Surface polarity of cellulose derivates observed by coumarin 151 and 153 as solvatochromic and fluorochromic probes

Solvent‐dependent ultraviolet–visible (UV–vis) absorption and Stokes shifts including strong hydrogen‐bond‐donating (HBD) solvents such as 2,2,2‐trifluoroethanol and 1,1,1,3,3,3‐hexafluoro‐2‐propanol of two coumarine dyes (Co 151 and Co 153) were analyzed with multiple‐square analyses of linear solvation energy relationships and the Kamlet–Taft solvent parameter set to α (HBD capacity), β (hydrogen‐bond‐accepting capacity), and π* (dipolarity/polarizability). The UV–vis absorption and emission spectra of Co 151 and Co 153 were measured when adsorbed on various polysaccharides such as different cellulose batches, carboxymethylcelluloses with different degrees of substitution, and chitine. As a result of this evaluation, Co 153 is recommended as an alternative UV–vis probe for evaluating the dipolarity/polarizability of cellulose and cellulose derivates. Multiple adsorption of Co 153 on Linters cellulose took place indicating a wide‐surface polarity distribution, which makes the determination of a rigid polarity parameter questionable. Thus, fluorescence measurements of adsorbed Co 153 are suitable to detect inhomogenities on a surface but not for the determination of empirical polarity parameters. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1210–1218, 2003     

Baylis-Hillman mechanism: a new interpretation in aprotic solvents

Using reaction rate data collected in aprotic solvents, we have determined that the Baylis-Hillman rate-determining step is second order in aldehyde and first order in DABCO and acrylate. On the basis of these data, we have proposed a new mechanism involving a hemiacetal intermediate. The proposed mechanism was then supported using two different kinetic isotope experiments.     

Characterization of the solvation environment provided by dilute aqueous solutions of novel siloxane polysoaps using the fluorescence probe pyrene

Solubilization environment afforded by several of the novel allyl glycidyl ether-modified methylhydrosiloxane polymers are investigated using a common polycyclic aromatic hydrocarbon fluorescence probe, pyrene. The backbone of the polymer has been modified by the addition of an alkyl chain of varying length (either C8, C12, or C18) and to differing degrees of substitution. The nomenclature adopted for the purposes of these studies is as follows: "AGENT" represents the backbone polymer with no alkyl substitution, and "OAGENT", "DAGENT", and "SAGENT" are substituted with n-octyl, n-dodecyl, and n-octadecyl, respectively. The percentage of alkyl substitution is designated as 10, 15, and 20%. The pyrene polarity scale (defined as the ratio of the intensity of peak I to peak III) was used to determine the relative dipolarity of the cybotactic region provided by approximately 1 w/w% aqueous polymer solutions compared to 10 mM sodium dodecylsulfate (SDS) micellar solution. Results indicate that 10-15% DAGENT afforded the most hydrophobic solubilization site, followed by 15% OAGENT and 15% SAGENT. In addition, as the degree of alkyl substitution of DAGENT increased from 10 to 20%, the cybotactic region appeared to become more hydrophobic. Furthermore, a deeper investigation into the relative size of the solubilization site revealed that all alkyl-substituted polymers promoted excimer formation at relatively low pyrene concentrations, indicating the possibility of localized concentration enhancement within the solvation pockets and/or compartmentalization of the solute molecules. The pyrene fluorescence excitation data strongly indicates ground-state heterogeneity that is most prominent in AGENT and decreases as the alkyl chain length is increased. This provides a relative sense of the size and shape of the solvation pockets afforded by each polymer solution. An overall analysis of the collected data indicated that these alkyl-substituted polymers may provide a more selective and efficient pseudostationary phase in electrokinetic chromatography with better solvation capacity for hydrophobic compounds compared to SDS.     

BonDNet: a graph neural network for the prediction of bond dissociation energies for charged molecules

A broad collection of technologies, including e.g. drug metabolism, biofuel combustion, photochemical decontamination of water, and interfacial passivation in energy production/storage systems rely on chemical processes that involve bond-breaking molecular reactions. In this context, a fundamental thermodynamic property of interest is the bond dissociation energy (BDE) which measures the strength of a chemical bond. Fast and accurate prediction of BDEs for arbitrary molecules would lay the groundwork for data-driven projections of complex reaction cascades and hence a deeper understanding of these critical chemical processes and, ultimately, how to reverse design them. In this paper, we propose a chemically inspired graph neural network machine learning model, BonDNet, for the rapid and accurate prediction of BDEs. BonDNet maps the difference between the molecular representations of the reactants and products to the reaction BDE. Because of the use of this difference representation and the introduction of global features, including molecular charge, it is the first machine learning model capable of predicting both homolytic and heterolytic BDEs for molecules of any charge. To test the model, we have constructed a dataset of both homolytic and heterolytic BDEs for neutral and charged (−1 and +1) molecules. BonDNet achieves a mean absolute error (MAE) of 0.022 eV for unseen test data, significantly below chemical accuracy (0.043 eV). Besides the ability to handle complex bond dissociation reactions that no previous model could consider, BonDNet distinguishes itself even in only predicting homolytic BDEs for neutral molecules; it achieves an MAE of 0.020 eV on the PubChem BDE dataset, a 20% improvement over the previous best performing model. We gain additional insight into the model''s predictions by analyzing the patterns in the features representing the molecules and the bond dissociation reactions, which are qualitatively consistent with chemical rules and intuition. BonDNet is just one application of our general approach to representing and learning chemical reactivity, and it could be easily extended to the prediction of other reaction properties in the future.

Prediction of bond dissociation energies for charged molecules with a graph neural network enabled by global molecular features and reaction difference features between products and reactants.     

Correlation between the fluorescent response of microfluidity probes and the water content and viscosity of ionic liquid and water mixtures

Accurate data on transport properties such as viscosity are essential in plant and process design involving ionic liquids. In this study, we determined the absolute viscosity of the ionic liquid + water system at water mole fractions from 0 to 0.25 for three 1-alkyl-3-methylimidazolium ionic liquids: 1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide. In each case, the excimer to monomer ratio for 1,m-bis(1-pyrenyl)alkanes (m= 3 or 10) was found to increase linearly with the mole fraction of water. Of the probes studied only PRODAN and rhodamine 6G, both of which have the ability to participate in hydrogen bonding, exhibited Perrin hydrodynamic behavior in the lower viscosity bis(trifluoromethane sulfonyl)imides. As a result, these probes allow for the extrapolation of the absolute viscosity of the ionic liquid mixture from the experimental fluorescence steady-state polarization values.     

Fluoride-facilitated deuterium exchange from DMSO-d6 to polyamide-based cryptands

Multiple deuterium exchange between DMSO-d6 and amide hydrogens in two hexaamido cryptand fluoride receptors has been verified by 19F and 2H NMR and FAB mass spectral studies. Structural results for one of the complexes indicate a tricapped trigonal prism hydrogen bond coordination geometry around an encapsulated fluoride, with hydrogen bonds from fluoride to six amide and three phenyl hydrogens.     

Capillary electrochromatography using polyelectrolyte multilayer coatings

This review covers recent progress in polyelectrolyte multilayer (PEM) coatings applied to analytical separations using open-tubular capillary electrochromatography (OT-CEC). The simple preparation procedure involved in the PEM approach has provided some attractive features over other modes of capillary electrophoresis-based separations including packed column capillary electrochromatography (PC-CEC) and micellar electrokinetic chromatography (MEKC). PEM coatings have been used to alleviate the adsorption of basic analytes, to improve separations, and to improve the stability of the electroosmotic flow. Fundamental aspects of PEM coatings on surfaces and analytical separation platforms are briefly outlined in this review. In addition, applications of PEM coatings to fused-silica capillaries or microchip separation devices for the separation of small achiral or chiral analytes, as well as large biomolecules, are discussed.     

One-pot synthesis of 1,4-disubstituted 1,2,3-triazoles from terminal acetylenes and in situ generated azides

1,4-Disubstituted 1,2,3-triazoles were obtained by a high-yielding copper(I) catalyzed 1,3-dipolar cycloaddition reaction between in situ generated azides and terminal acetylenes. This one-pot, two-step procedure tolerates most functional groups and circumvents the problems associated with the isolation of potentially toxic and explosive organic azides.     

Probing the surface polarity of native celluloses using genuine solvatochromic dyes

The surface polarity of native celluloses has been investigated by the following solvatochromic dyes: dicyano-bis (1,10)-phenanthroline iron (II) Fe(phen)2 (CN)2 (1), bis(4-N,N-dimethylamino)-benzophenone (2), and cou-marine 153 (3). Linear Solvation Energy (LSE) relationships and the UV/Vis data have been used to characterize the surface polarity of different native cellulose batches in terms of the empirical Kamlet–Taft polarity parameters (hydrogen bond acidity), (hydrogen bond basicity), and * (dipolarity/polarizability). , , *and calculated Reichardt's E T (30) values are reported for various native and regenerated cellulose samples with different degrees of crystallinity. The degree of crystallinity of the cellulose samples has been determined by X-ray. The microcrystalline environment of cellulose can be exactly parameterized in terms of the , and *values. It shows a fairly strong acidity and a low dipolarity/polarizability. For the amorphous sections smaller and larger * values are observed. The correspondence of the empirical polarity parameters determined has been discussed in relation to results from pyrene fluorescence and zetapotential measurements.