Badge-type diffusive sampler using 3-methyl-2-benzothiazolinone hydrazone for measuring formaldehyde in indoor air.

The evaluation of a badge-type diffusive sampler for measuring formaldehyde using 3-methyl-2-benzothiazolinone hydrazone (MBTH) was investigated. On average, the formaldehyde concentration in blanks was reduced by approximately 31% by cleaning procedures. The cleaning techniques did not significantly differ in effectiveness. The maximum sampling rate was 22.4 +/- 3.5 mL min(-1) at MBTH concentrations of 0.05%. The formaldehyde concentration in blanks did not appreciably increase over a period of about 1 month at room temperature, and was 0.36 +/- 0.03 microg, with a relative standard deviation of 8%. The diffusive sampler had good precision and accuracy for measuring formaldehyde in indoor environments. For a 24-h exposure time, the limits of detection and quantification calculated with the field blanks were 9.7 and 13.8 ppb, respectively. The minimum exposure times were calculated based on the measured and calculated limits of quantification, the sampling rate, and the atmospheric formaldehyde concentration. The capacity of the diffusive sampler with 0.5% MBTH was 3 ppm h(-1), approximately 1.5-times the capacity when the MBTH concentrations were 0.05%.     

An integrated microfluidic device for influenza and other genetic analyses

An integrated microfluidic device capable of performing a variety of genetic assays has been developed as a step towards building systems for widespread dissemination. The device integrates fluidic and thermal components such as heaters, temperature sensors, and addressable valves to control two nanoliter reactors in series followed by an electrophoretic separation. This combination of components is suitable for a variety of genetic analyses. As an example, we have successfully identified sequence-specific hemagglutinin A subtype for the A/LA/1/87 strain of influenza virus. The device uses a compact design and mass production technologies, making it an attractive platform for a variety of widely disseminated applications.     

Characterization of amiodarone metabolites and impurities using liquid chromatography/atmospheric pressure chemical ionization mass spectrometry

Using the high performance liquid chromatography/atmospheric pressure chemical ionization tandem mass spectrometry (HPLC/APCI-MS/MS) technique, together with established trends from the literature, the structures of metabolites and impurities of amiodarone, an anti-arrhythmic drug, have been assigned. By comparing analyses of products of incubation with rat liver microsomes with controls in which glucose 6-phosphate dehydrogenase was omitted, metabolites could be distinguished from impurities. Structures for the two proposed metabolites and four impurities are proposed.     

6-Pyruvoyl tetrahydropterin synthase assay in extracts of cultured human cells using high-performance liquid chromatography with fluorescence detection of biopterin.

An assay for 6-pyruvoyl tetrahydropterin synthase, the second enzyme in the conversion of guanosine triphosphate into tetrahydrobiopterin, has been developed. Cell extracts were incubated with enzymatically prepared dihydroneopterin triphosphate (80 microM) in the presence of Mg2+ (12 mM), excess sepiapterin reductase (EC 1.1.1.153) (2 nmol/min) and NADPH (2 mM). 6-Pyruvoyl tetrahydropterin, the product of the reaction, was thus converted into tetrahydrobiopterin. After oxidation of the reduced biopterin derivatives in acidic iodine solution, biopterin was enriched and separated from the abundant neopterin phosphates by solid-phase extraction on a strong cation exchanger. Biopterin was then directly eluted on a reversed-phase liquid chromatographic column and detected fluorimetrically using excitation at 353 nm and emission at 438 nm. The biopterin concentrations formed by the coupled enzyme reaction increased linearly with incubation times up to 90 min. The assay allows the quantification of 6-pyruvoyl tetrahydropterin synthase in cultured human cells.     

On some contact problems for composite half-spaces PMM vol. 31, no. 6, 1967, pp. 1001–1008

Solutions are presented herein of some contact problems connected with the torsion of a composite half-space. In the general case the problem of the torsion of a composite elastic half-space is examined by means of the rotation of a stiff finite cylinder welded into a vertical recess of this half-space. Moreover, the following particular problems on the torsion of such a half-space are considered.

1. 1) A composite half-space with a vertical elastic infinite core, twisted by means of the rotation of a stiff stamp affixed to the upper endplate of the elastic core.

2. 2) A half-space with a vertical cylindrical infinite hole, twisted by means of the rotation of a stiff finite cylinder welded into the upper part of this hole.

In the general case the solution of the problem reduces to the solution of an integral equation of the second kind on a half-line. The question of the solvability of this fundamental integral equation is investigated, and it is shown that its solution may be constructed by successive approximations.

Let us note that the problem of the torsion of a homogeneous half space and of an elastic layer by means of rotation of a stiff stamp has been considered by Rostovtsev [1], Reissner and Sagoci [2], Ufliand [3], Florence [4], Grilitskii [5] and others.

The problem of the torsion of a circular cylindrical rod and the half-space welded to it which are subject to a torque applied to the free endface of the rod has been considered by Grilitskii and Kizyma[6].

The torsion of an elastic half-space with a vertical cylindrical inclusion of some other material by the rotation of a stiff stamp on the surface of this half-space has been considered in [7], wherein it has been assumed that the stamp is symmetrically disposed relative to the axis of the inclusion and lies simultaneously on both materials.     

Crystal Structures of Hydrochlorides of 2,3-Pentamethylene-3, 4-dihydroquinazolin-4-one

The crystal structures of hydrate (1) and anhydrate (2) forms of 2,3-pentamethylene-3,4-dihydroquinazolin-4-one hydrochloride have been determined by X-ray structure analysis. Crystal data of 1 are 2(C₁₃H₁₄N₂O)*3(HCl)*4.5 (H₂O), triclinic P?1, Z=2, a=8.004(5), b=13.129(7), c=15.725(7) Å, α=106.45(4), β=92.61(4), γ=97.98(5), R=0.0652 and 2 are C₁₃H₁₄N₂O*HCl, monoclinic C2/c, Z=8, a=21.360(4), b=5.954(1), c=21.263(4), β=117.89(3), R=0.0556. The crystal of the hydrate form 1is unstable. This form collapses easily with evaporation of H₂O and part of HCl molecules from crystals. By recrystallizing destroyed form has been obtained stable crystal form 2.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Fractionation of the human recombinant tissue plasminogen activator (rtPA) glycoforms by high-performance capillary zone electrophoresis and capillary isoelectric focusing.

This paper reports the fractionation of recombinant human tissue plasminogen activator (rtPA) glycoforms, a complex mixture to demonstrate the high resolving power of capillary zone electrophoresis (CZE) and capillary isoelectric focusing (cIEF). rtPA is a glycoprotein with a complex carbohydrate structure. The electropherograms and IEF patterns have been discussed in light of the known carbohydrate structures of rtPA. rtPA was treated with neuraminidase which removes the sialic acids from the carbohydrate chains. The desialylated rtPA was analyzed by both CZE and IEF and the results were compared to those of untreated rtPA. The usefulness of CZE and cIEF in the characterization of glycoproteins proteins is also discussed.     

Suzuki-Miyaura coupling reaction of aryl chlorides using di(2,6-dimethylmorpholino)phenylphosphine as ligand

Suzuki-Miyaura coupling was achieved on a variety of aryl chlorides by using di(2,6-dimethylmorpholino)phenylphosphine (L1) as a bulky electron-rich monoaryl phosphine ligand. We report the couplings of various chlorobenzenes and heteroaryl chlorides.