Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.     

Stereochemistry in cationic polymerization of alkenyl ethers. V. Stereochemistry of acetal additions as model reactions for the polymerization of alkenyl ethers

Acetal additions to β-substituted vinyl ethers having a variety of substituents (alkenyl ethers) were stereochemically investigated as model reactions for their cationic polymerization. The reactions catalyzed by BF₃O(C₂H₅)₂ in CH₂Cl₂ at O°C gave 1:1 adducts, the steric structure of which was determined by means of ¹³C-NMR spectroscopy. trans-Alkenyl ethers always gave adducts with a single structure stereospecifically, indicating that the intermediate carbocation attacks a trans-alkenyl ether from a definite direction independent of the bulkiness of substituents. On the other hand, cis-alkenyl ethers formed adducts with two steric structures, and the direction of cation addition was found to depend on the bulkiness of the alkoxy group involved. The above trends were in agreement with the results for poly(alkenyl ether)s and allowed detailed discussion of the stereochemistry of the propagation processes in alkenyl ether polymerizations.     

Direct and stepwise intercalation of alkylalcohols intoα-zirconium phosphate

Intercalation of alkylalcohols into -zirconium phosphate was investigated at 25°C and/or under reflux.n-Alcohols having two to five carbons and 2-propanol were taken up at 25°C. These alcohols, andn-hexanol and heptanol, also intercalated under reflux.n-Alcohols having eight to eighteen carbon atoms intercalated when a stepwise method was employed. 2-Butanol and tertiary amylalcohols intercalated under reflux using a butanol intercalate as a starting material. Ethanol-to-butanol intercalates were unstable at room temperature, losing alcohols and changing to -zirconium phosphate. The particle size of the -zirconium phosphate did not affect the intercalation of alcohols.     

Optically active 2-p-tolylsulfinylacrylate a novel chiral dienophile which exhibits high reactivity and diastereoselectivity

The Diels-Alder reaction of a novel chiral dienophile, alkyl ($\text{S}$)-2-$\text{p}$-tolylsulfinylacrylates 1 with anthracene and cyclopentadiene showed high diastereoselectivity under the chelation controlled condition.     

Diastereoselective imino-aldol condensation of chiral 3-(p-Tolylsulfinyl)-2-furaldimine and ester enolates

(Ss)-3-(p-Tolylsufinyl)-2-furaldimine was synthesized, and condensation of the chiral furaldimine with lithium ester enolates has been examined. The product distribution of the reaction is dependent upon reaction conditions and on the kind of the substituent placed on the esters. Disubstituted ester enolate resulted in the exclusive formation of (4R)-beta-lactam, while unsubstituted, tert-butyl ester enolate preferentially gave (3R)-beta-amino ester. With the monosubstituted ester enolates, the condensation afforded (4R)-beta-lactams and/or (3R)-beta-amino esters as major products. This method has been applied to an efficient route to chiral furyl beta-lactams.     

High-pressure synthesis of cyclic phenylacetylene oligomer

New conjugated oligomers were prepared by reacting phenylacetylene under high pressure of 0.11 to 0.92 GPa at 100–200°C for 0–5 h. The number-average molecular weight M?_n, the weight-average molecular weight M?_w, and the oligomer yield increased with pressure, tem-perature, and time. The average molecular weight of the oligomer showed the maximum value (M?_n: 830, M?_w: 2400) under 0.92 GPa, the maximum pressure, where phenylacetylene was oligomerized at a constant temperature. The structure of the oligomer was investigated from ESR, infrared, UV–VIS, field desorption mass (FDMS) spectra, and ¹³C NMR spec-trum. Analysis of the FDMS spectrum revealed that the molecular weight of the oligomer was multiple of the monomer. ¹³C NMR spectrum of the oligomer showed the absence of sp-carbon (? C?). We found that the oligomer had a cyclic structure. The cyclic oligomers of pentamer or more were new compounds. © 1995 John Wiley & Sons, Inc.     

Spectral analysis of Sr 3d XPS spectrum in Sr-containing hydroxyapatite

The Sr 3d X-ray photoelectron spectroscopy (XPS) spectrum of Sr-containing hydroxyapatite (SHAp) overlaps completely with the P 2p spectrum. Thus, the chemical state identification of Sr in SHAp is a challenging task. In this work, the Sr 3d spectrum was isolated from the overlapping spectra for analyzing the chemical state of Sr using a generic peak-fitting method. The SHAp layers containing various Sr concentrations were produced on a Ti substrate using a chemical treatment process with a calcium phosphate slurry that included Sr (NO₃)₂. The distribution of the constituent elements changed according to the Sr concentration, implying that the chemical state of Sr varied with concentration. The isolation of the Sr 3d XPS spectrum was conducted via spectral deconvolution using the P 2p spectrum corresponding to HAp. The isolated Sr 3d spectrum revealed that the chemical state of Sr was in SrO and Sr-substituted HAp states, and their ratio varied with the Sr concentration in the layer. The SrO to Sr-substituted HAp ratios affected the Sr ion releasing behavior from the SHAp layer, supporting the validity of the obtained analytical results.