Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Resonant Raman scattering by strained and relaxed germanium quantum dots

This paper reports on the results of resonant Raman scattering investigations of the fundamental vibrations in Ge/Si structures with strained and relaxed germanium quantum dots. Self-assembled strained Ge/Si quantum dots are grown by molecular-beam epitaxy on Si(001) substrates. An ultrathin SiO₂ layer is grown prior to the deposition of a germanium layer with the aim of forming relaxed germanium quantum dots. The use of resonant Raman scattering (selective with respect to quantum dot size) made it possible to assign unambiguously the line observed in the vicinity of 300 cm^?1 to optical phonons confined in relaxed germanium quantum dots. The influence of confinement effects and mechanical stresses on the vibrational spectra of the structures with germanium quantum dots is analyzed.     

Growth of copper phthalocyanine on hydrogen passivated vicinal silicon(1 1 1) surfaces

Using ultra-high vacuum scanning tunneling microscopy (UHV-STM), we show that copper-phthalocyanine (CuPc) grows in a well ordered manner on hydrogen passivated vicinal silicon surfaces. CuPc grows one-dimensionally parallel to the monatomic steps on the vicinal silicon surface. Surprisingly, elongated clusters of the CuPc parallel to the step directions are formed even on the middle of the terraces well away from the step edges. The one-dimensional growth mode continues even after the full monolayer coverage on the substrate which results in strongly oriented growth mode of a thin film of CuPc on the vicinal silicon surfaces.     

Interaction of metals with an organic semiconductor: Ag and In on PTCDA

The interaction of Ag and In with a thin film of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) was studied by near-edge X-ray absorption fine structure (NEXAFS). Upon Ag deposition on a PTCDA film of 20 nm thickness the relative intensities and lineshapes, as well as the angular dependence of the spectra remains unchanged, illustrating the formation of a chemically unreactive Ag/PTCDA interface. On the other hand, the adsorption of 0.3 nm In strongly decreases the intensity of the π^* resonances in C and O K-edge NEXAFS spectra. This is attributed to a strong charge transfer between In and PTCDA, leading to a redistribution of the charge in the molecule. However, the absence of a strong shift or new features and negligible dependence of peak intensities corresponding to π^* resonances on the In thickness indicate that the interaction between In and PTCDA is not accompanied by a covalent bond formation.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Biochemisches Verhalten von Desoxyribonucleinsäure

Zusammenfassung Es wird eine durch DNS ausgel?ste biologische Wirkkette diskutiert. Durch DNS-Injektion lassen sich beim Warmblüter DNase-Aktivit?tserscheinungen hervorrufen. DNasen bewirken in niedrigen Konzentrationsbereichen 10⁻¹³-10⁻⁵ g/ml eine Steigerung der Zellzahl. In h?heren Konzentrationen wirken sie hemmend auf die Lebenst?tigkeit. Aufgrund dieser experimentellen Befunde ergibt sich ein selbstregelnder Mechanismus. Ausgeführt mit Mitteln der Deutschen Forschungsgemeinschaft.     

Zur Kenntnis der Reaktionen von Carbonsäurechloriden in Lösungsmitteln mit Wolle

Zusammenfassung Wolle und-Keratose wurden mit Carbonsäure-chloriden in Dimethylsulfoxid mit Pyridinzusatz oder ohne Base bei 20–60 °C bis zu 4 Stunden umgesetzt. Die dabei eintretende Vernetzungsreaktion beruht auf der Bildung von Formaldehyd aus den Säurechloriden und Dimethylsulfoxid. Damit werden auch die Anafysendaten verständlich: geringe Gewichtsänderungen, Beteiligung des Lysins, keine Beteiligung der Carboxylgruppen, Verschwinden des Tyrosins erst nach saurer Totalhydrolyse. Läßt man Acylchloride in Dimethylformamid, Dimethylacetamid, Hexamethyl-phosphorsäuretriamid,-Butyrolacton und Methyl-pyrrolidon auf Wolle einwirken, so erfolgt N,O-Acylierung unter Gewichtszunahme.

---

Summary Wool and -Keratose were reacted at 20–60° for 4 hours with acylchlorides in dimethylsulfoxide with addition of pyridine or without a base. The ensuing crosslinking reaction. was due to formation of formaldehyde by reaction of the acid chlorides with the solvent dimethylsulfoxide. This explains the analytical data found: small weight changes participation of lysine, no participation of the carboxylic groups, disappearance of tyrosine during the acid hydrolysis.If the acyl chlorides are reacted with wool in the solvents dimethylformamide, dimethylacetamide, hexamethyl-phosphortriamide,-butyrolacton and methyl-pyrrolidone, normal acylation and corresponding weight increases were found.

---

---

Teil der DissertationH.-D. Scharf, RWTH Aachen, 1972; 21. Mitteilung über ,Reaktivität von Aminosäureseitenketten. 20. Mitteilung vgl.W. Wellner, D. Nissen und H. Zahn, Colloid u. Polymer Sci.255, 444 (1977).

---

Jetzt Dynamit-Nobel AG., Troisdorf.

---

Jetzt Wella AG, Darmstadt.

---

Mit 4 Abbildungen und 8 Tabellen     

Infrared spectroscopic characterization of the buried interface and surfaces of bonded silicon wafers

Basic investigations have been carried out on the characterization of different processing steps in bond preparation using etched <111> faces of silicon wafers for the incidence of the infrared beam to a multiple internal reflection geometry. The method is very sensitive to the surface coverage and interface. Surface activation by RCA cleaning yields an increase of water coverage and a decrease of SiH and CH groups. The detection limit for an oxide layer between silicon wafers has been found to be about 3 nm. Received: 18 July 1997 / Revised: 15 August 1997 / Accepted: 19 August 1997