Polymer melting and polymer powder sintering by thermal analysis

Sintering of polymeric powders is a peculiar characteristic of many processing technologies, including rotational moulding and selective laser sintering (SLS). During polymer sintering, viscosity reduction in the melt state promotes densification of polymer powders, through a double stage mechanism, involving powder coalescence and bubble removal. In particular, sintering of semi-crystalline polymers is strongly influenced by the melting behaviour. Nevertheless, melting itself in absence of pressure is not necessarily accompanied by powder sintering, unless low viscosities are achieved. In this work, the melting and sintering behaviour of recycled high density polyethylene (rHDPE) have been analysed through differential scanning calorimetry (DSC) and Thermomechanical Analysis (TMA). Efficient models capable of describing the melting temperature distribution and rate of sintering of rHDPE powders have been developed, highlighting the inherent differences between the two distinct processes. This revised version was published online in July 2006 with corrections to the Cover Date.     

An embedding theorem in Lorentz-Zygmund spaces

We study Sobolev embedding theorems in Lorentz-Zygmund spaces. Some limiting cases are considered.Supported by M.U.R.S.T. (1990).     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Hilbert functions and Betti numbers in a flat family

Summary This paper is dedicated to the study of Hilbert functions and Betti numbers of the projective varieties in a flat family. We prove that the Hilbert function H(X _y ,n),y Y-a parameter scheme-is lower semicontinuous for any fixed n. In case Y is integral and noetherian we obtain the well-known fact that the set V Y where H(X _y ,n)is maximal for all n's is open and nonempty. We show also that b_i(X _y )-the i- th Betti number of X_y—is upper semicontinuous for y V. The paper contains also a number of results concerning the relations among the various Betti numbers.Member of G.N.S.A.G.A.-C.N.R. Supported in part by M.P.I. (Italian Minstry of Education).     

Nonpeptide inhibitors of cathepsin G: optimization of a novel beta-ketophosphonic acid lead by structure-based drug design

The serine protease cathepsin G (EC 3.4.21.20; Cat G), which is stored in the azurophilic granules of neutrophils (polymorphonuclear leukocytes) and released on degranulation, has been implicated in various pathological conditions associated with inflammation. By employing high-throughput screening, we identified beta-ketophosphonic acid 1 as a moderate inhibitor of Cat G (IC(50) = 4.1 microM). We were fortunate to obtain a cocrystal of 1 with Cat G and solve its structure by X-ray crystallography (3.5 A). Structural details from the X-ray analysis of 1.Cat G served as a platform for optimization of this lead compound by structure-based drug design. With the aid of molecular modeling, substituents were attached to the 3-position of the 2-naphthyl ring of 1, which occupies the S1 pocket of Cat G, to provide an extension into the hydrophobic S3 region. Thus, we arrived at analogue 7 with an 80-fold potency improvement over 1 (IC(50) = 53 nM). From these results, it is evident that the beta-ketophosphonic acid unit can form the basis for a novel class of serine protease inhibitors.     

Reactions of molybdenum and tungsten halides with acetylenic hydrocarbons: an approach to the structure and pathways of formation of metathesis catalysts

A number of acetylene and mixed acetylene-nitrile complexes of tungsten and molybdenum halides have been prepared and investigated. Depending on the acetylene and the reaction conditions, one or more acetylene molecules may be coordinated to the metal. In the latter case acetylenes are coordinated not as single molecules but in systems of conjugated non-aromatic double bonds. On the basis of the supposed structure of such species and on their pyrolysis products a decomposition scheme is proposed, which consider the formation of apparent metathesis products as a side reaction of the cyclotrimerization of acetylenes to aromatic hydrocarbons.     

Furan Decorated Nucleoside Analogues as Fluorescent Probes: synthesis, photophysical evaluation and site-specific incorporation

The synthesis and photophysical evaluation of modified nucleoside analogues in which a five-membered heterocycle (furan, thiophene, oxazole, and thiazole) is attached to the 5-position of 2′-deoxyuridine are reported. The furan-containing derivative is identified as the most promising responsive nucleoside of this family due to its emission quantum efficiency and degree of sensitivity to its microenvironment. The furan moiety was then attached to the 5-position of 2′-deoxycytidine as well as the 8-position of adenosine and guanosine. Photophysical evaluation of these four furan-containing nucleoside analogues reveals distinct differences in the absorption, emission, and quantum efficiency depending upon the class of nucleoside (pyrimidine or purine). Comparing the photophysical properties of all furan-containing nucleosides, identifies the furan thymidine analogue, 5-(fur-2-yl)-2′-deoxyuridine, as the best candidate for use as a responsive fluorescent probe in nucleic acids. 5-(Fur-2-yl)-2′-deoxyuridine was then converted to the corresponding phosphoramidite and site specifically incorporated into DNA oligonucleotides with greater than 88% coupling efficiency. Such furan-modified oligonucleotides form stable duplexes upon hybridization to their complementary DNA strands and display favorable fluorescent features.     

Mesoionic compounds VIII. Synthesis of 3-phenylsydnonyl substituted alkenes. Some new photochromic sydnones

The reactions of 3-phenylsydnonyllithium with a variety of ketones to afford tertiary carbinols 4a-4i and their subsequent dehydration to 4-(3-phenylsydnonyl) alkenes 5a-5i are discussed. Among the alkenes, 2-[4-(3-phenylsydnonyl)]propene ( 5b ) and 1-[4-(3-phenylsydnonyl)]-1-cyclohexene ( 5i ) were photochromic. A Wittig reaction between ethyl-4-(3-phenylsydnonyl)-ketone and methylenetriphenylphosphorane afforded the photochromic 2-[4-(3-phenylsydnon-yl)]-1-butene(5j).     

An Assay for the Quantitation of Photofrin in Tissues and Fluids

A method for determining the concentration of Photofrin in tissues and biological fluids was developed. The procedure is based on the dissolution of biological material with Solvable a commercially available tissue so-lubilizer, followed by porphyrin-specific fluorescence detection and measurement. It was found necessary to use a quadratic standard curve for the estimation of unknown Photofrin concentrations. While this method is limited to compounds that are stable in strong base, it has the advantages of being sensitive, rapid and low cost .     

Decomposizioni di semifiltri e Γ-limiti sequenziali in reticoli completamente distributivi

Summary Sequential forms of De Giorgi's -limits are obtained via a decomposition of their carriers (carrier=sostegno) in the setting of completely distributive complete lattices. Moreover, the notion of carrier enables us to calculate easily the K-limits of epi- or hipo-graphs of arbitrary -limits.