Magnetic structures in Ni80Fe20/Ru multilayers

Using polarized neutron reflectivity (PNR) measurements together with associated simulation, magnetic structures of two Ni₈₀Fe₂₀ (1 1 1)/Ru (0 0 0 1) multilayer samples with Ru thickness of 9 and 21 Å were investigated under various external magnetic fields at room temperature. The results reveal the existence of layer thickness, interface roughness, magnetic moment, interlayer coupling angle and non-collinear coupling. The former three are independent of Ru thickness; while the latter two are strongly dependent of Ru thickness.     

Tunable magnetic arrangement of iron oxide nanoparticles in situ synthesized on the solid substrate from diblock copolymer micelles

Hexagonal arrangement of iron oxide nanoparticles was fabricated by utilizing a single-layered film of diblock copolymer micelles. The synthesis was directly performed on the solid substrate by oxygen plasma with preserving the dimensional order of micelles so that separate procedures for synthesis and deposition of nanoparticles were not necessary. Since the oxygen plasma treatment also eliminated polymers, pure patterns of iron oxide nanoparticles were obtained. Moreover, easy control over the size of nanoparticles enabled us to selectively create a ferrimagnetic or a superparamagnetic pattern of iron oxide nanoparticles without altering the fabrication process.     

Anion-directed self-assembly of coordination polymer into tunable secondary structure

A bent-shaped bipyridine ligand containing a dendritic aliphatic side chain has been synthesized as a ligand and complexed with silver ion through a self-assembling process. The resulting complexes were observed to self-assemble into supramolecular structures that differ significantly as a function of the counteranion size in the solid state, as confirmed by 1-D and 2-D X-ray diffraction experiments. The secondary structure of a cationic coordination chain appears to be dependent on the size of the counteranion. As the size of anion increases, the secondary structure of the coordination chain changes, from a helical chain, via a dimeric cycle, to a zigzag chain in the solid state. Interestingly, dilute solutions of the complexes exhibiting a columnar structure in polar solvents undergo spontaneous gelation and the resulting gels display a significant Cotton effect in the chromophore of the aromatic unit. These results represent a significant example that small variation in the anion size can provide a useful strategy to manipulate the secondary structure of linear chain and thereby solid-state supramolecular structure.     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups: Part 6. Sorption and separation of gold and silver by a polyhydroxamic acid

The sorption and desorption characteristics of gold and silver on a polyhydroxamic acid chelating resin are described. Gold is quantitatively sorbed from 0.5 M nitric acid or neutral solutions, and readily eluted with 0.5% ($\text{w}\text{v}$) potassium cyanide solution. Silver is removed from 0.05 M nitric acid or neutral solutions, and can be eluted with the cyanide solution or with 0.5 M nitric acid. Gold can be quantitatively separated from copper, iron and silver; gold and silver are sorbed from dilute cyanide solutions. Tests with river water and other eluting systems are reported.     

Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

Liquid crystalline behaviour of hydrogen-bonded complexes of alkoxycinnamic acids with octyloxystilbazole

Hydrogen-bonded liquid crystalline complexes have been obtained through 1:1 (molar ratio) complexation of 4-n-alkoxycinnamic acids (nCNA: n = 4, 8, 10, 12, where n is the number of carbons in the alkyloxy chain) and trans-4-octyloxystilbazole (8Sz). These hydrogen-bonded complexes (nCNA8Sz) form stable mesophases. The mesomorphic range was extended by the mixing of complexes. Hexatic modification of smectic B (SmB_h), smectic C (SmC), smectic A (SmA), and nematic mesophases of these complexes were determined by a combination of X-ray diffraction and polarizing optical microscopy. Transitions between the various smectic phases were deduced from the temperature-dependent layer spacing of nCNA8Sz. The layer spacing of these complexes in the SmB_h and SmA phases gradually increased with increasing alkoxy chain length. The favouring of smectic phases in these complexes is believed to originate from the increment of polarity of the mesogen by intermolecular H-bonding.     

Fatty amides synthesized from vegetable oil as extractant of molybdenum(VI)

In this study, fatty amides (FAs) synthesized from palm olein were used to extract and separate Mo(VI) from acidic media. Effects of various parameters upon the separation of Mo(VI) from Co(II), Ni(II), Al(III) and Mn(II), including extractant concentration, metal ion concentration, contact time, diluent, and acidity, were investigated. It was found that Mo(VI) was successfully separated from the above commonly associated metal ions by stripping from the loaded organic phase. Different acidic and alkaline solutions were used. Ammonium hydroxide solution was an optimal. Extraction of Mo(VI) into the organic phase involved the formation of 1:3 complexes. This work presents the development of a low-cost and environmentally friendly extractant to recycle and recover molybdenum.     

Synthesis and properties of new materials with banana-shaped achiral cores and chiral end groups

New chiral bent-core mesogens, derivatives of 1,3-phenylene bis[4-(alkanyloxyphenyliminomethyl)benzoate], were synthesized with variation of a substituent (X=F, Cl); their antiferroelectric properties are described. The mesomorphic and switching properties were characterized by differential scanning calorimetry, polarizing optical microscopy, triangular wave method, and X-ray diffractometry in the small and wide angle regions. The presence of chiral tails at the terminals of side wings in the bent-core molecules induced a decrease in transition temperature and formation of the switchable SmC* phase in the melt. In addition, the introduction of a lateral halogen substituent in the Schiff's base moiety prevented the regular stacking of the molecules, resulting in the formation of very complex optical textures. The smectic phase with F-substituted PBFDOB and Cl-substituted PBCDOB showed layer spacings of 39 and 38.5?Å, respectively, corresponding to the end-to-end distance of molecules with a bent conformation. Significantly, the smectic phases of PBFDOB and PBCDOB exhibited a period of 179.5 and 131?Å, respectively, compatible with a helical structure with periodicity about 4.6 and 3.4 times the layer spacings.     

Self-constructed stable liquid crystal alignment in a monomer-liquid crystal mixture system

Here, we demonstrate excellent liquid crystal (LC) vertical alignment without using an alignment layer printing process by introducing octadecyltrichlorosilane (OTS) into the LC mixture. Further, we investigated the alignment mechanism by analysing the surfaces of the substrates. The optimum concentration of OTS was found to be about 0.03 wt%, which is 1/100 of that in the previously reported polyhedral oligomeric silsesquioxane (POSS)–LC system. Moreover, the OTS–LC system exhibited a more stable LC alignment compared with the POSS–LC system. These differences may arise from the different strengths of surface–dopant interactions; that is, the covalent bond in the OTS–LC system and the van der Waals interactions in the POSS–LC system. We also demonstrated that the method can be used in a capillary tube, which may serve as a new method facilitating the application of LCs with curved surfaces.     

Ferroelectric smectic meso-phase formed by banana-shaped achiral liquid crystals

A new banana-shaped achiral molecule, 1,3-phenylene bis[4-(3-chloro-4-n-octyloxyphenyliminomethyl)benzoate] (PBCOB) has been synthesized, and its ferroelectric properties and homeotropic alignment investigated. The presence of a lateral chloro-substituent in the Schiff 's base moiety prevents the regular stacking of molecules and results in lowering the transition temperature and the degree of crystallinity of the switchable banana phase. Their smectic mesophases, including a switchable banana phase B₇, were characterized by differential scanning calorimetry, X-ray scattering and polarizing optical microscopy. Both the left- and right-handed helical domains are spontaneously formed upon cooling from the isotropic liquid to the switchable banana phase B₇. By X-ray study, the smectic phases showed a layer spacing of 38.1 Å, compatible with the end-to-end distance of the molecule with a bent conformation. Significantly, the smectic B7 phase exhibited a periodicity of 292 Å that corresponds to a helical structure with periodicity about 7.5 times 38.1 Å. The spontaneous polarization for PBCOB is about 50 nCcm^-2 and shows a temperature dependence. The ferroelectric lyomesophase of PBCOB showed a ferroelectric electro-optical switching range extending more than 50°C, switchable at room temperature.