Improvement of electrochemical performance for Li-rich spherical Li1.3[Ni0.35Mn0.65]O2+x modified by Al2O3

The Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x microspheres are firstly prepared and subsequently transferred into the Al₂O₃-coated Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x microspheres by a simple deposition method. The as-prepared samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and charge/discharge tests. The results reveal that the Al₂O₃-coated Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x sample has a typical α-NaFeO₂ layered structure with the existence of Li₂MnO₃-type integrated component, and the Al₂O₃ layer is uniformly coated on the surface of the spherical Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x particles with a thickness of about 4 nm. Importantly, the Al₂O₃-coated Li-rich sample exhibits obviously improved electrochemical performance compared with the pristine one, especially the 2 wt.% Al₂O₃-coated sample shows the best electrochemical properties, which delivers an initial discharge capacity of 228 mAh g^?1 at a rate of 0.1 C in the voltage of 2.0–4.6 V, and the first coulombic efficiency is up to 90 %. Furthermore, the 2 wt.% Al₂O₃-coated sample represents excellent cycling stability with capacity retention of 90.9 % at 0.33 C after 100 cycles, much higher than that of the pristine one (62.2 %). Particularly, herein, the typical inferior rate capability of Li-rich layered cathode is apparently improved, and the 2 wt.% Al₂O₃-coated sample also shows a high rate capability, which can deliver a capacity of 101 mAh g^?1 even at 10 C. Besides, the thin Al₂O₃ layer can reduce the charge transfer resistance and stabilize the surface structure of active material during cycling, which is responsible for the improvement of electrochemical performance of the Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x .     

Nearly monodispersed LiFePO<Subscript>4</Subscript>F nanospheres as cathode material for lithium ion batteries

Tavorite-structured lithium transition metal fluorophosphates have been considered as a good alternative to olivine-type cathode for lithium-ion batteries due to its exceptional ionic conductivity and excellent thermal stability. In this work, nearly monodisperse LiFePO₄F nanospheres with high purity are successfully synthesized by a solid-state route associated with chemically induced precipitation method for the first time. The synthesized LiFePO₄F presents nearly monodisperse nanospheres particles with average particle size of ~?500 nm. Cyclic voltammetry data exhibit a clear indication of the Fe³⁺/Fe²⁺ redox couple that involves a two-phase transition. Its electrochemical behaviors are examined by galvanostatic charge-discharge. The results show that the initial discharge capacity is 110.2 mAh g^?1 at 0.5 C, after 200 cycles is still retained 104.0 mAh g^?1 with the retention rate of 94.4%. The excellent cycle performance is mainly attributed to the uniform nanospheres-like morphology which is not only beneficial to shorten the transport distance of ions and electrons, but also improve the interface area between electrode and electrolyte, and thus improve the kinetics of Li ions.     

Excellent cycling stability of spherical spinel LiMn2O4 by Y2O3 coating for lithium-ion batteries

The Y₂O₃ nano-film is coated on the surface of the spherical spinel LiMn₂O₄ by precipitation method and subsequent heat treatment at 550 °C for 5 h in air. The structure and performance of the bare LiMn₂O₄ and Y₂O₃-coated LiMn₂O₄ are characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive analysis X-ray spectroscopy, galvanostatic charge–discharge, cyclic voltammetry, and impedance spectroscopy. It has been found that the addition of Y₂O₃ does not change the bulk structure of LiMn₂O₄, and the thickness of the Y₂O₃ coating layer is approximate to 3.0 nm. The 1 wt% Y₂O₃-coated LiMn₂O₄ electrode reveals excellent cycling performance with 80.3 % capacity retention after 500 cycles at 1 C at 25 °C. When cycling at elevated temperature 55 °C, the as-prepared sample still shows 76.7 % capacity retention after 500 cycles. These remarkable improvements indicate that thin Y₂O₃ coating on the surface of LiMn₂O₄ is an effective way to improve the electrochemistry performance. Besides, the suppression of Mn dissolution into the electrolyte via the Y₂O₃ coating layer can be accounted for the improved performances.     

Influence of preparation method on structure, morphology, and electrochemical performance of spherical Li[Ni0.5Mn0.3Co0.2]O2

Spherical Li[Ni_0.5Mn_0.3Co_0.2]O₂ was prepared by both the continuous hydroxide co-precipitation method and continuous carbonate co-precipitation method under different calcined temperatures. The physical properties and electrochemical behaviors of Li[Ni_0.5Mn_0.3Co_0.2]O₂ prepared by two methods were characterized by X-ray diffraction, scanning electron microscope, and electrochemical measurements. It has been found that different preparation methods will result in the differences in the morphology (shape, particle size, and tap density), structure stability, and the electrochemical characteristics (shape of initial charge/discharge curve, cycle stability, and rate capability) of the final product Li[Ni_0.5Mn_0.3Co_0.2]O₂. The physical and electrochemical properties of the spherical Li[Ni_0.5Mn_0.3Co_0.2]O₂ prepared by continuous hydroxide co-precipitation is apparently superior to the one prepared by continuous carbonate co-precipitation method. The optimal sample prepared by continuous hydroxide co-precipitation at 820 °C exhibits a hexagonally ordered layer structure, high special discharge capacity, good capacity retention, and excellent rate capability. It delivers high initial discharge capacity of 175.2 mAh g^?1 at 0.2 C rate between 3.0 and 4.3 V, and the capacity retention of 98.8 % can be maintained after 50 cycles. While the voltage range is broadened up to 2.5 and 4.6 V vs. Li⁺/Li, the special discharge capacities at 0.2 C, 0.5 C, 1 C, 2 C, 5 C, and 10 C rates are as high as 214.3, 205.0, 198.3, 183.3, 160.1 and 135.2 mAh g^?1, respectively.     

The effects of crystal structure of the precursor MnO2 on electrochemical properties of spinel LiMn2O4

Journal of Solid State Electrochemistry - The spinel LiMn2O4 samples for lithium-ion battery have been synthesized through one-step solid-state method using four different polymorphs of MnO2, e.g.,...     

Effects of complexants on [Ni1/3Co1/3Mn1/3]CO3 morphology and electrochemical performance of LiNi1/3Co1/3Mn1/3O2

LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials for the application of lithium ion batteries were synthesized by carbonate co-precipitation routine using different ammonium salt as a complexant. The structures and morphologies of the precursor [Ni_1/3Co_1/3Mn_1/3]CO₃ and LiNi_1/3Co_1/3Mn_1/3O₂ were investigated through X-ray diffraction, scanning electron microscope, and transmission electron microscopy. The electrochemical properties of LiNi_1/3Co_1/3Mn_1/3O₂ were examined using charge/discharge cycling and cyclic voltammogram tests. The results revealed that the microscopic structures, particle size distribution, and the morphology properties of the precursor and electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ were primarily dependent on the complexant. Among all as-prepared LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials, the sample prepared from Na₂CO₃–NH₄HCO₃ routine using NH₄HCO₃ as the complexant showed the smallest irreversible capacity of 19.5 mAh g⁻¹ and highest discharge capacity of 178.4 mAh g⁻¹ at the first cycle as well as stable cycling performance (98.7% of the initial capacity was retained after 50 cycles) at 0.1 C (20 mA g⁻¹) in the voltage range of 2.5–4.4 V vs. Li⁺/Li. Moreover, it delivered high discharge capacity of over 135 mAh g⁻¹ at 5 C (1,000 mA g⁻¹).     

Continuous spatial public goods game with self and peer punishment based on particle swarm optimization

How cooperative behavior emerges and evolves in human society remains a puzzle. It has been observed that the sense of guilt rooted from free-riding and the sense of justice for punishing the free-riders are prevalent in the real world. Inspired by this observation, two punishment mechanisms have been introduced in the spatial public goods game which are called self-punishment and peer punishment respectively in this paper. In each situation, we have introduced a corresponding parameter to describe the level of individual tolerance or social tolerance. For each individual, whether to punish others or whether it will be punished by others depends on the corresponding tolerance parameter. We focus on the effects of the two kinds of tolerance parameters on the cooperation of the population. The particle swarm optimization (PSO)-based learning rule is used to describe the strategy updating process of individuals. We consider both of the memory and the imitation in our model. Via simulation experiments, we find that both of the two punishment mechanisms could facilitate the promotion of cooperation to a large extent. For the self-punishment and for most parameters in the peer punishment, the smaller the tolerance parameter, the more conducive it is to promote cooperation. These results can help us to better understand the prevailing phenomenon of cooperation in the real world.     

Influence of Li source on tap density and high rate cycling performance of spherical Li[Ni<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>]O<Subscript>2</Subscript> for advanced lithium-ion batteries

Spherical Li[Ni_1/3Co_1/3Mn_1/3]O₂ cathode materials with different microstructure have been prepared by a continuous carbonate co-precipitation method using LiOH⋅H₂O, Li₂CO₃, CH₃COOLi⋅2H₂O and LiNO₃ as lithium source. The effects of Li source on the physical and electrochemical properties of Li[Ni_1/3Co_1/3Mn_1/3]O₂ are investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical measurements. The results show that the morphology, tap density and high rate cycling performance of Li[Ni_1/3Co_1/3Mn_1/3]O₂ spherical particles are strongly affected by Li source. Among the four Li sources used in this study, LiOH⋅H₂O is beneficial to enhance the tap density of Li[Ni_1/3Co_1/3Mn_1/3]O₂, and the tap density of as-prepared sample reaches 2.32 g cm⁻³. Meanwhile, Li₂CO₃ is preferable when preparing the Li[Ni_1/3Co_1/3Mn_1/3]O₂ with high rate cycling performance, upon extended cycling at 1 and 5C rates, 97.5% and 92% of the initial discharge capacity can be maintained after 100 cycles.