Experimental studies of microwave amplification in the ion-focusedregime

Studies of microwave amplification with an in-focused electron beam drawn from an induction injector are reported. A free-electron laser (FEL) operating at 9.4 GHz and employing ion-focusing within the interaction region has achieved power in excess of 30 MW at 9.4 GHz, with a beam energy of 0.8 MeV and current of 0.7 kA. Peak gain is 20 dB/m, with no saturation after 15 wiggler periods. Also reported are the first evolution and detuning data for an ion-channel laser/maser (ICL). Two shortcomings of the prematurely halted ICL studies are poor frequency discrimination and a large axial plasma gradient. Prospects for operation with an upgraded 1.6 MeV accelerator are discussed     

Anisotropic friction model of DNA electrophoresis in polymer solutions: Comparison with direct observations

The electrophoresis of DNA chains in uncrosslinked polymer solutions with a Brownian dynamics simulation with an anisotropic friction tensor was analyzed. According to the degree of anisotropy, three types of migration behavior are obtained: fluctuation without or with periodicity between U‐shaped and compact conformations, or migration with linear conformation. We found good agreement between our simulation results and the direct observations of DNA by fluorescence microscopy. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1316–1322, 2003     

Direct observation of chemical oscillation at a water/nitrobenzene interface with a sodium-alkyl-sulfate system.

The oscillation of the interfacial tension and electrical potential at a water/nitrobenzene interface was observed with homologous anionic surfactant molecules, sodium-alkyl-sulfates. Concerning small molecules with a short hydrophobic carbon chain, the oscillation period and amplitude decreased with a decrease of the length of the alkyl chain. On the other hand, when surfactant molecules with a long hydrophobic carbon chain were used, no remarkable periodic oscillation occurred after the first oscillation. In all systems, an interfacial flow by Marangoni convection was observed when the oscillation took place. By monitoring the movement of carbon powder scattered on the liquid/liquid interface with a CCD camera, we could observe that the liquid/liquid interface expanded outward from the area on which the surfactant molecules adsorbed when the oscillation occurred. When the small molecule was used, the speed of expansion of the interface (flow speed) was small and shrinkage followed by expansion of the interface repeatedly occurred. However, when the large molecule was used, the flow speed was large and expansion occurred only one time. These results show that hydrodynamic factors and surface activities are important in chemical oscillation systems.     

Effect of Hydrolysis Conditions on the Direct Formation of Nanoparticles of Ceria–Zirconia Solid Solutions from Acidic Aqueous Solutions

The effect of the cation concentration, hydrolysis temperature, and composition in the CeO₂–ZrO₂ system on the direct precipitation of ceria–zirconia solid solutions and the structure of the precipitates from acidic aqueous solutions of (NH₄)₂Ce(NO₃)₆ and ZrOCl₂ by hydrolysis under hydrothermal conditions were investigated. Nanometer-sized (8–10 nm) ceria–zirconia solid solution particles in a composition range of 0 to 60 mol% ZrO₂ were directly precipitated from the solutions with total metal cation concentration less than 0.2 mol/dm³ by simultaneous thermal hydrolysis at 150–240°C. The crystalline phase of the precipitates gradually changed from cubic and/or tetragonal to monoclinic with increasing the cation concentration of the solution from 0.2 to 0.8 mol/dm³ at the starting composition of 50 mol% ZrO₂ under hydrolysis condition of 150°C for 48 h, which was attributed to decrease in the supply of hydrolyzed Ce component caused by decrease in the hydrolysis ratio of (NH₄)₂Ce(NO₃)₆. Ceria–zirconia solid solutions containing large amount of ZrO₂ maintained high specific surface area and small-sized crystallite after heat-treatment at 900–1000°C for 1 h.     

Linear optical switching in a FLC/waveguide composite device

A fast electrooptic modulation in a polymer waveguide using a ferroelectric liquid crystal has been proposed. In this device, the surface stabilized ferroelectric liquid crystal and the soft mode ferroelectric liquid crystal are used as an active material on the passive polymer waveguide, and electrooptic switching is realized by controlling the total reflection at the polymer waveguide-liquid crystal interface. The response time is of the order of several microseconds. The analogue electrooptic modulation in the waveguide is realized using the field induced linear molecular tilt of the electroclinic effect in the soft mode ferroelectric liquid crystal.     

Arithmetic Hodge Structure and Nonvanishing of the Cycle Class of 0-Cycles

We construct 0-cycles on a self-product of a curve whose cycle classes are linearly independent in the extension group of arithmetic Hodge structure. This is an extended version of Theorem 4.5 of Asakura's contribution to CMR Lecture Notes Ser. 24 ((2000), pp. 133–154).     

Pseudo cyclic ionophores: ‘Binary-effect’ of quinolinyloxy groups at both ends of oligoethylene glycols on the conformational stabilization of their complexes with alkali metal salts

A series of noncyclic neutral ionophores has been synthesized by the reaction of oligoethylene glycol dihalides with 8-quinolinol. Complexation properties for alkali metal picrates were evaluated from solvent extraction and bulk liquid membrane transport experiments. Complexation profiles of the newly synthesized ionophores with a hexyl chain were similar to those of their homologues without the hexyl chain in the extraction experiments. Among them, the pentaethylene glycol derivatives showed the highest extraction efficiency and selectivity towards potassium ion. From the¹H NMR spectra (400 MHz), the change in chemical shifts of the aromatic protons upon the addition of alkali metal thiocyanates suggested the existence of a stabilization effect which is caused by intramolecular stacking conformations between the quinoline rings during complexation. Aryl stacking interactions depend on the size of the cations and on the chain length of the oligoethylene glycol. The relationship between transport ability towards alkali metal cations and lipophilicity of these ionophores is also discussed.     

Anti-inflammatory effect of Zingiber cassumunar Roxb. and its active principles.

The present study was carried out to elucidate the anti-inflammatory effect of the methanol extract obtained from the rhizomes of Zingiber cassumunar Roxb. and its active principles. The methanol extract was partitioned between ether and water, and then the ether-soluble fraction was extracted with n-hexane. The n-hexane-soluble fraction was chromatographed and part of the fraction was rechromatographed by silica gel column. Three compounds were isolated from the n-hexane-soluble fraction and the chemical structures of these compounds were identified as (E)-1-(3,4-dimethoxyphenyl)but-1-ene, (E)-1-(3,4-dimethoxyphenyl)butadiene and zerumbone. The anti-inflammatory activity of these fractions was investigated on carrageenin-induced edema in rats, as well as on acetic acid-induced vascular permeability and writhing symptoms in mice. The methanol extract (p.o.) showed both anti-inflammatory activity and analgesic activity. These activities shifted successively to ether-soluble and n-hexane-soluble fractions and to (E)-1-(3,4-dimethoxyphenyl)but-1-ene. These results suggest that the anti-inflammatory action and analgesic action of Zingiber cassumunar is the result of the (E)-1-(3,4-dimethoxyphenyl)but-1-ene that it contains.