Highly selective and sensitive paper-based colorimetric sensor using thiosulfate catalytic etching of silver nanoplates for trace determination of copper ions

A novel, highly selective and sensitive paper-based colorimetric sensor for trace determination of copper (Cu²⁺) ions was developed. The measurement is based on the catalytic etching of silver nanoplates (AgNPls) by thiosulfate (S₂O₃²⁻). Upon the addition of Cu²⁺ to the ammonium buffer at pH 11, the absorption peak intensity of AuNPls/S₂O₃²⁻ at 522 nm decreased and the pinkish violet AuNPls became clear in color as visible to the naked eye. This assay provides highly sensitive and selective detection of Cu²⁺ over other metal ions (K⁺, Cr³⁺, Cd²⁺, Zn²⁺, As³⁺, Mn²⁺, Co²⁺, Pb²⁺, Al³⁺, Ni²⁺, Fe³⁺, Mg²⁺, Hg²⁺ and Bi³⁺). A paper-based colorimetric sensor was then developed for the simple and rapid determination of Cu²⁺ using the catalytic etching of AgNPls. Under optimized conditions, the modified AgNPls coated at the test zone of the devices immediately changes in color in the presence of Cu²⁺. The limit of detection (LOD) was found to be 1.0 ng mL⁻¹ by visual detection. For semi-quantitative measurement with image processing, the method detected Cu²⁺ in the range of 0.5–200 ng mL⁻¹(R² = 0.9974) with an LOD of 0.3 ng mL⁻¹. The proposed method was successfully applied to detect Cu²⁺ in the wide range of real samples including water, food, and blood. The results were in good agreement according to a paired t-test with results from inductively coupled plasma-optical emission spectrometry (ICP-OES).     

Electrochemical sensors for the simultaneous determination of zinc,cadmium and lead using a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode

A simple, low cost, and highly sensitive electrochemical sensor, based on a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode (N/IL/G/SPCE) was developed to determine zinc (Zn(II)), cadmium (Cd(II)), and lead (Pb(II)) simultaneously. This disposable electrode shows excellent conductivity and fast electron transfer kinetics. By in situ plating with a bismuth film (BiF), the developed electrode exhibited well-defined and separate peaks for Zn(II), Cd(II), and Pb(II) by square wave anodic stripping voltammetry (SWASV). Analytical characteristics of the BiF/N/IL/G/SPCE were explored with calibration curves which were found to be linear for Zn(II), Cd(II), and Pb(II) concentrations over the range from 0.1 to 100.0 ng L⁻¹. With an accumulation period of 120 s detection limits of 0.09 ng mL⁻¹, 0.06 ng L⁻¹ and 0.08 ng L⁻¹ were obtained for Zn(II), Cd(II) and Pb(II), respectively using the BiF/N/IL/G/SPCE sensor, calculated as 3σ value of the blank. In addition, the developed electrode displayed a good repeatability and reproducibility. The interference from other common ions associated with Zn(II), Cd(II) and Pb(II) detection could be effectively avoided. Finally, the proposed analytical procedure was applied to detect the trace metal ions in drinking water samples with satisfactory results which demonstrates the suitability of the BiF/N/IL/G/SPCE to detect heavy metals in water samples and the results agreed well with those obtained by inductively coupled plasma mass spectrometry.     

Hydrogen bonding in labdane diterpenoids, labda-7,12(E),14-triene-17-oic acid and labda-12(Z),14,17-triene-18-oic acid

Two labdane diterpenoids, labda-7,12(E),14-triene-17-oic acid (1) and labda-12(Z),14,17-triene-18-oic acid (2), C₂₀H₃₀O₂, have been isolated from Croton oblongifolius. Both 1 and 2 crystallized in the monoclinic system, space group C2, with cell dimensions of a = 21.912(1) Å, b = 7.4002(4) Å, c = 11.5079(7) Å, = 101.999(1)^o and a = 21.308(2) Å, b = 11.9067(9) Å, c = 7.5606(6) Å, = 100.763(1)^o, respectively. Compound 1, a rare example of carboxylic group bound to a cyclohexene ring, forms an infinite intermolecular hydrogen-bonded polymer [O1 O2(–x + 1/2, y + 1/2, –z + 2) 2.697(2) Å], whereas molecules of compound 2 are linked to form an asymmetric hydrogen-bonded dimer [O1 O2(–x, y, –z) 2.657(3) Å].     

Wiring of glucose oxidase with graphene nanoribbons: an electrochemical third generation glucose biosensor

A reagentless third generation electrochemical glucose biosensor was fabricated based on wiring the template enzyme glucose oxidase (GOx) with graphene nanoribbons (GN) in order to create direct electron transfer between the co-factor (flavin adenine dinucleotide, FAD) and the electrode. The strategy involved: (i) isolation of the apo-enzyme by separating it from its co-enzyme; (ii) preparation of graphene nanoribbons (GN) by oxidative unzipping of multi-walled carbon nanotubes; (iii) adsorptive immobilization of GNs on the surface of a screen printed carbon electrode (SPCE); (iv) covalent attachment of FAD to the nanoribbons; (v) recombination of the apo-enzyme with the covalently bound FAD to the holoenzyme; and (vi) stabilization of the bio-layer with a thin membrane of Nafion. The biosensor (referred to as GN/FAD/apo-GOx/Nafion/SPCE) is operated at a potential of +0.475 V vs Ag/AgCl/{3 M KCl} in flow-injection mode with an oxygen-free phosphate buffer (pH 7.5) acting as a carrier. The signals are linearly proportional to the concentration of glucose in the range from 50 to 2000 mg?L^?1 with a detection limit of 20 mg?L^?1. The repeatability (10 measurements, at 1000 mg?L^?1 glucose) is ±1.4% and the reproducibility (5 sensors, 1000 mg?L^?1 glucose) is ±1.8%. The biosensor was applied to the determination of glucose in human serum.

Open image in new window

Graphical abstract Wiring of the apo-enzyme of glucose oxidase (apo-GOx) with graphene nanoribbons (GN) bound to FAD at a screen-printed carbon electrode (SPCE). Cyclic voltammetric and amperometric responses to various glucose concentrations.

     

Non-isothermal kinetics of the thermal decomposition of sodium oxalate Na<Subscript>2</Subscript>C<Subscript>2</Subscript>O<Subscript>4</Subscript>

The thermal transformation of Na₂C₂O₄ was studied in N₂ atmosphere using thermo gravimetric (TG) analysis and differential thermal analysis (DTA). Na₂C₂O₄ and its decomposed product were characterized using a scanning electron microscope (SEM) and the X-ray diffraction technique (XRD). The non-isothermal kinetic of the decomposition was studied by the mean of Ozawa and Kissinger–Akahira–Sunose (KAS) methods. The activation energies (E _α) of Na₂C₂O₄ decomposition were found to be consistent. Decreasing E _α at increased decomposition temperature indicated the multi-step nature of the process. The possible conversion function estimated through the Liqing–Donghua method was ‘cylindrical symmetry (R₂ or F_1/2)’ of the phase boundary mechanism. Thermodynamic functions (ΔH*, ΔG* and ΔS*), calculated by the Activated complex theory and kinetic parameters, indicated that the decomposition step is a high energy pathway and revealed a very hard mechanism.     

Highly sensitive determination of mercury using copper enhancer by diamond electrode coupled with sequential injection–anodic stripping voltammetry

A highly sensitive determination of mercury in the presence of Cu(II) using a boron-doped diamond (BDD) thin film electrode coupled with sequential injection–anodic stripping voltammetry (SI–ASV) was proposed. The Cu(II) was simultaneously deposited with Hg(II) in a 0.5 M HCl supporting electrolyte by electrodeposition. In presence of an excess of Cu(II), the sensitivity for the determination of Hg(II) was remarkably enhanced. Cu(II) and Hg(II) were on-line deposited onto the BDD electrode surface at −1.0 V (vs. Ag/AgCl, 3 M KCl) for 150 s with a flow rate of 14 μL s⁻¹. An anodic stripping voltammogram was recorded from −0.4 V to 0.25 V using a frequency of 60 Hz, an amplitude of 50 mV, and a step potential of 10 mV at a stopped flow. Under the optimal conditions, well-defined peaks of Cu(II) and Hg(II) were found at −0.25 V and +0.05 V (vs. Ag/AgCl, 3 M KCl), respectively. The detection of Hg(II) showed two linear dynamic ranges (0.1–30.0 ng mL⁻¹ and 5.0–60.0 ng mL⁻¹). The limit of detection (S/N = 3) obtained from the experiment was found to be 0.04 ng mL⁻¹. The precision values for 10 replicate determinations were 1.1, 2.1 and 2.9% RSD for 0.5, 10 and 20 ng mL⁻¹, respectively. The proposed method has been successfully applied for the determination of Hg(II) in seawater, salmon, squid, cockle and seaweed samples. A comparison between the proposed method and an inductively coupled plasma optical emission spectrometry (ICP-OES) standard method was performed on the samples, and the concentrations obtained via both methods were in agreement with the certified values of Hg(II), according to the paired t-test at a 95% confidence level.     

Fast Determination of Sudan I-IV in Chili Products Using Automated On-Line Solid Phase Extraction Coupled with Liquid Chromatography-Mass Spectrometry

A rapid, accurate and precise method for the determination of sudan I-IV in chili products using on-line solid phase extraction and LC-MS has been developed. Chili products were extracted with acetone and the analytes were cleaned up and enriched on an SPE column (C₁₈, 15–40 µm) through on-line SPE. Chromatographic separation was performed on a C₁₈ analytical column (2.1 × 150 mm, 3 µm) with gradient elution programming of 0.1% formic acid in water and 0.1% formic acid in acetonitrile. All four sudan dyes were separated in less than 8 min. Using in-house validation data, linearity coefficients of determination (R²) of more than 0.9997 were obtained. The limits of detection (LOD) and limits of quantitation (LOQ) for sudan I, II and IV were 0.03 and 0.05 mg kg^?1, respectively, and 0.04 and 0.1 mg kg^?1 for sudan III. The intra- and inter-day recoveries of the four sudan dyes in chili powder were between 90.1–101.6% and 90.2–102.0%, respectively, with relative standard deviation (RSD) between 0.014–0.164% and 0.011–0.202%, respectively. Therefore, this proposed method could be an alternative assay for the determination of sudan I-IV in chili products due to its rapidness, sensitivity, less sample and solvent consumption.     

High performance enzyme-linked immunosorbent assay for determination of miroestrol,a potent phytoestrogen from Pueraria candollei

Pueraria candollei associated preparation is widely applied in folk Thai medicine for rejuvenating purpose in aged people, which correlated with its pharmacological activities reported by pre-clinical and clinical trials. Therefore, standardized products of this plant are needed by consumers and health care personnel. Miroestrol, a potent and stable phytoestrogen in P. candollei, exhibited potential to be biomarker for quality control of P. candollei samples in research or industrial levels. Indirect competitive enzyme-linked immunosorbant assay (ELISA) for miroestrol determination was developed and validated by using polyclonal antibody from rabbit immunization. The polyclonal antibody recognized specifically to miroestrol, which exhibited cross-reactivity to deoxymiroestrol and isomiroestrol with 6.68% and 1.05%, respectively. The linearity range of measurement was 0.73–3000 ng mL⁻¹, which coefficient of variation (CV) of both intra- and inter-plate determination was less than 5%. With spiked samples of known amount miroestrol, the percentages of recovery were 98.80–104.37% and 98.31–106.69% in P. candollei and its involved product samples, respectively. Validated ELISA was comparable with published HPLC method (R² = 0.9996) (Yusakul et al. [18]) in samples with various miroestrol contents. For application, the P. candollei involved preparations contained miroestrol 0.695 ± 0.037–12.108 ± 0.285 μg g⁻¹ dry wt. The developed ELISA was high performance for miroestrol determination, which could be applied for P. candollei quality control in research fields and industrial productions.