Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

脂肪酸酯水解行为及与低聚果糖缔合行为的研究和应用

酯类化合物是酒类产品的主要香味成分,也是化妆品、饮料、食品中主要呈香物质,故对其水解行为的研究对揭示影响酯水解反应因素及提高和稳定上述产品质量,特别是解决酒类产品低度化过程中存在的质量下降问题具有重要的意义[1]。对酯水解反应的研究前人作了大量的工作:Bender与Ma     

线性分析法来解热脱附动力学参数

TPD方法是研究表面常规手段之一.对于如何从实验结果获得正确的脱附动力学参数,已有不少工作发表。然而,现有方法均存在一定的适用范围,尤其是重叠谱解叠,仍然没有很好地解决。本文介绍的线性分析法,不仅适用于简单的一级和二级脱附TPD谱的解析,而且也适用于重叠谱解叠,从而为实验上确定动力学级数和复杂谱解叠提供了依据。     

稀土对38CrMoAl钢软氮化层抗冲蚀磨损性能的影响

研究了稀土元素对38CrMoAl钢软氮化层抗冲蚀磨损性能的影响. 结果表明: 与软氮化相比, 稀土软氮化提高了38CrMoAl钢的抗冲蚀磨损性能, 同时提高了软氮化层的硬度以及钢的冲击韧度. 由于软氮化时稀土的渗入, 改善了渗层组织, 从而提高了38CrMoAl钢的抗冲蚀磨损性能和机械性能. 扫描电子显微镜对冲蚀磨损试样表面形貌的观察发现, 普通软氮化层的磨损特征为塑性变形形成的犁沟剥落, 并伴随着萌生横向裂纹, 有大块磨屑剥落; 而稀土软氮化层则为塑性变形形成的犁沟剥落.     

常压升温下油煤浆表观黏度变化的研究

为探讨煤直接液化工艺中油煤浆表观黏度随温度升高的变化规律，利用高温黏度计测定了煤浆体系的黏度，考察了溶剂、煤浆浓度、煤中含水量和不同显微组分等因素以及剪切速率、配浆温度、溶胀作用等对煤浆黏度 温度特性的影响。研究结果表明，低温下影响煤浆黏度变化的主要因素是溶剂本身的性质，煤浆的表观黏度随温度升高而降低；随温度继续升高在较宽温度范围内黏度变化不大，这是由溶剂性质以及煤在溶剂中的溶胀行为共同作用的结果；当温度达到约220℃后继续升高温度溶胀作用逐渐占优势，从而导致煤浆体系的表观黏度逐渐增大。     

Experimental study of photocatalytic oxidation of formaldehyde and its by-products

Formaldehyde is one of the most harmful pollutants that endanger occupants' health and the way of its effective removal has become a focus in the field of air quality. This paper studies the static photocatalytic removal of formaldehyde experimentally and finds out that carbon monoxide, which is more harmful to occupants' health than the formaldehyde itself, is one of the by-products in the process of photocatalytic oxidation of formaldehyde. The increase of carbon monoxide concentration should be taken into consideration in the photocatalytic application. The photocatalyst surface at room temperature can weakly adsorb CO and CO₂, which can deactivate the photocatalysts.     

套索冠醚毛细管色谱柱的研制

用套索冠醚N,N′-双(2-甲基吡啶)-二氮杂-18-冠-6作为固定相,涂渍在弹性石英毛细管内,测其柱效、惰性、热稳定性、平均极性及选择性等性质.其结构由元素分析、红外光谱、核磁共振及质谱分析的试验数据所证实.试验表明,它具有良好的色谱性能、中等极性,适用于对醇、卤代烃、芳香烃等各类异构体的分离,并用分子结构观点探讨了保留机理.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

关于Aa-Bb型缩聚物网络结构的研究——溶胶凝胶分配理论

溶胶凝胶分配理论是在分子水平上表征交联网络结构的有效工具。由Flory等建立和发展起来的这一理论,由于引用了溶胶相无分子内环化反应的假定,特别是在理论推导中将分子内交联反应与分子间的链增长反应对两相分配的贡献未能加以区别,致使理论与实验不符。本文充分考虑了经典理论的这些缺欠,建立了更为符合客观实际的理论模型。同时,用十分简便的方法推导了反应溶胶分数,溶胶反应程度,分子内和分子间总反应程度等量宏观联系的参数方程组。以聚酯为模型化合物的实验研究与本文所得理论结果基本相符。     

Preparation and evaluation of uniform-sized molecularly imprinted polymer beads used for the separation of sulfamethazine

Uniform-sized molecularly imprinted polymer (MIP) beads were prepared using a one-step swelling and polymerization method. The obtained sulfamethazine (SMZ)-imprinted polymer showed high affinity and selectivity toward SMZ and other structurally related sulfonamides in acetonitrile or water-acetonitrile mobile phases, particularly in high aqueous systems. The column performance of the MIPs for SMZ and its analogues could be improved by elevating the column temperature and optimizing the flow rate. The hydrogen-bonding effect plays a significant role in the recognition process of SMZ-imprinted polymer systems in organic media, while the ion-exchange effect, as well as hydrophobic effect, dominates the retention mechanism in aqueous-rich media, in addition to shape recognition.