Direct measurements of HOx radicals in the marine boundary layer: testing the current tropospheric chemistry mechanism

OH and HO(2) radicals, atmospheric detergents, and the reservoir thereof, play central roles in tropospheric chemistry. In spite of their importance, we had no choice but to trust their concentrations predicted by modeling studies based on known chemical processes. However, recent direct measurements of these radicals have enabled us to test and revise our knowledge of the processes by comparing the predicted and observed values of the radical concentrations. We developed a laser-induced fluorescence (LIF) instrument and successfully observed OH and HO(2) at three remote islands of Japan (Oki Island, Okinawa Island, and Rishiri Island). At Okinawa Island, the observed daytime level of HO(2) agreed closely with the model estimates, suggesting that the photochemistry at Okinawa is well described by the current chemistry mechanism. At Rishiri Island, in contrast, the observed daytime level of HO(2) was consistently much lower than the calculated values. We proposed that iodine chemistry, usually not incorporated into the mechanism, is at least partly responsible for the discrepancy in the results. At night, HO(2) was detected at levels greater than 1 pptv at all three islands, suggesting the presence of processes in the dark that produce radicals. We showed that ozone reactions with unsaturated hydrocarbons, including monoterpenes, could significantly contribute to radical production.     

Kinetic Studies of Heterogeneous Reaction of HO2 Radical by Dicarboxylic Acid Particles

The HO₂ uptake coefficients (γ) for organic submicron aerosol particles were measured using an aerosol flow tube coupled with a chemical conversion/laser‐induced fluorescence technique under ambient conditions (760 Torr and 296 ± 2 K) and different values of relative humidity (RH) (28% and 68%). Determined uptake coefficients for succinic, glutaric, adipic, and pimelic acid aerosol particles at 28% RH were 0.07 ± 0.02, 0.07 ± 0.03, 0.02 ± 0.01, and 0.06 ± 0.03, respectively, whereas the γ values for those particles at 68% RH were 0.18 ± 0.07, 0.15 ± 0.04, 0.06 ± 0.01, and 0.13 ± 0.04, respectively. An increase in γ with increasing RH was observed for all the dicarboxylic acids, suggesting a contribution by water amount in the particle, aqueous phase chemistry, and uptake of HO₂–H₂O. The anomalously low γ values for adipic acid are likely related to its high crystallization RH and thus provide a new clue that the water amount and/or RH have a significant influence on HO₂ uptake.     

Partially bio‐based tri‐ and hexaallyl monomers: Synthesis from naturally occurring myo‐inositol and polyaddition with dithiols

myo‐Inositol, a naturally occurring cyclic hexaol, was converted to 2,4,6‐tri‐O‐allyl‐myo‐inositol and 1,2,3,4,5,6‐hexa‐O‐allyl‐myo‐inositol. Polyaddition of the former product, a tri(allyl ether) bearing three hydroxyl groups, with dithiols yielded the corresponding networked polymers. Their glass transition temperatures (T_gs) were higher than those of networked polymers formed by the polyaddition of 1,3,5‐tri‐O‐methyl‐2,4,6‐tri‐O‐allyl‐myo‐inositol. This implied the reinforcement of the networks by hydrogen bonding between the hydroxyl groups. Polyaddition of the latter product, a hexa(allyl ether), with dithiols yielded the corresponding networked polymers with much higher T_gs than those of all of the aforementioned networked polymers. This implied that efficient use of the hexafunctional monomer leads to the formation of more densely crosslinked polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1524–1529     

Palladium‐Catalyzed Direct Thiolation of Aryl CH Bonds with Disulfides

A catalytic variant of the direct thiolation of arenes, bearing directing groups, with disulfides or thiols has been developed under palladium and copper co‐catalysis. Both sulfenyl moieties of the disulfide could be incorporated into the thiolated products, therefore, the reactions reached completion with only half an equivalent of disulfide, with respect to the starting arene. Experimental evidence suggested that the reaction proceeds through a Pd^II/Pd^IV mechanism.     

Sensitized luminescence properties of dinuclear lanthanide macrocyclic complexes bearing a benzophenone antenna

Dinuclear lanthanide (Ln=Tb³⁺ or Eu³⁺) complexes (Ln₂L2) of two octadentate macrocyclic polyaminopolycarboxylic ligands connected through a benzophenone (BP) moiety (L2) have been synthesized. Sensitized luminescence properties of Ln₂L2 in water have been studied in comparison to those of BP-conjugated mononuclear Ln complexes (LnL1). The luminescence intensity of Tb₂L2 is lower than that of TbL1 because of lower triplet quantum yield of the BP moiety. In contrast, Eu₂L2 shows higher intensity than EuL1. For both Eu complexes, energy level of triplet excited-state BP (³BP*) is only 3 kJ mol⁻¹ higher than that of ⁵D₂ excited-state of Eu³⁺. The ⁵D₂ state formed by a triplet-energy transfer (TET) from ³BP* is therefore deactivated by a back energy transfer (BET) to the ground-state BP, resulting in low luminescence intensity of EuL1. In contrast, within Eu₂L2, TET from ³BP* to ⁵D₀ state of two Eu³⁺ ions is accelerated, thus leading to higher luminescence intensity. Another notable feature of Eu₂L2 is the luminescence quantum yield independent of its concentration. In contrast, for EuL1 system, an intermolecular BET occurs from ⁵D₂ state of Eu³⁺ to the ground-state BP conjugated to another EuL1 complex, resulting in a yield decrease with the concentration increase.     

Profiling and biomarker identification in plasma from different Zucker rat strains via high mass accuracy multistage mass spectrometric analysis using liquid chromatography/mass spectrometry with a quadrupole ion trap-time of flight mass spectrometer

High mass accuracy electrospray ionisation multistage tandem mass spectrometry (MS(n)) was applied to metabolite profiling studies on plasma samples derived from two strains of rat (the Zucker (fa/fa) obese strain and the normal wild type). Using a quadrupole ion trap time-of-flight (QIT-TOF) mass spectrometer, metabolite profiling software was applied to locate components of biological significance that could account for the differences between the two strains of rat and a formula prediction software tool was used to help identify individual components. The primary factor discriminating between the two populations was the concentration of endogenous lipids. In the Zucker (fa/fa) obese strain, the dominant ion signals and MS(n) spectra were in agreement with lysoglycerophosphocholine components such as palmitoyllysophosphatidylcholine, 1-oleoylglycerophosphocholine, 1-octadecyl-sn-glycero-3-phosphocholine and 1-stearoylglycerophosphocholine and these were found in relatively higher concentrations compared to the normal wild type. Components were identified using high mass accuracy MS(n) data, formula prediction software and by agreement with published mass spectra through internet databases, rather than using a conventional approach with authentic standards. This application shows that the use of high mass accuracy electrospray ionisation MS(n) together with a software tool can be used effectively to detect and characterise unknown analytes in complex matrices, and represents a promising approach for future profiling studies.     

Hybrid molecular material exhibiting single-molecule magnet behavior and molecular conductivity

Two unique materials based on Mn4 single-molecule magnet (SMM) clusters (ST=9) and integer or non-integer average valent platinum maleonitriledithiolate (mnt2-) complexes, [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}2][Pt(mnt)2]2.2MeCN (1) and [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}4][Pt(mnt)2]2 (2), were synthesized by the material diffusion method and electrochemical oxidation, respectively (hmp-=2-hydroxymethylpyridinate). 1 and 2 are comprised of four and six [Pt(mnt)2]n- units, respectively, in addition to a common MnII2MnIII2 double-cuboidal unit, [MnII2MnIII2(hmp)6(MeCN)2]4+ (hereinafter [Mn4]4+). Among the [Pt(mnt)2]n- units, two units in 1 and four units in 2 are coordinated with the [Mn4]4+ unit, forming a 1D chain of {-[Mn4]-[Pt(mnt)2]2-} for 1 and a discrete subunit of {[Pt(mnt)2]2-[Mn4]-[Pt(mnt)2]2} for 2. The other two [Pt(mnt)2]n- units, occupying void space of the packing, form a stacking column with the coordinating [Pt(mnt)2]n- units, finally constructing hybrid frames of aggregates consisting of [Mn4]4+ units and [Pt(mnt)2]n- units. Electronic conductivity measurements revealed that 1 is an insulator and 2 is a semiconductor with sigma=0.22 S.cm(-1) at room temperature and an activation energy of 136 meV. Detailed magnetic measurements proved that the [Mn4]4+ units in 1 and 2 behave as SMMs with an ST=9 ground state at low temperatures. There is no significant interaction between [Mn4]4+ units and [Pt(mnt)2]n- units, but interactions between localized spins of [Pt(mnt)2]n- were detected even in 2 at low temperatures where the conductivity is electronically insulated. 2 is the first example of a hybridized material exhibiting SMM behavior and electronic conductivity.     

Ruthenium-catalyzed [1,n]-metallotropic shift (n = 3, 5) of alkynyl carbene complex intermediates

The ruthenium-catalyzed isomerization of diynes and triynes involving propargyl carboxylate moieties affords dienynes and dienediynes, respectively. The [1,n]-metallotropic shift (n = 3, 5) (carbene walk) of in situ generated alkynyl carbene complexes has been proposed for the catalytic isomerization reaction.     

Photo‐Electrochemical C−H Bond Activation of Cyclohexane Using a WO3 Photoanode and Visible Light

The photo‐electrochemical C?H bond activation of cyclohexane to produce cyclohexanol and cyclohexanone (KA oil) with high partial oxidation selectivity (99 %) and high current utilization ratio (76 %) was achieved in air at room temperature at atmospheric pressure. The production rate of KA oil was accelerated by applying a bias. The incident photon to current efficiencies at 365 and 420 nm were 57 % and 24 %, respectively.     

Vanadium-containing mesoporous silica of high photocatalytic activity and stability even in water

Vanadium-containing mesoporous silica molecular sieve (V proportional HMS) with tetrahedrally coordinated V-oxide species (VVO4) has been prepared by a modified surfactant-templating method, consisting of an addition of surfactant to a mixture of water, alcohol, and Si and V precursors followed by calcination. The V proportional HMS demonstrates high photocatalytic activity even in the presence of water, while other V proportional HMS's prepared by conventional templating methods and V/HMS prepared by an impregnation method show almost no activity owing to hydrolysis of the VVO4 species. ESR and photoluminescence measurements reveal that the modified templating method creates VVO4 species confined within a silica layer, while other methods create VVO4 species exposed on silica surface. The former VVO4 species are highly stabilized by the confinement within the silica, thus suppressing the hydrolysis. Another notable property of the confined VVO4 species is the higher photocatalytic activity even without water, despite their confined structure. This is explained by higher electrophilicity and longer lifetime of the excited-state VVO4 species (VIVO4*) derived from their distorted structure. The obtained findings suggest potential use of the modified surfactant-templating method for synthesis of stable and recyclable V-containing mesoporous silica with high photocatalytic activity.