Synthesis, characterization, biocide and toxicological activities of di-n-butyl- and diphenyl-tin(IV)-salicyliden-beta-amino alcohol derivatives

The one pot reaction of salicylaldehyde 1, beta-amino alcohols 2a-2c, and di-n-butyltin(IV) oxide 3a or diphenyltin(IV) oxide 3b produced five diorganotin(IV) compounds, 4a-4c, 5a, and 5c, in good yields. All compounds were characterized by IR, (1)H, (13)C, and (119)Sn NMR spectroscopy, and elemental analysis; furthermore, compounds 4b, 4c, 5a, and 5c were characterized by X-ray diffraction analysis. After the structural characterization, all of the compounds were tested in vitro against Bacillus subtilis (Gram-positive, strain ATCC 6633), Escherichia coli (Gram-negative, strain DH5alpha), Pseudomonas aeruginosa (Gram-negative, strain BH3), Desulfovibrio longus (strain DSM 6739), and Desulfomicrobium aspheronum (strain DSM 5918) to assess their antimicrobial activity. Compounds 4 and 5 demonstrated a wide range of bactericidal activities against the tested aerobic (one Gram-positive and two Gram-negative subtypes) and anaerobic bacteria (two sulfate-reducing bacteria, SRB). Compound 5 had better bactericidal performances than compound 4. For all of the compounds, the acute toxicity was measured using luminescent bacteria toxicity (LBT-Microtox) tests to track their further environmental impact. According to these results and in order to fulfill environmental regulations, the toxicity of the compounds studied herein can be modulated through the proper selection of the disubstituted tin(IV) moiety.     

Corrosion inhibitors: design, performance, and computer simulations

The development of a methodology to predict the performance of a corrosion inhibitor (CI) using specific types of modeled and experimental surfaces and their subsequent estimation is presented. For previously reported imidazoline CIs, the theoretical partition coefficients and molecular volumes were calculated, providing a guide for molecular engineering of new imidazolines. The new CIs, N-[2-(2-alkyl-4,5-dihydroimidazol-1-yl)ethyl]alkylamides and N-[2-(2-alkyloylaminoethylamino)ethyl]alkylamides, were designed, prepared, and their theoretical partition coefficients and molecular volumes calculated. These indexes were correlated between tested and prototype CIs to select the best ones for the corrosion inhibition tests. The inhibition efficiencies were measured through potentiodynamic polarization curves (PPC), linear polarization resistance (LPR), and weight loss measurements (WLM) for SAE-1010 and SAE-1018 steels. The leading molecules were 1-(2-decylaminoethyl)-2-decylimidazoline and 1-(2-dodecylaminoethyl)-2-dodecylimidazoline with WLM efficiencies (steel 1010), of 62.8 and 78.9%, respectively. The efficiencies for the PPC/LPR tests (steel 1018) were 97 and 94%. To understand the mechanism of action of CIs, a simple model is suggested for the growth of self-assembled monolayers of CIs on a crystalline substrate. This model takes into account the amphiphilic nature of the inhibitor molecule on the adsorption process. Despite the simplicity of the model, the Monte Carlo simulations reproduce qualitatively many of the experimentally observed features involved in the formation of monolayers and provide a tentative explanation for the mechanism of corrosion inhibition.     

Boron macrocycles having a calix-like shape. Synthesis, characterization, X-ray analysis, and inclusion properties

The syntheses, structure, and inclusion properties of trinuclear boron compounds having a calix-like shape are described. The compounds have been obtained via self-assembly reactions between salicylaldehyde derivatives and 3-aminophenylboronic acid, whereby the formation of three N --> B coordination bonds favored the oligomerization. The products have high melting points (>370 degrees C), are stable to moisture, and have good solubility in organic solvents; the latter property is useful for host-guest recognition experiments. The structural analysis by X-ray diffraction revealed that diverse conformations are possible because of the presence of two different units of aromatic rims. A cone-cone (double-cone) conformation is observed for three of these compounds, while the remaining one has a cone-partial cone conformation. An analysis of the molecular packing showed that the molecules are stacked in columns in two different orientations in relation to the organization of the macrocycles when referred to the N-B bonds. The inclusion properties toward primary amines and ammonium chlorides were analyzed by titration experiments and monitored by UV spectroscopy, whereby association constants on the order of 10(2)-10(3) M(-1) were determined.     

Influence of interparticle interactions on the kinetics of self-assembly and mechanical strength of nanoparticulate aggregates

Computer simulations based on Discrete Element Method have been performed in order to investigate the influence of interparticle interactions on the kinetics of self-assembly and the mechanical strength of nanoparticle aggregates.Three different systems have been considered.In the first system the interaction between particles has been simulated using the JKR (Johnson,Kendall and Roberts) contact theory,while in the second and third systems the interaction between particles has been simulated using van der Waals and electrostatic forces respectively.In order to compare the mechanical behaviour of the three systems,the magnitude of the maximum attractive force between particles has been kept the same in all cases.However,the relationship between force and separation distance differs from case to case and thus,the range of the interparticle force.The results clearly indicate that as the range of the interparticle force increases,the self-assembly process is faster and the work required to produce the mechanical failure of the assemblies increases by more than one order of magnitude.     

Novel phthalocyaninatobis(alkylcarboxylato)silicon(IV) compounds: NMR data and X-ray structures to study the spacing provided by long hydrocarbon tails that enhance their solubility

The reaction between trans-PcSiCl2 (1) and the potassium salts of six fatty acids (2 a-2 f) led to the trans-PcSi[OOC(CH2)nCH3]2 compounds (3 a-3 f), which were characterised by elemental analysis, IR, UV/Vis and 1H, 13C, and 29Si NMR spectroscopy. From a detailed study of the NMR spectra, the strong anisotropic currents of the Pc macrocycle were found to have an effect on up to the sixth methylenic group. As expected, the length of the hydrocarbon tail does not affect the chemical shift of the 29Si nucleus of any of the compounds, appearing at around -222.6. The structures of PcSi[OOC(CH2)nCH3]2, where n = 7, 10, 12, 13 and 20, were determined by X-ray crystallography. All the compounds were found to be triclinic with a P1 space group. In all cases the observed crystallographic pseudosymmetry is Ci and the asymmetric unit consists of half a molecule. The silicon atom is at the centre of a distorted octahedron and hence its coordination number is six. The carboxylate fragments are in a trans configuration with respect to the Pc macrocycle. The supramolecular structures are discussed in detail herein. The correlation between the 1H NMR chemical shifts and the position of the corresponding carbon atoms in the hydrocarbon tail reveals that the dicarboxylate substituents exhibit a spacer-like behaviour that enhances the solubility. A detailed study of the tail variable allowed us to evaluate the loss of radial shielding along the Pc2- ligand.     

Boron-nitrogen macrocycles: a new generation of calix[3]arenes

The simple condensation reaction of 3,5-di-tert-butyl salicylaldehyde and 3-aminophenylboronic acid leads to a trimeric macrocyclic compound. The ability of this molecule to include small organic molecules was in a first approximation analyzed by (1)H NMR spectroscopy and X-ray crystallography.     

Theoretical and experimental studies of the initiator influence on the anionic ring opening polymerization of propylene oxide

In this work, the influence of three different initiators (KOH, KOH dissolved in ethanol and the potassium salt of ethylene glycol) on the propylene oxide polymerization was studied by experimental and theoretical methods. A first series of reactions was carried out to establish the adequate thermal conditions for a minimal monomer transfer during the polymerization. The formation of end insaturations (main consequence of the monomer transfer interference) in the poly(propylene oxide) chains was studied by spectroscopic methods. Furthermore, a second series of poly(propylene oxide)s was prepared by using the mentioned initiators, and characterized by size exclusion chromatography. The initiator efficiency to create active centers in every reactive system was determined from the molecular weight and the conversion data obtained. Experimental results were elucidated by using quantum chemical calculations at density functional theory level, involving thermo-chemistry parameters, and the simulation of the infrared, and ¹³C nuclear magnetic resonance spectra. This method led to studying the addition of up to ten propylene oxide unit, resulting into important energetic tendencies and regioselectivity, being compared to the physicochemical data of products obtained. These correlations meant further understanding of the reaction course and the type of products obtained, depending on the nature of the initiator.     

Use of bis-aminoalcohol benzoquinones and dihydroxybenzoquinones in the formation of mono and polymeric structures of diorganotin(IV) derivatives

Reaction of three hexadentate ligands (L1-L3) derived from 1,4-benzoquinone bis(aminoalcohols) with diorganotin oxides (R₂Sn-O)_n (with R = Me, nBu, Ph) in 1:2 stoichiometric proportions lead to the formation of dinuclear tin compounds of the composition [(R₂Sn)₂(L)], wherein the five-coordinate metal centers are embedded in distorted trigonal-bipyramidal polyhedra. X-ray diffraction analysis revealed that diorganotin complexes carrying n-butyl groups tend to associate further through intermolecular O?Sn interactions to give 1D polymeric chains, while diphenyltin analogues tend to be monomeric. On the other hand, using 2,5-dihydroxy-3,6-dichloro-1,4-benzoquinone as ligand (L4) in 1:1 reactions with the diorganotin oxide derivatives, 1D polymeric complexes of the composition [R₂Sn(L4)(DMSO)]_n with seven-coordinate metal centers in distorted pentagonal-bipyramidal coordination polyhedra were obtained. In this case, the presence of different substituents attached to the tin atoms (Me, nBu, Ph) had no influence on the molecular composition of the products, but on the conformation of the polymeric chain, which was either planar (R = Me), slightly distorted from planarity (R = nBu) or ondulated (R = Ph).     

Effect of Asphaltenes and Resins on Asphaltene Aggregation Inhibition,Rheological Behaviour and Waterflood Oil-Recovery

This study presents an investigation about the influence of resins and asphaltenes, extracted from two Mexican crude oils (light and heavy oil samples), on the asphaltene aggregation inhibition, rheological behavior, and waterflood oil-recovery. Resins and asphaltenes were characterized by means of elemental analysis, metals analysis by atomic absorption, ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, and electrospray ionization mass spectrometry (ESI-MS) in order to evaluate the effect of their structural parameters on the phenomena studied. Efficiency of the resins fraction as natural inhibitors of asphaltene aggregation was evaluated trough ultraviolet–visible (UV–vis) spectroscopy. Results showed better efficiencies of resins on asphaltene aggregation inhibition at resin/asphaltene (R/A) ratios close to unity and at high temperature. In addition, efficiencies were influenced by structural characteristics of the asphaltene–resin system. Rheological behavior of the heavy crude oil sample was significantly influenced by the presence of asphaltenes and resins. Finally, asphaltenes and resins played an important role on wettability and waterflood oil-recovery.     

Performance of slotted pores in particle manufacture using rotating membrane emulsification

This paper addresses the use of different slotted pores in rotating membrane emulsification technology.Pores of square and rectangular shapes were studied to understand the effect of aspect ratio (1-3.5) and their orientation on oil droplet formation.Increasing the membrane rotation speed decreased the droplet size,and the oil droplets produced were more uniform using slotted pores as compared to circular geometry.At a given rotation speed,the droplet size was mainly determined by the pore size and the fluid velocity of oil through the pore (pore fluid velocity).The ratio of droplet diameter to the equivalent diameter of the slotted pore increased with the pore fluid velocity.At a given pore fluid velocity and rotation speed,pore orientation significantly influences the droplet formation rate: horizontally disposed pores (with their longer side perpendicular to the membrane axis) generate droplets at double the rate of vertically disposed pores.This work indicates practical benefits in the use of slotted membranes over conventional methods.