Polarization Sensitive Spectral Interferometric Optical Coherence Tomography for Biological Samples

A spectral interferometric optical coherence tomography (OCT) system which has polarization sensitivity is developed. This system reduces the mechanical scanning dimension by employing the principle of spectral interferometry, and measures a two dimensional cross-sectional image of biological tissue with one dimensional mechanical scanning. Sixteen OCT images with different polarization conditions are measured, and two dimensional distributions of each element of the Müller matrix of a sample to be measured are calculated.     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Preparation and physical properties of flame retardant acrylic resin containing nano-sized aluminum hydroxide

Poly(methylmethacrylate) (PMMA) shows high strength and transparency but is a flammable material. In this study, the surface of aluminum hydroxide was modified with methacrylate containing phosphoric acid moieties before dispersion in MMA, and organic-inorganic nano-hybrid materials were obtained by bulk polymerization in the presence of the surface-modified aluminum hydroxide. The resulting hybrid materials retained the high transparency of PMMA, with transparency values similar to that of pure PMMA. Moreover, the flame resistance of the hybrid materials was improved in comparison with that of pure PMMA, with depression of the horizontal burning rate becoming a maximum at an inorganic content of 3 wt%. These results suggest that the use of aluminum hydroxide surface-modified with phosphoric acid groups is an efficient method for obtaining good performance fire-resistant polymer materials.     

DESIGN AND PERFORMANCE OF THE OKAZAKI LARGE SPECTROGRAPH FOR PHOTOBIOLOGICAL RESEARCH

A computer-operated spectrograph was recently built at Okazaki, Japan. Different specimens can be placed on a horseshoe-shaped focal curve (10 m long) covering a wavelength range of 250 to 1000 nm so they can be irradiated simultaneously. The linear dispersion is about 0.8 nm/cm. The photon fluence rate on the focal curve is 5 x 10¹⁵. photons x cm^-2 x s^-1 at 300nm and 1 x 10¹⁶ photons x cm^-2 x s^-1 at 600 and at 900 nm. The spectral half width is 5.5 nm or less on the focal curve. The stray light content is about 10^-5 of the main peak at the peak wavelength ± 100 nm. Specimens are set in microcomputer-controlled threshold boxes so that wavelengths, photon fluence rates, photon fluences and timing of irradiations are controlled automatically according to a pre-programmed schedule. An optical fiber system is also provided for remote irradiations.     

Enteric solid dispersion of ciclosporin A (CiA) having potential to deliver CiA into lymphatics

Solid dispersions composed of three components, ciclosporin A (CiA), surfactant (HCO-60) and a pharmaceutical additive, were prepared. As an additive, cellulose acetate phthalate (CAP), methacrylic acid and methacrylic acid methylester copolymer (Eudragit L-100) and hydroxypropylmethylcellulose phthalate (HP-55), which are generally used as enteric coating materials, were employed. The dissolution behavior of CiA from these enteric solid-dispersion system was studied according to the paddle method of JP XI in comparison with that of Sandimmun, an olive oily CiA solution as a reference. Solid dispersion of CiA preparation did not dissolve in the 1st test fluid (pH 1.2) in 2 h. In the 2nd fluid (pH 6.8), about 80% of CiA was dissolved within 12 min, though the dissolution rate was dependent on both the quality and quantity of the additives. An in vivo systemic and lymphatic availability study was performed with rats whose carotid artery and thoracic lymph duct were cannulated. After intrastomach administration of each CiA preparation to rats at a dose of 7 mg/kg, blood and lymph samples were collected for 6 h. One of the HP-55 preparations gave the highest plasma CiA level, Cmax = 0.99 +/- 0.20 (S.E., n = 4) micrograms/ml, and also showed the highest lymphatic availability, the percentage of dose delivered to the lymphatics in 6 h was 1.98 +/- 0.10% and the maximum lymph CiA level was 76.8 +/- 12.86 micrograms/ml. Lymphatic availability of CiA from Sandimmun was 0.78 +/- 0.11% and the peak plasma CiA level was 0.46 +/- 0.10 microgram/ml.(ABSTRACT TRUNCATED AT 250 WORDS)     

Is recombinant human granulocyte colony-stimulating factor (G-CSF) orally available in rats?

Oral availability of recombinant human granulocyte colony-stimulating factor (G-CSF) was investigated in rats by measuring the blood total leucocyte (BTL) counts. Oral test G-CSF solution was prepared with 10% HCO-60 (polyoxyethylated, 60 mumol, castor oil derivative), 1% DK ester (sugar ester) or 10% MYS-40 (polyethyleneglycol monostearate), in which the G-CSF concentration was 500 or 250 micrograms/ml. Each test solution was injected into the duodenum of three rats at the G-CSF dose level of 300 or 600 micrograms/kg, and BTL counts were monitored for 48 h. All of the test G-CSF solution raised the BTL levels within 24 h after injection. In particular, the HCO-60 solution increased the BTL levels over 2 times as compared to the predose level at 600 micrograms/kg dose and the effect was apparently dose-dependent. A short-term study suggested that the effect of G-CSF on the BTL level appeared at the fastest at about 5 h after administration of HCO-60 test solution, 300 micrograms/kg. In view of the pattern of BTL dynamics obtained after i.v. injection of HCO-60 solution at 25 and 50 micrograms/kg, the increase of BTL levels observed after oral administration of the HCO-60 solution is considered to be due to the orally supplied G-CSF.