Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

A characterization of certain irreducible symplectic 4-folds

 We give a characterization of irreducible symplectic fourfolds which are given as Hilbert scheme of points on a K3 surface. Received: 26 June 2002 / Revised version: 9 September 2002 Published online: 14 February 2003 Mathematics Subject Classification (2000): Primary 14J32, Secondary 32Q20     

Complete replacement of H2 by D2 via Pd/C-catalyzed H/D exchange reaction

[reaction: see text] A general and in situ D2 gas generation method using 10% Pd/C-catalyzed H2-D2 exchange reaction in a H2-D2O system has been developed. H2 gas sealed in a reaction flask was efficiently converted into nearly pure D2 gas, which can be used for the reductive deuteration of substrates possessing reducible functionalities within the molecule.     

Wiener's test for space-time random walks and its applications

This paper establishes a criterion for whether a -dimensional random walk on the integer lattice visits a space-time subset infinitely often or not. It is a precise analogue of Wiener's test for regularity of a boundary point with respect to the classical Dirichlet problem. The test obtained is applied to strengthen the harder half of Kolmogorov's test for the random walk.

     

Highly chemoselective hydrogenation with retention of the epoxide function using a heterogeneous Pd/C-ethylenediamine catalyst and THF

In general, palladium-carbon (Pd/C) catalyzed hydrogenation of epoxides affords the corresponding primary and secondary alcohols as a mixture. It has been found that the catalytic activity of a Pd/C -ethylenediamine complex catalyst [Pd/C(en)] in the hydrogenolysis of epoxide functions is drastically reduced. Herein we describe a mild and chemoselective method for the hydrogenation of olefin, nitro, and azide functions with retention of the epoxide function. The chemoselectivity was accomplished by using a combination of 5% Pd/C(en) and THF as solvent. A significant drop in the chemoselectivity of the hydrogenation is observed with 5% Pd/C(en) in MeOH. These results reinforce the utility of epoxides as important precursors of alcohols in synthetic chemistry.     

Pd/C-Et3N-mediated catalytic hydrodechlorination of aromatic chlorides under mild conditions

A mild and efficient one-pot procedure for the hydrodechlorination of aromatic chlorides using a Pd/C-Et₃N system was developed. A variety of aromatic chlorides could be dechlorinated at room temperature and under ambient hydrogen pressure. Et₃N activates the catalysis and is likely to work as a single electron donor in this system.     

Reductive and catalytic monoalkylation of primary amines using nitriles as an alkylating reagent

[reaction: see text] A selective and catalytic mono-N-alkylation method of both aromatic and aliphatic amines using nitriles as an alkylating agent with Pd/C or Rh/C as a catalyst is described. This method is particularly attractive to provide an environmentally benign and applicable alkylation method of amines without using toxic and corrosive alkylating agents such as alkyl halides and carbonyl compounds.     

Efficient partial hydrogenation of trichloromethyl to gem-dichloromethyl groups in platinum on carbon-catalyzed system

While gem-dichloromethyl groups can be directly synthesized by the mono-dechlorination of the corresponding trichloromethyl groups, the suppression control of the over-reduction to form chloromethyl or methyl functionalities is quite difficult. We have established the efficient and widely applicable mono-dechlorination method of the trichloromethyl groups to form the corresponding gem-dichloromethyl groups using platinum on carbon in dimethylacetamide as a specific solvent at 25 °C under a hydrogen atmosphere. The mono-dechlorination of the α,α,α-trichloromethylcarbonyl groups smoothly proceeded by the use of platinum on carbon as a catalyst in a highly chemoselective manner, while the efficient mono-dechlorination of the alkyl- and aryl-trichloromethyl groups required the combined use of Bu₃SnH.     

Rotation rate of a three-wing rotor illuminated by upward-directed focused beam in optical tweezers

The optical torque and the trapping position (focal point) in optical tweezers are analyzed for upward-directed focused laser illumination using a ray optics model, considering that laser light is incident at not only the lower surface but also the side surface of a 3-wing rotor. The viscous drag force due to the pressure and the shearing stress on all surfaces of the rotor is evaluated using computational fluid dynamics. The rotation rate is simulated in water by balancing the optical torque with the drag force, resulting in 500 rpm for an SU-8 rotor with 20 μm diameter at a laser power of 200 mW. The trapping position is estimated to be 7.6 μm in the rotor with an upward-directed laser at 200 mW via an objective lens having a numerical aperture of 1.4. Both the rotation rate and the trapping position agree well with the values obtained in the experiment.     

Hitting time of a half-line by two-dimensional random walk

We consider the probability that a two-dimensional random walk starting from the origin never returns to the half-line {(x₁,x₂)|x₁0,x₂=0} before time n. It is proved that for aperiodic random walk with mean zero and finite 2+(>2)-th absolute moment, this probability times n^1/4 converges to some positive constant c^* as . We show that c^* is expressed by using the characteristic function of the increment of the random walk. For the simple random walk, this expression gives Mathematics Subject Classification (2000):60G50, 60E10