Polymerised bicontinuous microemulsions as stationary phases for capillary electrochromatography

Summary Polymerisation of bicontinuous microemulsions yields porous monolithic structures with well defined pore sizes that are potentially suitable for use as stationary phases for capillary electrochromatography (CEC). A variety of pore sizes can be achieved by altering the composition of the microemulsion, which typically consists of butyl methacrylate (BMA) and ethylene glycol dimethacrylate (EGDMA) as the polymerisable oil phase. The aqueous phase consists of water, a surfactant (sodium dodecyl sulphate, SDS) and a co-surfactant (1-propanol). 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) is also added to provide charges along the polymer backbone to allow electroosmotic flow (EOF) to occur. SEM analysis shows that in-situ polymerisation yields a monolithic structure with a porous topography. Investigations have shown that these monoliths are easy to prepare, robust and suitable for the separation of phthalates. They generate higher linear velocities than are achieved using the silica based HPLC packings normally used for CEC.     

The C-H bond dissociation energy of furan: photoelectron spectroscopy of the furanide anion

Using photoelectron spectroscopy, we interrogate the cyclic furanide anion (C(4)H(3)O(-)) to determine the electron affinity and vibrational structure of the neutral furanyl radical and the term energy of its first excited electronic state. We present the 364-nm photoelectron spectrum of the furanide anion and measure the electron affinity of the X?(2)A(') ground state of the α-furanyl radical to be 1.853(4) eV. A Franck-Condon analysis of the well-resolved spectrum allows determination of the harmonic frequencies of three of the most active vibrational modes upon X?(2)A(') ← X?(1)A(') photodetachment: 855(25), 1064(25), and 1307(40) cm(-1). These modes are ring deformation vibrations, consistent with the intuitive picture of furanide anion photodetachment, where the excess electron is strongly localized on the α-carbon atom. In addition, the A?(2)A(') excited state of the α-furanyl radical is observed 0.68(7) eV higher in energy than the X?(2)A(') ground state. Through a thermochemical cycle involving the known gas-phase acidity of furan, the electron affinity of the furanyl radical yields the first experimental determination of the C-H(α) bond dissociation energy of furan (DH(298)(C(4)H(3)O-H(α))): 119.8(2) kcal mol(-1).     

Aggregation of [Au(CN)4]- anions: examination by crystallography and 15N CP-MAS NMR and the structural factors influencing intermolecular Au···N interactions

To investigate the factors influencing the formation of intermolecular Au···NC interactions between [Au(CN)(4)](-) units, a series of [cation](n+)[Au(CN)(4)](n) double salts was synthesized, structurally characterized and probed by IR and (15)N{(1)H} CP-MAS NMR spectroscopy. Thus, [(n)Bu(4)N][Au(CN)(4)], [AsPh(4)][Au(CN)(4)], [N(PPh(3))(2)][Au(CN)(4)], [Co(1,10-phenanthroline)(3)][Au(CN)(4)](2), and [Mn(2,2';6',2'-terpyridine)(2)][Au(CN)(4)](2) show [Au(CN)(4)](-) anions that are well-separated from one another; no Au-Au or Au···NC interactions are present. trans-[Co(1,2-diaminoethane)(2)Cl(2)][Au(CN)(4)] forms a supramolecular structure, where trans-[Co(en)(2)Cl(2)](+) and [Au(CN)(4)](-) ions are found in separate layers connected by Au-CN···H-N hydrogen-bonding; weak Au···NC coordinate bonds complete octahedral Au(III) centers, and support a 2-D (4,4) network motif of [Au(CN)(4)](-)-units. A similar structure-type is formed by [Co(NH(3))(6)][Au(CN)(4)](3)·(H(2)O)(4). In [Ni(1,2-diaminoethane)(3)][Au(CN)(4)](2), intermolecular Au···NC interactions facilitate formation of 1-D chains of [Au(CN)(4)](-) anions in the supramolecular structure, which are separated from one another by [Ni(en)(3)](2+) cations. In [1,4-diazabicyclo[2.2.2]octane-H][Au(CN)(4)], the monoprotonated amine cation forms a hydrogen-bond to the [Au(CN)(4)](-) unit on one side, while coordinating to the axial sites of the gold(III) center through the unprotonated amine on the other, thereby generating a 2-D (4,4) net of cations and anions; an additional, uncoordinated [Au(CN)(4)](-)-unit lies in the central space of each grid. This body of structural data indicates that cations with hydrogen-bonding groups can induce intermolecular Au···NC interactions, while the cationic charge, shape, size, and aromaticity have little effect. While the ν(CN) values are poor indicators of the presence or absence of N-cyano bridging between [Au(CN)(4)](-)-units (partly because of the very low intensity of the observed bands), (15)N{(1)H} CP-MAS NMR reveals well-defined, ordered cyanide groups in the six diamagnetic compounds with chemical shifts between 250 and 275 ppm; the resonances between 260 and 275 ppm can be assigned to C-bound terminal ligands, while those subject to CN···H-N bonding resonate lower, around 250-257 ppm. The (15)N chemical shift also correlates with the intermolecular Au···N distances: the shortest Au-N distances also shift the (15)N peak to lower frequency. This provides a real, spectroscopically measurable electronic effect associated with the crystallographic observation of intermolecular Au···NC interactions, thereby lending support for their viability.     

A dual strategy for solving the linear programming relaxation of a driver scheduling system

A Mathematical Programming model of a driver scheduling system is described. This consists of set covering and partitioning constraints, possibly user-supplied side constraints, and two pre-emptively ordered objectives. The previous solution strategy addressed the two objectives using separate Primal Simplex optimisations; a new strategy uses a single weighted objective function and a Dual Simplex algorithm initiated by a specially developed heuristic. Computational results are reported.     

Computer Scheduling of Vehicles from One or More Depots to a Number of Delivery Points

The problem of scheduling delivery vehicles from a number of depots to customers, subject to constraints on load and distance or time, is considered. A new algorithm is presented; this allows routes from several depots to be constructed simultaneously, subject to restrictions on numbers of vehicles at individual depots. Where too many customers require service, a flexible priority rule will select those to be served. Results for the single depot case are compared with other known algorithms; further results are given and discussed for cases of several depots.     

Simulation of flow problems with moving mechanical components,fluid–structure interactions and two-fluid interfaces

The application of a stabilized space–time finite element formulation to problems involving fluid–structure interactions and two-fluid interfaces is discussed. Two sample problems are presented and the method is validated by comparison with a test problem. © 1997 John Wiley & Sons, Ltd.     

Separation and identification of the Z and E isomers of 2-(3-pentenyl)pyridine by capillary electrophoresis and nuclear magnetic resonance spectroscopy

A mixture of the Z and E isomers of 2-(3-pentenyl)pyridine has been separated with baseline resolution by capillary electrophoresis. Using molecular modelling it was proposed that the smaller more rapidly migrating peak would be the Z isomer. This agreed with a 38:62 (Z/E) composition by nuclear magnetic resonance spectroscopy. The sample was also investigated by gas chromatography coupled to mass spectrometry.     

Affecting the phase split at a large diameter T-junction by using baffles

Current research has expanded on the existing database by conducting air–water experiments in a 0.125 m regular T-junction and a 0.125/0.076 m reduced T-junction. Inserts, cut to 30° and 45°, protruded from the side arm into the main pipe of the junction at different protrusion depths and their effect on the two-phase flow phase split at the junction measured. Depending on the approaching flow regime, inserts placed at the junction were seen to either enhance the partial phase separation occurring at the T-junction or promote a more equal flow split between the two downstream arms.     

Influence of the unpacked section on the chromatographic performance of duplex strong anion-exchange columns in capillary electrochromatography

This work describes initial investigations of strong anion-exchange (SAX) packing materials for capillary electrochromatography (CEC). The use of SAX phases in CEC is theoretically appealing for the analysis of negatively charged species. The reversed direction of the electroosmotic flow (EOF) generated by SAX phases (in comparison to reversed phases and strong cation-exchange phases) means that negative species can migrate with the EOF, not against it, hence the analysis times, of such species should be decreased and efficiencies improved. Duplex CEC columns (the standard for instruments using UV detection) consist of a packed and an unpacked section. Using common reversed-phase packing materials the direction of the EOF in both sections is co-linear, however when normal fused-silica capillaries are packed with SAX material the direction of the EOF in the two sections oppose one another. It has been shown, using conventional duplex CEC columns and fully packed CEC-MS columns that the opposing direction of EOF causes a massive degradation in column performance. Consequentially, it is demonstrated that if the EOF in the open section of the duplex SAX column can be controlled via pH or capillary derivatisation then good, reproducible CEC can be performed on anionic species using SAX packed CEC columns.