solvents

This study aims to determine the relevant parameters controlling the organophilic montmorillonite dispersion in various organic solvents which can be used as dispersion media for polymer coatings. These suspensions were studied at three scales: At nanometer scale by looking to interlayer distance: When the solvent surface energy is higher than the organophilic clay surface energy, i.e., gamma solvent > or = gamma montmorillonite, the intercalated organic chains of the quaternary ammonium modifier swell, leading to an increase of the interlayer distance. The balance between hydrophilic and hydrophobic character is the key to dispersion of nanoclays. At micrometer scale by studying the rheological behaviour of clay suspensions: Gels are formed by percolation of microgels, based on swollen 3-4 platelet tactoids. The viscoelastic properties and the flow behavior reveal the gel structuration by measuring the gel stiffness and the flowing stress. At macroscopic scale analyzed from the swelling of the nanoclay into solvents: The compatibility between solvent and organophilic clay governs the macroscopic swelling, i.e., interactions between organic chains borne by the intercalated ions and solvents govern the final suspension morphologies. The same methodology can be adopted for monomers or prepolymers selected for one in situ intercalation/exfoliation processing route.     

Synthesis and diversity analysis of lead discovery piperazine-2-carboxamide libraries

A Lead Discovery Library ofpiperazine-2-carboxamide derivatives was produced forgeneral screening. This paper discloses two novelsolid phase synthetic routes used to produce 15 000single compounds via the Irori directed sortingtechnique. Computational methods such as reagentclustering and library profiling were used to maximizereagent diversity and optimize pharmacokineticparameters. The results of a four center pharmacophoreanalysis revealed the added diversity gained by usingtwo independent synthetic routes.