Electric field-induced birefringence, optical rotatory power and conoscopic measurements of a chiral antiferroelectric smectic liquid crystal

Using a photoelastic modulator-based novel set-up, the electric field-induced in-plane birefringence and the optical rotatory power (ORP) were measured of an antiferroelectric liquid crystalline compound (12OF1M7) in its various phases using 30 µm homeotropic cells. Some specific signatures of the in-plane birefringence and of the ORP for the various phases are being established. A relatively small threshold field is needed for the unwinding process of the antiferroelectric phase with a unit cell of four layers [SmC_A*(1/2)] compared with that for two layers [SmC_A*(0)]. On application of the electric field on the high temperature side of the SmC_A*(1/2) phase (80.1-81.5°C), a field-induced phase transition is shown to occur directly to the SmC* phase, whereas on the lower temperature side (79.4-80.1°C) the transition takes place to SmC* via the SmC_A*(1/3) phase. The in-plane birefringence exhibits a critical power law dependence for the SmC*-SmA transition. The ORP changes sign within the temperature range of the phase with a unit cell of three layers, reflecting a change in the handedness during this phase. Using tilted conoscopy, the results for the biaxiality and the apparent tilt angle for a smectic liquid crystal with a tilt angle greater than 18° in the ferroelectric phase are reported. The biaxiality implies the difference in the refractive indices between the two minor axes of the refractive index ellipsoid. The optical transmittance at visible and IR wavelengths for free-standing films reveal characteristic reflection bands for these phases. The modulated structures of the reflected bands appear just above the SmC_A* phase and below SmC_A*(1/3); these are possibly due to an easy deformation of the phase by the surfaces.     

Formation of a tetranuclear copper (II) cluster assembled by metal-assisted hydrolysis and desulfurization of bis(3,5-dimethylpyrazolyl)methylphosphine sulfide, MeP(S)(3,5-Me2Pz)2

The reaction of methylphosphine sulfide, MeP(S)(3,5-Me2Pz)2, 1, with anhydrous CuCl2 affords a tetranuclear copper cluster[Cu2Cl2(3,5-Me2Pz)3(MePO3)]2, 2, and a dinuclear compound Cu2Cl4(3,5-Me2Pz)4, 3. This reaction involves a metal-assisted desulfurization along with concomitant hydrolysis of P-N bonds. The X-ray structures of 1-3 have been determined, and the crystal parameters for these are the following. 1: space group = C2/c, a = 15.2552(1) A, b = 8.7364(2) A, c = 21.4490(3) A, beta = 93.349(1) degrees, V = 2853.74(8) A3, and Z = 8. 2: space group = P2(1)/n, a = 12.5964(4) A, b = 15.7773(4) A, c = 13.9781(4) A, beta = 116.6280(10) degrees, V = 2483.32(12) A3, and Z = 2. 3: space group = P2(1)/c, a = 8.7137(8) A, b = 13.5493(14) A, c = 11.8847(12) A, beta = 106.179(2) degrees, V = 1347.6(2) A3, and Z = 2. The structure of 2 shows that it comprises two dinuclear copper cores bridged together by two tripodal methylphosphinate, MePO3, ligands. 2 is weakly antiferromagnetically coupled, as revealed by variable temperature magnetic susceptibility measurements.     

First structural characterization of binary AsIII and SbIII azides

The highly explosive molecules As(N(3))(3) and Sb(N(3))(3) were obtained in pure form by the reactions of the corresponding fluorides with (CH(3))(3)SiN(3) in SO(2) and purification by sublimation. The crystal structures and (14)N NMR, infrared, and Raman spectra were determined, and the results compared to ab initio second-order perturbation theory calculations. Whereas Sb(N(3))(3) possesses a propeller-shaped, pyramidal structure with perfect C(3) symmetry, the As(N(3))(3) molecule is significantly distorted from C(3) symmetry due to crystal packing effects.     

Silicon‐containing trifunctional and tetrafunctional cyanate esters: Synthesis,cure kinetics,and network properties

The synthesis and physical properties of new silicon‐containing polyfunctional cyanate ester monomers methyl[tris(4‐cyanatophenyl)]silane and tetrakis(4‐cyanatophenyl)silane, as well as polycyanurate networks formed from these monomers are reported. The higher crosslinking functionality compared to di(cyanate ester) monomers enables much higher ultimate glass transition temperatures to be obtained as a result of thermal cyclotrimerization. The ability to reach complete conversion is greatly enhanced by cocure of the new monomers with di(cyanate ester) monomers such as 1,1‐bis(4‐cyanatophenyl)ethane. The presence of silicon in these polycyanurate networks imparts improved resistance to rapid oxidation at elevated temperatures, resulting in char yields as high as 70% under nitrogen and 56% in air in the best‐performing networks. The water uptake in the silicon‐containing networks examined is 4–6 wt % after 96 h of immersion at 85 °C, considerably higher than both carbon‐containing and/or di(cyanate ester) analogs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 767–779     

A field-reversal method for measuring the parameters of a ferroelectric liquid crystal

A method for measuring the spontaneous polarization P _s, the switching time, the rotational viscosity γ_φ, and the d.c. conductivity σ is presented. The possibilities of estimating the azimuthal angle φ₀, the dielectric anisotropy δε and the dielectric permittivity ε_⊥ in the same experiment are also discussed. It is explicitly shown that the switching delay, though primarily dependent on the material and the applied field, is also dependent on the geometry of the cell.     

Ni Nanoparticles: Mild and Efficient Catalyst for the Chemoselective Synthesis of 2-Arylbenzimidazoles, 2-Arylbenzothiazoles,and Azomethines

A new and efficient method has been developed for the synthesis of biologically significant 2-arylbenzimidazoles, 2-arylbenzothiazoles, and azomethines using recyclable and inexpensive polyvinyl pyrrolidone (PVP)–stabilized Ni nanoparticles in ethylene glycol at room temperature in excellent yields.     

The high frequency dielectric response of a ferroelectric liquid crystal

Abstract

The temperature and frequency dependences of the complex dielectric susceptibility of a ferroelectric liquid crystal near the smectic C*-smectic A phase transition have been calculated using the classical and generalized Landau models. It is shown that although the dielectric response of the S*_C phase consists generally of four modes (soft, Goldstone, and two high frequency polarization modes) only three bands appear in the dielectric loss spectrum of ferroelectric liquid crystals at the S_A–S*_C phase transition. These results are in agreement with recent experimental data.     

Effect of preparation method on complexation of Cefdinir with β-cyclodextrin

The inclusion behaviour of β-cyclodextrin (βCD) was studied toward Cefdinir (CEF) in order to enhance the solubility and dissolution rate, following cyclodextrin complexation. Drug cyclodextrin solid systems were prepared by conventional methods of kneading (KN), co-evaporation (CE), spray drying (SD) and with a novel approach of microwave irradiation (MWI). The formation of inclusion complexes with βCD in the solid state, were confirmed by Differential scanning calorimetry (DSC), Fourier Transform Infrared spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) studies, and comparative studies on the in vitro dissolution of CEF were carried out. Characterization of binary system by DSC, FTIR and SEM indicated that SD and MWI method resulted in formation of true complexes. Binary systems showed significant increase in dissolution rate as compared to plain drug. Amongst the binary systems MWI products were prepared in least time with better yield and highest dissolution rate.