Potentials of boiling heat transfer in advanced thermal energy systems

Journal of Thermal Analysis and Calorimetry - Boiling process is a highly efficient mechanism of heat transfer, which has an important role in industrial and domestic sectors. In this process, a...     

Spectrophotometric Study of the Complexation of Some Lanthanide (III) Ions with a Series of 18-Crowns-6 in DMSO Solution Using Murexide as a Metallochromic Indicator

The complexation of La(III), Ce(III), Pr(III) and Er(III) with 18-crown-6(18C6), dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6 (DCY18C6) anddibenzopyridino-18-crown-6 (DBPY18C6) has been studied in dimethylsulfoxide(DMSO) by means of a competitive spectrophotometric method using murexide asa metal ion indicator. The formation constants of the 1 : 1 complexeswere found tovary in the order La(III) > Ce(III) > Pr(III) > Er(III). It was foundthat the structure influences the formation and stability of the resultingcomplexes. The effects ofvarious parameters on complexation are discussed. The order of the stabilityconstants of each lanthanide ion with these macrocycles are18C6 > DC18C6 > DB18C6 > DBPY18C6.     

Simulation of conjugate radiation–forced convection heat transfer in a porous medium using the lattice Boltzmann method

In this paper, a lattice Boltzmann method is employed to simulate the conjugate radiation–forced convection heat transfer in a porous medium. The absorbing, emitting, and scattering phenomena are fully included in the model. The effects of different parameters of a silicon carbide porous medium including porosity, pore size, conduction–radiation ratio, extinction coefficient and kinematic viscosity ratio on the temperature and velocity distributions are investigated. The convergence times of modified and regular LBMs for this problem are 15 s and 94 s, respectively, indicating a considerable reduction in the solution time through using the modified LBM. Further, the thermal plume formed behind the porous cylinder elongates as the porosity and pore size increase. This result reveals that the thermal penetration of the porous cylinder increases with increasing the porosity and pore size. Finally, the mean temperature at the channel output increases by about 22% as the extinction coefficient of fluid increases in the range of 0–0.03.

     

Application of a dispersive micro‐solid‐phase extraction method for pre‐concentration and ultra‐trace determination of cadmium ions in water and biological samples

A method for the trace determination of cadmium ions in water, human urine and human blood serum samples using ultrasonic‐assisted dispersive micro‐solid‐phase extraction (UA‐D‐μSPE) was developed. Silica‐coated magnetic nanoparticles were coated with polythiophene, and the resulting sorbent was characterized using thermogravimetry, differential thermal analysis, scanning electron microscopy, Fourier transform infrared spectrometry and X‐ray diffraction. Following UA‐D‐μSPE, cadmium ions were quantified using graphite furnace atomic absorption spectrometry. A Box–Behnken design was used for optimization of important sorption and desorption parameters in UA‐D‐μSPE: in the sorption step, pH of solution, sorption amount and sonication time for sorption; in the desorption step, concentration of eluent, volume of eluent and sonication time. The optimum conditions for the method were: pH of solution, 7.5; sonication time for sorption, 3 min; sorption amount, 35 mg; type and concentration of eluent, HCl and 1.1 mol l^?1; volume of eluent, 360 μl; sonication time for desorption, 110 s. Under the optimized conditions the limit of detection and relative standard deviation for the detection of cadmium ions by UA‐D‐μSPE were found to be 0.8 ng l^?1 and <6%, respectively.     

Determination of the Heat Transfer Coefficient of Metal Oxide Based Water Nanofluids in a Laminar Flow Regime Using an Adaptive Neuro-Fuzzy Inference System

In order to enhance the thermal properties of turbine oil (TO), three different nanoparticles (CuO, Al₂O₃, and TiO₂) are loaded into the TO. To measure the thermal performance of nanoparticle-based TO nanofluids at laminar flow and under constant heat flux boundary conditions, an experimental setup was applied. The obtained data clearly demonstrate the positive effect of all nanoparticles on the heat transfer rate of TO. As the most important factor, the heat transfer coefficient of the abovementioned two-phase systems is increased upon increasing both the volume concentration and the flow rate. An adaptive neuro-fuzzy inference system (ANFIS) is applied for modeling the effect of critical parameters on the heat transfer coefficient of nanoparticle-TO based nanofluids numerically. The results are compared with experimental ones for training and test data. The results suggest that the developed model is valid enough and promising for predicting the extant of the heat transfer coefficient. R² and MSE values for all data were 0.990208751 and 108.1150734, respectively. Based on the results, it is obvious that our proposed modeling by ANFIS is efficient and valid, which can be expanded for more general states.     

Analytical solution of three-dimensional Navier–Stokes equations for the flow near an infinite rotating disk

In this letter, we will consider variational iteration method (VIM) and Padé approximant, for finding analytical solutions of three-dimensional viscous flow near an infinite rotating disk. The solutions is compared with the numerical (fourth-order Runge–Kutta) solution. The results illustrate that VIM–Padé is an appropriate method in solving the systems of nonlinear equations. It is predicted that VIM–Padé can have wide application in engineering problems (especially for boundary-layer and natural convection problems).     

Fabrication and Optimization of Poly(vinyl alcohol)/Zirconium Acetate Electrospun Nanofibers Using Taguchi Experimental Design

This paper presents an investigation regarding poly(vinyl alcohol)/zirconium acetate (organic–inorganic) (PVA/Zrace) nanofibers prepared by electrospinning which could be used as a precursor for fabricating ceramic metal oxide nanofibers. The effect of some processing variables, including polymer solution concentration, tip to collector distance and applied voltage of electrospinning, and the amount of Zrace and their interactions, on the diameter of the nanofibers were studied. Taguchi experimental design and a statistical analysis (ANOVA) were employed and the relationship between experimental conditions and yield levels determined. It was concluded that to obtain a narrow diameter distribution as well as maximum fiber fineness, a polymer concentration of 10 wt%, tip to collector distance of 18 cm and applied voltage of 20 kV variables were the optimum. Furthermore, it was also concluded that the ratio of Zrace (6 g) to PVA solution (10% wt) played an important role for achieving the minimum fiber diameter. Under these optimum conditions, the diameters of the electrospun composite fibers ranged from 86 nm to 381 nm with a diameter average of 193 nm. The experiments were done with Qualitek-4 software with “smaller is better” as the quality characteristics. The optimized conditions showed an improvement in the fibers diameter distribution and the average fibers diameter showed good resemblance with the result predicted using the Taguchi method and the Qualitek-4 software. The ANOVA results showed that all factors had significant effects on the fibers diameter and distribution, but the effect of PVA concentration and zirconium acetate were more significant than the other factors.