Dry deposition of elemental iodine on skin,hair, and clothing from air

Hairless rats, clothes, human hair, filter paper and water were exposed to gaseous elemental iodine in a glass chamber for 60–120 minutes. The deposition of gaseous elemental iodine on skin and lung of rats, human hair, water, clothes and paper were investigated by measuring iodine content in the exposed material by epithermal neutron activation analysis (ENAA). For measurement of the iodine concentration in the chamber air, elemental iodine in the air was collected by continuously sucking air through an active charcoal column. The trapped iodine in the active charcoal was then determined by ENAA. The measured deposition velocity in the test chamber of gaseous elemental iodine on skin, clothing, hair and water ranges from 0.006 on filter paper and water to about 0.05 cm/s on skin and clothes. The variation of elemental iodine concentration in air of the glass chamber was investigated by collecting and analyzing air samples at various time intervals. The results show that the variation with time in the concentration of the iodine can be described by an exponential function.     

Using light to bioactivate surfaces: A new way of creating oriented, active immunobiosensors

Ultraviolet light can be used to immobilize biomolecules onto thiol reactive surfaces in order to, e.g., make biosensors. The mechanism involves light-induced formation of free, reactive thiol groups in disulphide containing molecules. This technology allows for the creation of arrays of biomolecules with a high degree of reproducibility, circumventing the need for often expensive nano/micro-dispensing technologies. The ultimate size of the immobilized spots is defined by the focal area of the UV beam. Light-induced immobilization has the added benefit that the immobilized molecules will be spatially oriented and covalently bound to the surface. In this paper, we demonstrate the utility of a sensor array created with the new sensor technology when integrated into a microfluidic system. Protein arrays made using light-induced immobilization showed successful antigen/antibody binding in a flow cell allowing the visualisation of real time binding and enzyme activity. This new technology is ideal for the creation of protein/DNA microarrays, can replace present micro-dispensing arraying technologies and is ideal as a molecular imprinting technology.     

Elastic Buckling with Infinitely Many Local Modes

ABSTRACT

ABSTRACT In some cases, asymptotic methods present an appealing alternative to full nonlinear analyses. In other cases, the value of an asymptotic analysis may merely be that, in a qualitative way, it can characterize the behavior of a structure. Whether an asymptotic method is applied for one or the other purpose it is of interest to attempt an estimation of its range of validity. The present paper addresses this question for an asymptotic method to predict imperfection sensitivity of elastic structures with mode interaction. The particular structure that is investigated possesses an infinity of nearly simultaneous local buckling modes. It is found that very few of these modes need to be taken into account.     

Robust hydrophobic surfaces displaying different surface roughness scales while maintaining the same wettability

A range of surfaces coated with spherical silica particles, covering the size range from nanometer to micrometer, have been produced using Langmuir-Blodgett (LB) deposition. The particles were characterized both in suspension and in the Langmuir trough to optimize the surface preparation procedure. By limiting the particle aggregation and surface layer failures during the preparation steps, well-defined monolayers with a close-packed structure have been obtained for all particle sizes. Thus, this procedure led to structured surfaces with a characteristic variation in the amplitude and spatial roughness parameters. In order to obtain robust surfaces, a sintering protocol and an AFM-based wear test to determine the stability of the deposited surface layer were employed. Hydrophobization of the LB films followed by water contact angle measurements showed, for all tested particle sizes, the same increase in contact angle compared to the contact angle of a flat hydrophobic surface. This indicates nearly hexagonal packing and gives evidence for nearly complete surface wetting of the surface features.     

Biophysical Properties of Phenyl Succinic Acid Derivatised Hyaluronic Acid

Modification of hyaluronic acid (HA) with aryl succinic anhydrides results in new biomedical properties of HA as compared to non-modified HA, such as more efficient skin penetration, stronger binding to the skin, and the ability to blend with hydrophobic materials. In the present study, hyaluronic acid has been derivatised with the anhydride form of phenyl succinic acid (PheSA). The fluorescence of PheSA was efficiently quenched by the HA matrix. HA also acted as a singlet oxygen scavenger. Fluorescence lifetime(s) of PheSA in solution and when attached to the HA matrix has been monitored with ps resolved streak camera technology. Structural and fluorescence properties changes induced on HA-PheSA due to the presence of singlet oxygen were monitored using static light scattering (SLS), steady state fluorescence and ps time resolved fluorescence studies. SLS studies provided insight into the depolymerisation kinetics of PheSA derivatised HA matrix in the presence of singlet oxygen. Time resolved fluorescence studies grave insight into the dynamics of the reaction mechanisms induced on HA-PheSA by singlet oxygen. These studies provided insight into the medical relevance of PheSA derivatised HA: its capacity of scavenging singlet oxygen and of quenching PheSA fluorescence. These studies revealed that HA-PheSA is a strong quencher of electronic excited state PheSA and acts as a scavenger of singlet oxygen, thus medical applications of this derivatised form of HA may protect tissues and organs, such as skin, against reactive oxygen species damage.     

On the survival of peptide cations after electron capture: Role of internal hydrogen bonding and microsolvation

Electron capture by both bare and microsolvated small peptide dications was investigated by colliding these ions with sodium vapor in an accelerator mass spectrometer to provide insight into processes that occur on the microsecond time frame. Survival of the intact peptide monocation after electron capture depends strongly on molecular size. For dipeptides, no intact reduced species were observed; the predominant ions correspond to loss of hydrogen and ammonia. In contrast, the intact reduced species was observed for larger peptides. Calculated structures indicate that the diprotonated dipeptide ions form largely extended structures with low probability of internal ionic hydrogen bonding (i.e., charge solvation) whereas internal ionic H-bonding occurs extensively for larger peptide dications. Solvation of the peptide ions with between one to seven methanol molecules reduces the total extent of H loss even for dipeptides where intact reduced species can survive more than a microsecond after electron capture. The yield of ions corresponding to cleavage of NCalpha bonds (c+ and z+* ions) does not depend strongly on peptide size but decreases with the extent of microsolvation for the dipeptide dications. H-bonding appears to play an important role for the survival of the intact reduced ions but less so for the formation of c+ and z+* ions. Our results indicate that electron capture predominantly occurs at the ammonium groups (at least 70 to 80%), and provides important new insights into the electron capture dissociation process.     

Tunable light source for coherent anti-Stokes Raman scattering microspectroscopy based on the soliton self-frequency shift

We present a photonic crystal fiber (PCF)-based light source for generating tunable excitation pulses (pump and Stokes) that are applicable to coherent anti-Stokes Raman scattering (CARS) microspectroscopy. The laser employed is an unamplified Ti:sapphire femtosecond laser oscillator. The CARS pump pulse is generated by spectral compression of a laser pulse in a PCF. The Stokes pulse is generated by redshifting a laser pulse in a PCF through the soliton self-frequency shift. This setup allows for probing up to 4000 cm(-1) with a spectral resolution of approximately 25 cm(-1). We characterize the stability and robustness of CARS microspectroscopy employing this light source.     

Iridium‐Catalyzed Dehydrogenative Decarbonylation of Primary Alcohols with the Liberation of Syngas

A new iridium ‐ catalyzed reaction in which molecular hydrogen and carbon monoxide are cleaved from primary alcohols in the absence of any stoichiometric additives has been developed. The dehydrogenative decarbonylation was achieved with a catalyst generated in situ from [Ir(coe)₂Cl]₂ (coe=cyclooctene) and racemic 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl (rac‐BINAP) in a mesitylene solution saturated with water. A catalytic amount of lithium chloride was also added to improve the catalyst turnover. The reaction has been applied to a variety of primary alcohols and gives rise to products in good to excellent yields. Ethers, esters, imides, and aryl halides are stable under the reaction conditions, whereas olefins are partially saturated. The reaction is believed to proceed by two consecutive organometallic transformations that are catalyzed by the same iridium(I)–BINAP species. First, dehydrogenation of the primary alcohol to the corresponding aldehyde takes place, which is then followed by decarbonylation to the product with one less carbon atom.