Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Cyclopolymerization of diallylamine derivatives in dimethyl sulfoxide

Diallyl quaternary ammonium chlorides, bromides and N-alkyldiallylamine hydrochlorides were polymerized with ammonium persulfate (APS) in dimethyl sulfoxide (DMSO). The dependences of yield and molecular weight of polymers on polymerization conditions were examined and quaternary ammonium chlorides were found to have better polymerizability than bromides. The poly(diallyl quaternary ammonium chlorides) obtained with APS—DMSO system are expected to have quite high molecular weights, as determined from the measurement of limiting viscosity numbers of the polymers in NaCl aqueous solution.     

Synthesis of some novel substituted quinolines as potent analgesic agents

Summary 2-Chloroquinoline-3-carbaldehyde and 2-chloro-4-methylquinoline-3-carbaldehyde have been prepared from acetanilide and acetoacetanilidevia a Vilsmeier-Haack reaction. Upon reaction with phenyl hydrazine, hydroxylamine, urea, and thiourea in presence of acetic acid, these chloroaldehydes afforded the title compounds which exhibit a several times higher analgesic activity than noramidopyrine (NAP).

---

Synthese einiger neuer substituierter Chinoline als stark analgetisch wirkende Substanzen

Zusammenfassung 2-Chlorchinolin-3-carbaldehyd und 2-Chlor-4-methylchinolin-3-carbaldehyd wurden, ausgehend von Acetanilid und Acetylacetanilid, über eineVilsmeier-Haack-Reaktion hergestellt. Reaktion dieser chlorsubstituierten Aldehyde mit Phenylhydrazin, Hydroxylamin, Harnstoff und Thioharnstoff ergab die Titelverbindungen, deren analgetische Aktivität jene von Noramidopyrin (NAP) um ein Mehrfaches übertrifft.

     

Kinetics of non-isothermal decomposition of acid maleato complexes of some bivalent metals

McGinn et al. [1] and Misra and Naik [2] studied the complexing capacity of maleic acid with metals. Edge [3] reported his findings on the pyrolysis of normal nickel maleato. This note is concerned with the estimation of kinetic parameters of the non-isothermal decomposition of acid maleato complexes of Co(II), Cu(II), Ni(II) and Cd(II).     

Minimization of erase-band in shingled PMR with asymmetric writer

To make the write-field much stronger with sharper cross-track field gradient in Shingled perpendicular Magnetic Recording (SMR), we have successfully developed asymmetric SMR heads with one-side shield design. Using these heads, higher track density capability on the shielded-side was demonstrated, which came from narrower erase-band width at shielded side.     

Molecular dynamics simulation of poly(3‐hexylthiophene) helical structure In Vacuo and in amorphous polymer surrounding

The stability of poly(3‐hexylthiophene) (P3HT) helical structure has been investigated in vacuo and in amorphous polymer surrounding via molecular dynamics‐based simulations at temperatures below and above the P3HT melting point. The results show that the helical chain remains stable at room temperature both in vacuo and in amorphous surrounding, and promptly loses its structure at elevated temperatures. However, the amorphous surrounding inhibits the destruction of the helix at higher temperatures. In addition, it is shown that the electrostatic interactions do not significantly affect the stability of the helical structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2448–2456     

Quantitative Relationships Between Molecular Descriptors,Chromatographic Retention Behavior,and In Vitro Antituberculosis Activity of Phytol Derivatives

JPC – Journal of Planar Chromatography – Modern TLC - The lipophilic character of phytol derivatives has been studied using reverse-phase planar chromatographic procedures....     

Hydrothermal conditions on Sn0.95Co0.05O2: nanostructures, ferromagnetism and optical behavior

We have studied the effect of hydrothermal conditions at constant temperature of 180 °C, varying preparation time for 15, 30 and 45 h on nanostructures of diluted magnetic semiconductor Sn_0.95Co_0.05O₂ (SC5). X-ray diffraction pattern confirm the tetragonal SnO₂ rutile phase. The transmission and scanning electron microscopy shows the resulting nanostructures i.e. nanospheres and nanorods. The proposed reaction mechanism is given. The Raman spectra show the formation of tetragonal rutile structure of SC5 nanostructures. Fourier transform infrared spectrum has been used to verify the existence of Sn–O bond. The photoluminescence spectra show that the emission spectral intensity increases gradually with decreasing grains size, increasing hydrothermal heating time of SC5 samples and exhibits an intense blue luminescence centered at a wavelength of 531 nm. The optical absorbance measurements revealed that the nanometric size of the materials influences the energy band gap. All the prepared SC5 samples exhibit room temperature ferromagnetism.     

The effects of activated carbon supports on the structure and properties of TiO2 nanoparticles prepared by a sol-gel method

TiO₂-coated activated carbon (TiO₂/AC) composites and pure TiO₂ powders were prepared by a sol-gel method using tetrabutylorthotitanate as a precursor. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), differential thermal analysis (DTA), X-ray photoelectron spectrum (XPS) and nitrogen absorption. The photoactivity of samples was evaluated by methylene blue (MB) degradation. The analysis results show that compared with pure TiO₂ powders, the spherical-shaped TiO₂ particles are well-dispersed in the AC matrix and the size of the resulting TiO₂ crystallites decreases to below 40 nm with increasing phase transformation temperature. The AC matrix creates anti-calcination effects and shows interfacial energy effects that control the growth of the TiO₂ particles, baffle the anatase to rutile phase transition, and cumber the TiO₂ particles to agglomerate. Compared with the surface areas of TiO₂ powders, the combination of TiO₂ and AC forms composites with high surface areas which are slightly affected by calcination temperature. By AC support, the photoactivity of TiO₂ is increased in MB photocatalytic course, possible because active carbon increases photocatalytic activity of TiO₂ particles by producing high concentration of organic compound near TiO₂, and small-size TiO₂ particles are well-dispersed on the surface of AC.