High Voltage Pulse Power and the Technics for the Capacitor Power-Storage Type

Lower hybrid wave （LHW）, electro cyclotron （EC） and neutral beam injection （NBI） etc. are the important methods of auxiliary heating. They would be devoted to the HL-2A tokamak step by step. In order to satisfy the debug of each system and the need of the experiment, the system should be equipped with high voltage pulse power （HVPP） according to the requirement.     

GS-221高速摄影测量仪测角信息的采集与处理

在GS-221高速摄影测量仪中,测角信息采集与处理速度的快慢是重要性能指标之一。本文讨论了如何在尽可能短的时间内对测角信息进行采集和处理的软件实现方法。     

LC Determination of 4-Bromoaniline in Green Algae Chlamydomonas reinhardtii After Continuous-Flow Microextraction

In this study, the determination of 4-Bromoaniline (4-BA) in green algae Chlamydomonas reinhardtii (C. reinhardtii) was investigated by applying continuous-flow microextraction (CFME) combined with high-performance liquid chromatography (HPLC). Continuous-flow microextraction was conducted in a homemade glass chamber, i.e. the sample solution flowed through a constant volume drop of solvent in the chamber at a constant flow rate. The effects of different factors on extraction efficiencies were also investigated and these factors included the kind of extraction solvent, solvent drop volume, sample flow rate, extraction time and addition amount of salt. Under the optimum extraction conditions (extraction solvent, carbon tetrachloride; solvent drop volume, 3.5 μL; sample flow rate, 1.0 mL min⁻¹; extraction time, 10 min; no addition of salt), the calibration plot was set up by plotting peak area against a series of 4-Bromoaniline concentrations (0.01–10 μg mL⁻¹) in aqueous solution. The correlation coefficient (r) was 0.9990. The limit of detection (LOD) was 0.6 ng mL⁻¹. The precision of this method was obtained by successive five time analyses of 100-ng mL⁻¹ standard solution of 4-Bromoaniline, and the relative standard deviation (RSD) was 3.5%. The concentration factor was calculated by the ratio of peak area of the analyte obtained after and before extraction and found to be 10.6. 4-Bromoaniline residues in Chlamydomonas. reinhardtii cells and tap water samples were satisfactorily analyzed according to the method described above.     

Some novel layered-silicate nanocomposites based on a biodegradable hydroxybutyrate copolymer

This paper describes the preparation, characterization, mechanical properties and thermal stability of layered silicate nanocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHB-co-PHH, known as Nodax^TM). The dispersed phases were organically modified montmorillonites (clay 20A and clay 25A), mica, and talc, and they were introduced by solution mixing. Wide-angle X-ray scattering results and transmission electron microscopy (TEM) images confirmed that these two clays were intercalated and finely distributed in the Nodax^TM matrix. This type of layered filler led to remarkable improvements in mechanical properties even at very low loadings. Minimizing aggregation was more of a problem in the case of the mica and the talc, at least in this particular matrix. In some cases, these layered fillers slightly decreased the thermal stability of the Nodax^TM.     

Conserved Control Path in Multilayer Networks

The determination of directed control paths in complex networks is important because control paths indicate the structure of the propagation of control signals through edges. A challenging problem is to identify them in complex networked systems characterized by different types of interactions that form multilayer networks. In this study, we describe a graph pattern called the conserved control path, which allows us to model a common control structure among different types of relations. We present a practical conserved control path detection method (CoPath), which is based on a maximum-weighted matching, to determine the paths that play the most consistent roles in controlling signal transmission in multilayer networks. As a pragmatic application, we demonstrate that the control paths detected in a multilayered pan-cancer network are statistically more consistent. Additionally, they lead to the effective identification of drug targets, thereby demonstrating their power in predicting key pathways that influence multiple cancers.     

Enhanced Sensitive Electrochemical Sensor for Simultaneous Catechol and Hydroquinone Detection by Using Ultrasmall Ternary Pt-based Nanomaterial

The simple and effective method for the novel synthesis of Pt-based nanoparticle was presented with high efficiency. The sensitive catalyst for the simultaneous detection of catechol and hydroquinone was prepared by depositing ternary metal complex on fluorine-doped tin-oxide (FTO). The composition and morphology of nanomaterials were characterized by TEM, HRTEM, XRD, XPS, and EDS (energy dispersive spectroscopy). The size of the Pt-based nanomaterial was about 5±1 nm. The electrochemical performance of the modified catalyst was studied by CV, DPV, and EIS. The modified PtNiCu@FTO catalyst possessed good electro-oxidation activity for hydroquinone and catechol and used for simultaneous detection of catechol and hydroquinone at scan rate of 20 mV s⁻¹ (vs. Ag/AgCl). Detection responses were found in the ranges of 5–2900 μM for hydroquinone and 5–3000 μM for catechol. The detection limits (LOD) for HQ and CC were observed as 0.35 and 0.29 μM, respectively. The sensitivity of HQ and CC were 1515.55 and 1485 μA mM⁻¹ cm⁻², respectively. The prepared nanomaterial were effectively applied for the determination of CC and HQ in real samples.     

Elementary Photoelectronic Processes at a Porphyrin Dye/Single‐Walled TiO2 Nanotube Hetero‐interface in Dye‐Sensitized Solar Cells: A First‐Principles Study

A unique one‐dimensional (1D) sandwich single‐walled TiO₂ nanotube (STNT) is proposed as a photoanode nanomaterial with perfect morphology and large specific surface area. We have thoroughly examined the elementary photoelectronic processes occurring at the porphyrin dye/STNT hetero‐interface in dye‐sensitized solar cells (DSSCs) by theoretical simulation. It is desirable to investigate the interfacial photoelectronic processes to elucidate the electron transfer and transport mechanism in 1D STNT‐based DSSCs. We have found that the photoexcitation and interfacial charge separation mechanism can be described as follows. A ground‐state electron of the dye molecule (localized around the electron donor) is first promoted to the excited state (distributed electron donor), and then undergoes ultrafast injection into the conduction band of the STNT, leaving a hole around the oxidized dye. Significantly, the injected electron in the conduction band is transported along the STNT by means of Ti 3d orbitals, offering a unidirectional electron pathway toward the electrode for massive collection without the observation of trap states. Our study not only provides theoretical guidelines for the modification of TiO₂ nanotubes as a photoanode material, but also opens a new perspective for the development of a novel class of TiO₂ nanotubes with high power‐generation efficiency.     

基于摩擦磨损的KDP晶体固结磨料抛光垫优化

本文通过固结磨料球与KDP晶体对磨的单因素试验探究固结磨料球中反应物种类、磨粒浓度、反应物浓度、基体硬度对摩擦系数、磨痕截面积和磨痕处粗糙度的影响,试验结果表明:KHCO₃固结磨料球对磨后磨痕对称性好,磨痕处的粗糙度值低;磨痕截面积随磨粒和反应物浓度的增加而增大,随基体硬度的增大而降低;磨痕处粗糙度随磨粒和反应物浓度的增加先降低后上升,随基体硬度的增大先上升后降低;摩擦系数受磨粒和反应物浓度影响不明显,随基体硬度的增大而降低。选择KHCO₃作为反应物,Ⅰ基体,磨粒浓度为基体质量的100%,反应物浓度为15%制备固结磨料球与KDP晶体对磨后的磨痕轮廓对称度好且磨痕处粗糙度值低,以该组分制备固结磨料垫干式抛光KDP晶体,可实现晶体表面粗糙度Sa值为18.50 nm,材料去除率为130 nm/min的高效精密加工。     

几种核苷的毛细管胶束电动色谱分离

在胶束电动色谱模式下,考察了影响核苷分离的缓冲溶液、SDS浓度、pH、表面活性剂、有机添加剂、分离温度及外加电压等重要因素,并优化了关键的分离条件,建立了一种简单快速的利用毛细管胶束电动色谱DAD检测器分离分析核苷的新方法。当缓冲溶液为36 mmol/L硼酸缓冲液(pH 9.0)、30 mmol/L SDS和3%(V/V)乙腈,分离电压为25 kV和分离温度为25℃时,5种核苷在6 m in内实现了令人满意的基线分离。在优化的条件下,对其线性范围、检出限和重现性进行了测定。结果表明,核苷的迁移时间的重现性<1%;面积的重现性<3%。所建立的分离方法的线性范围宽,检出限低,重现性好。