Design of a widely tunable laser with a chirped ladder filter

We theoretically investigated a digitally tunable laser with a chirped ladder filter and a ring resonator to obtain a wide wavelength tuning range covering the whole C- or L- band. The clear relation between the tuning range and laser structure, especially the ladder filter, is described analytically. The introduction of a chirped structure into a ladder filter is effective in achieving both wide tunability and a stable lasing mode. A numerical simulation based on multimode rate equations shows that a tuning range of over 40 nm and a mode suppression ratio over 40 dB can be achieved by introducing a chirped ladder filter.     

Polarization Sensitive Spectral Interferometric Optical Coherence Tomography for Biological Samples

A spectral interferometric optical coherence tomography (OCT) system which has polarization sensitivity is developed. This system reduces the mechanical scanning dimension by employing the principle of spectral interferometry, and measures a two dimensional cross-sectional image of biological tissue with one dimensional mechanical scanning. Sixteen OCT images with different polarization conditions are measured, and two dimensional distributions of each element of the Müller matrix of a sample to be measured are calculated.     

Imprinting by hot embossing in polymer substrates using a template of silica glass surface-structured by the ablation of LIBWE method

Laser-induced backside wet etching (LIBWE) of silica glass plates was performed to fabricate an imprinting template for hot embossing in polymer substrates such as polystyrene and silicone resin. Well-defined inverse surface-micropatterns of gratings and grid arrays on the substrates were produced by the hot embossing using a surface-structured silica glass as the template. These results indicate that the LIBWE method allows us to generate robust glass molding tools that exhibit the inverse shapes of the intended microstructures. PACS 52.38.Mf; 68.47.Mn; 81.05.Kf; 81.05.Lg; 83.50.Uv     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Drug-carrying latices for prolonged release of drugs

Dichlorophene was used as a model drug. Drug-carrying latex particles were prepared by soap-free emulsion copolymerization of dichlorophene acrylate with some hydrophilic methacrylate comonomers. The comonomers used affected not only the structure and colloidal stability of particles, but also the drug-activity of particles. Preliminary study of the drug activity revealed that highly hydrophilic latex particles were very stable and too inactive to be engulfed by amoebae and kill them. On the contrary, less hydrophilic particles carrying a large amount of drug can be an effective device to release drugs at a moderate rate to fight against extracelluar targets such as parasites.     

Thermodynamic Insight into the Origin of a Calix[n]arene-[60]fullerene Interaction and its Application to a Porphyrin-[60]fullerene Energy Transfer System

The calixarene-fullerene interaction,which causes only a slight change in the absorptionspectra, has been substantiated by calorimetricmeasurements: the H° values arecomparable with those obtained from the associationconstants estimated by a spectroscopic method. Furthermore, we determined the association constantbetween homooxacalix[3]arene and [60]fullerenederivatives with a porphyrin moiety by fluorescencespectra.     

Preparation and physical properties of flame retardant acrylic resin containing nano-sized aluminum hydroxide

Poly(methylmethacrylate) (PMMA) shows high strength and transparency but is a flammable material. In this study, the surface of aluminum hydroxide was modified with methacrylate containing phosphoric acid moieties before dispersion in MMA, and organic-inorganic nano-hybrid materials were obtained by bulk polymerization in the presence of the surface-modified aluminum hydroxide. The resulting hybrid materials retained the high transparency of PMMA, with transparency values similar to that of pure PMMA. Moreover, the flame resistance of the hybrid materials was improved in comparison with that of pure PMMA, with depression of the horizontal burning rate becoming a maximum at an inorganic content of 3 wt%. These results suggest that the use of aluminum hydroxide surface-modified with phosphoric acid groups is an efficient method for obtaining good performance fire-resistant polymer materials.     

Solid-state optical properties of a chiral supramolecular fluorophore consisting of chiral (1R,2R)-1,2-diphenylethylenediamine and fluorescent carboxylic acid derivatives

By using (1R,2R)-1,2-diphenylethylenediamine as a chiral molecule and 2-anthracenecarboxylic acid as a fluorescent molecule, we created a chiral supramolecular organic fluorophore having circularly polarized luminescence properties in the solid-state.     

DESIGN AND PERFORMANCE OF THE OKAZAKI LARGE SPECTROGRAPH FOR PHOTOBIOLOGICAL RESEARCH

A computer-operated spectrograph was recently built at Okazaki, Japan. Different specimens can be placed on a horseshoe-shaped focal curve (10 m long) covering a wavelength range of 250 to 1000 nm so they can be irradiated simultaneously. The linear dispersion is about 0.8 nm/cm. The photon fluence rate on the focal curve is 5 x 10¹⁵. photons x cm^-2 x s^-1 at 300nm and 1 x 10¹⁶ photons x cm^-2 x s^-1 at 600 and at 900 nm. The spectral half width is 5.5 nm or less on the focal curve. The stray light content is about 10^-5 of the main peak at the peak wavelength ± 100 nm. Specimens are set in microcomputer-controlled threshold boxes so that wavelengths, photon fluence rates, photon fluences and timing of irradiations are controlled automatically according to a pre-programmed schedule. An optical fiber system is also provided for remote irradiations.     

Interactions between temperature-sensitive hydrogel microspheres and granulocytes

Poly(N-isopropylacrylamide) (PNIPAM) has a low critical solution temperature (LCST) at 32°C in water and the hydrophilicity changes through the LCST. The microspheres whose surface was composed of PNIPAM exhibited phase transition behavior around 32°C. Therefore, the interactions between PNIPAM micropheres and granulocytes depended on the temperature. That is, the oxygen consumption and active oxygen production by cells in contact with PNIPAM-containing microspheres and adhesion of the microspheres to the cell surface were more enhanced above the LCST of PNIPAM than below it, whereas no significant temperature dependence of cell–microspheres interaction was observed in nonthermosensitive microsphere systems. It was suggested that the function of cells could be controlled with temperature using the temperature-sensitive microspheres.