Characterization of acoustic signals produced by ultraviolet laser ablation inductively coupled plasma atomic emission spectrometry

A simple device was designed to measure the acoustic signal accompanying laser ablation. The potential use of this signal for laser ablation-inductively coupled plasma atomic emission was examined. A frequency quadrupled pulsed Nd:YAG laser radiation was used for the ablation of glass, steel and ceramic samples. The relation between the acoustic signal, the laser energy, the analyte signal and the amount of ablated material was studied and evidence of the use of the acoustic signal for the exact focusing of the laser beam onto the sample surface was given. A more intense acoustic signal was observed for the exact focusing with a formation of larger ablation craters in glass and ceramics. Received: 25 June 1998 / Revised: 25 September 1998 / Accepted: 30 September 1998     

Characterization of acoustic signals produced by ultraviolet laser ablation inductively coupled plasma atomic emission spectrometry

A simple device was designed to measure the acoustic signal accompanying laser ablation. The potential use of this signal for laser ablation-inductively coupled plasma atomic emission was examined. A frequency quadrupled pulsed Nd:YAG laser radiation was used for the ablation of glass, steel and ceramic samples. The relation between the acoustic signal, the laser energy, the analyte signal and the amount of ablated material was studied and evidence of the use of the acoustic signal for the exact focusing of the laser beam onto the sample surface was given. A more intense acoustic signal was observed for the exact focusing with a formation of larger ablation craters in glass and ceramics.     

Incorporation of Ce3+ in crystalline Gd-silicate nanoclusters formed in silica

Structural and optical properties of sol–gel silica based glassceramics doped with 0.1 mol% Ce and codoped with Gd at high concentrations, from 5 mol% up to 40 mol%, are investigated and compared to those of analogous samples doped only with Ce. Raman scattering, transmission electron microscopy, and x-ray diffraction reveal the formation of Gd apatite-like silicate (Gd_4.67O(SiO₄)₃) and of Gd pyrosilicate (Gd₂Si₂O₇) nanophases whose morphology and crystallinity depend on the Gd concentration and thermal treatments. Optical absorption measurements demonstrate the role of the densification atmosphere in modifying the charge state of Ce ions. The incorporation of Ce³⁺ ions in the nanophases is put in evidence by photo- and radio-luminescence results.     

Growth and properties of Ti-Cu films with respect to plasma parameters in dual-magnetron sputtering discharges

Properties of different methods of magnetron sputtering (dc-MS, dual-MS and dual-HiPIMS) are studied and compared with respect to intermetallic Ti-Cu film formation. The quality and features of thin films are strongly influenced by the energy of incoming particles. The ion velocity distribution functions (IVDFs) were measured by time-resolved retarding field analyzer (RFA) in the substrate position. Thin films were characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffractometry (XRD) and X-ray reflectometry (XR). Properties and crystallography of Ti-Cu films are discussed as a function of ion energy which is affected by the mode of sputtering. It was found that IVDFs measured in pulsed discharges exhibit double-peak distribution. The IVDFs reach the maximum at ion energies about  ~8 eV. The ion saturated current is highest in dual-HiPIMS discharge (~5 μA/cm²) and is mostly represented by Cu⁺ and Ar⁺ ions. The mode of sputtering influences chemical composition and film formation. The copper forms polycrystalline fcc-phase while much smaller Ti particles enwraps the copper crystallites or are part of a solid solution.     

Investigation of multi-layered silicate ceramics using laser ablation optical emission spectrometry,laser ablation inductively coupled plasma mass spectrometry,and electron microprobe analysis

The applicability of laser ablation (LA) inductively coupled plasma (ICP) spectrometry for assessing elemental distributions in layered ceramics was investigated and compared with electron probe microanalysis (EPMA). Ordinary glazed wall tiles were employed as model specimens due to their defined structure and composition. They were used for calibration in the analysis of ancient pottery. A qualitative depth profile was acquired by single-spot laser drilling perpendicular to coatings with a Nd:YAG (1064 nm) laser coupled with an ICP optical emission spectrometer (OES). The lower lateral resolution associated with the laser spot diameter of 1.0 mm led to smoothing of the depth profile due to the averaging of local irregularities. In addition, transverse line scans by ablation across the tile section using an ArF* (193 nm) laser coupled with an ICP mass spectrometer (MS) were performed. LA-ICP-OES depth profiles and LA-ICP-MS transverse scans were validated by EPMA section scans and 2D back-scattered electrons images. The LA-ICP-OES acquisition was less dependent on sample surface and layer irregularities, whereas the transverse line scan over the tile section with the small-spot beam offered insight into the micromorphology of the individual layer. The combined approach revealed the occurrence of individual mineral grains, micro-heterogeneities and the character of interfaces between layers.     

Capillary electrophoretic method for nucleotide analysis in cells: application on inherited metabolic disorders

Purine and pyrimidine nucleotides influence many metabolic pathways and their analogs have been widely used in medicine. A capillary electrophoretic method was developed for measuring intracellular nucleotides. The final BGE consisted of 40 mM citric acid with addition of 0.8 mM CTAB titrated by gamma-aminobutyric acid to pH 4.4. The electrophoretic separations were carried out in an uncoated silica capillary (id/od - 75/375 microm; effective/total length - 90/97 cm). The method allows a complete separation of 21 nucleotides and deoxynucleotides within 15 min with separation efficiencies up to 400,000 theoretical plates per meter. Due to the use of an acidic separation medium, the method offers a high selectivity toward the studied analytes versus possible interferences from matrices. Sample preparation was optimized in order to shorten work-time and prevent analyte degradation. The method was applied for analyzing nucleotides in human erythrocytes and Chinese hamster ovary cells. Diagnostic potential for inherited metabolic disorders of nucleotide metabolism is presented.     

Study on Combined Optical and Electrochemical Analysis Using Indium‐tin‐oxide‐coated Optical Fiber Sensor

In this work an optical fiber sensor, where a lossy‐mode resonance (LMR) effect was obtained due to indium tin oxide (ITO) thin overlay, has been simultaneously applied as a working electrode in a 3‐electrode cyclic voltammetry electrochemical setup. Since LMR conditions highly depend on refractive index of a surrounding medium, an LMR‐based sensor was applied for optical investigations of electrolyte's properties at the ITO surface. We have found that the optical response of the sensor highly depends on the applied potential and its changes, as well as the properties of the investigated electrolyte, i. e., its composition and presence of a redox probe. Both optical and electrochemical response of the ITO‐LMR sensor to various concentrations of phosphate‐buffered saline (PBS), NaCl and Na₂SO₄, as well as scan rate were investigated and discussed. We have found that the responses in optical and electrical domains differ significantly and may deliver supplementary information about the investigated analyte.     

Novel use of silicon nanocrystals and nanodiamonds in biology

The presented work is aimed at the development of nontoxic nanocrystalline silicon fluorescence labels, biodegradable in living body and long-term stable, and of fluorescent nanodiamonds mainly for in vitro use. These novel fluorescence labels could be very good substitutes for commercially used quantum dots (e.g. cadmium compound quantum dots) which can be toxic according to the latest results. In this work, manufacturing of porous nanocrystalline silicon (por-Si) is described, several basic optical properties of por-Si are presented and the influence of Si nanocrystals, nanodiamonds, and milled silicon on the growth of a cell culture of L929 mouse fibroblast and HeLa cells is compared. Bio-interaction of nanoparticles was studied by optical transmission microscopy, time-lapse microphotography of cell culture evolution, fluorescence microscopy, fluorescence microspectroscopy, and scanning electron microscopy. The size and shape of nanocrystals were determined using atomic force microscopy (AFM).