A dedicated NAA method to determine the neutron spectrum monitor elements Co,Au and Lu with high accuracy in alloyed wires and foils

A dedicated NAA calibration method was developed for the determination of the neutron spectrum monitor elements Co, Au and Lu in alloyed wires and foils, with an accuracy of better than 1%. The method does not require quantitative micropipetting for preparing the standards, and leads to vanishing errors caused by flux inhomogeneities and by differences in counting geometry and gamma attenuation. Its performance was tested by analysing various NIST, IRMM and RX aluminium-based materials with certified or specified Co, Au or Lu content.     

Charged particle activation analysis of phosphorus in biological materials

Charged particle activation analysis of phosphorus in biological materials using the³¹P (α,n)^34mCl reaction has been studied. Since^34mCl is also produced by the³²S (α,pn) and the³⁵Cl (α, α′ n) reactions, the thick-target yield curves on phosphorus, sulfur and chlorine were determined in order to choose the optimum irradiation conditions. As a result, it was found that the activation analysis for phosphorus without interferences from surfur and chlorine is possible by bombarding with less than 17 MeV alphas. The applicability of this method to biological samples was then examined by irradiating several standard reference materals. It was confirmed that phosphorus can readily be determined at the detection limit of 1 μg free from interferences due to the matrix elements.     

Evaluation of the radioactivity in concrete from accelerator facilities

For evaluation of radioactivity induced in the concrete samples from accelerator facilities, the residual radioactivity in concrete sample, collected from seven accelerator facilities, was determined by γ-ray spectrometry. The tritium was extracted by the heating method using an IR furnace, and measured with a liquid scintillation counter. It was found that the major radioisotopes activated mainly by neutrons in the concrete samples were ¹⁵²Eu, ⁶⁰Co, ¹³⁴Cs and ³H. The concentrations of radioactivities induced by thermal neutron capture are the highest at a depth of 10 cm in the concrete wall. The correlation between tritium, ⁶⁰Co and ¹⁵²Eu activity was investigated by measuring many concrete samples for seven accelerator facilities. The results indicate that their activities are strongly correlated with each other. So it would also be concluded that the total activity in shielding concrete could be estimated on the basis of the activities of ⁶⁰Co and ¹⁵²Eu.     

Simultaneous determination of P,Cl, K and Ca in several control serums by alpha-particle activation analysis using the internal standard method

In order to demonstrate the usefulness of alpha-particle activation analysis, simultaneous determination of P, Cl, K and Ca in commercially available control serums has been studied fundamentally. After thick target yield curves of radionuclides produced from the element to be determined were measured as a function of alpha energy together with those of the interferences, an optimum working standard for the present experiments was provided by applying the internal standard method to a human serum under the most suitable bombardment conditions. Then, the concentrations of the above four elements in several control serums were determined efficiently and reasonably by ordinary alpha-particle activation analysis.     

Determination of fluorine in standard rocks by photon activation analysis

A highly sensitive determination of fluorine in standard rocks by photon activation using the¹⁹F(,n)¹⁸F reaction combined with pyrohydrolysis for the separation of¹⁸F has been reported. The irradiation energy was operated at 20 MeV to avoid the interference from Na, because Na is one of the major element in rocks and¹⁸F is also produced from Na via²³Na(,n)¹⁸F reaction above its threshold energy, 20.9 MeV. After irradiation, fluorine was extracted by pyrohydrolysis and separated as LaF₃ precipitate. It was ascertained that the average recovery of fluorine in standard rocks was about 90% and the precipitate was of high radiochemical purity. This method was applied to the analysis of ten GSJ rock reference samples and two USGS standard rocks issued by the Geological Survey of Japan and the United States Geological Survey, respectively. The detection limit of this method was 0.02 g/g, and the results obtained by this method were in good agreement with the recommended values. This method was easily applied to the determination of a few ppm level of fluorine in rock samples, such as ultrabasic rock and feldspar.     

Highly accurate and precise multielement determination of environmental samples by means of photon activation using the internal standard method

In order to examine effective applications of the newly developed internal standard method, determinations of Cr, Co, Ni, Zn, As, Rb, Sr, Y, Zr, Nb, Cs, Ce and Pb in three environmental materials, such as pond, lake and estuarine sediments, have been tried by means of photon activation. In these examinations, some major constituent elements in the above sediments were properly used as excellent and effective internal standards. In consequence, it was confirmed that highly accurate and precise determinations of the above 13 elements were achieved easily and favourably.