Fused silica capillary deactivation with D4 in the presence of oxygen

A new, simple procedure to deactivate fused silica capillaries without hydrothermal treatment is proposed. Based on high temperature reactions of octamethylcyclotetrasiloxane (D₄) in the presence of oxygen, this procedure results, upon coating with dimethylsilicone (SE-30), in columns which give almost symmetric peaks for as little as 150 pg of critical compounds, such as decylamine, thereby demonstrating very high inertness. A mechanism of the deactivation procedure, which, in contrast to previously developed procedures, is based on thermal reactions under aerobic conditions, is proposed.     

Determination of cisplatin and related platinum complexes in plasma ultrafiltrate and urine by high-performance liquid chromatography with on-line radioactivity detection

A reversed-phase ion-pair chromatographic method with on-line radioactivity detection for the simultaneous determination of 195mPt-labelled cisplatin and related platinum complexes has been developed. With this system a good resolution of various radiolabelled platinum complexes can be achieved. The detection limit of the radioactivity detector is 10 ng of cisplatin (specific activity of 15 MBq/mg cisplatin) per millilitre of urine or plasma ultrafiltrate. The detector response is independent of both the chemical structure of the platinum complexes and the matrix composition of the samples. This method may serve as a reference system for other high-performance liquid chromatographic systems with less specific and sensitive detectors.     

InclusiveK *0(890) and\bar K*^0 (890) production on beryllium byK − and π− at 175 GeV

The reactions \(K^ - Be \to {}^(\bar K^) *^0 (890)X,\pi ^ - Be \to {}^(\bar K^) *^0 (890)X\) , have been studied in a 175 GeV unseparated hadron beam in the kinematic range 0<x _F <1.0 andp _T ² <5 GeV². Integrated cross-sections and the dependence of the cross-sections on the longitudinal and transverse momentum are presented, together with quark counting rules predictions. The nuclear dependence ofK ^? fragmentation intoK ^*0(890) with respect to Feynmanx is investigated from hydrogen to beryllium.     

A preliminary 3D model for cytochrome P450 2D6 constructed by homology model building

Summary A homology model building study of cytochrome P450 2D6 has been carried out based on the crystal structure of cytochrome P450 101. The primary sequences of P450 101 and P450 2D6 were aligned by making use of an automated alignment procedure. This alignment was adjusted manually by matching -helices (C, D, G, I, J, K and L) and -sheets (3/4) of P450 101 that are proposed to be conserved in membrane-bound P450s (Ouzounis and Melvin [Eur. J. Biochem., 198 (1991) 307]) to the corresponding regions in the primary amino acid sequence of P450 2D6. Furthermore, -helices B, B and F were found to be conserved in P450 2D6. No significant homology between the remaining regions of P450 101 and P450 2D6 could be found and these regions were therefore deleted. A 3D model of P450 2D6 was constructed by copying the coordinates of the residues from the crystal structure of P450 101 to the corresponding residues in P450 2D6. The regions without a significant homology with P450 101 were not incorporated into the model. After energy-minimization of the resulting 3D model of P450 2D6, possible active site residues were identified by fitting the substrates debrisoquine and dextrometorphan into the proposed active site. Both substrates could be positioned into a planar pocket near the heme region formed by residues Val³⁷⁰, Pro³⁷¹, Leu³⁷², Trp³¹⁶, and part of the oxygen binding site of P450 2D6. Furthermore, the carboxylate group of either Asp¹⁰⁰ or Asp³⁰¹ was identified as a possible candidate for the proposed interaction with basic nitrogen atom(s) of the substrates. These findings are in accordance with a recently published predictive model for substrates of P450 2D6 [Koymans et al., Chem. Res. Toxicol., 5 (1992) 211].     

Advances in coupling a commercial total organic carbon analyser with an isotope ratio mass spectrometer to determine the isotopic signal of the total dissolved nitrogen pool

A new method has been developed to analyse 15N of the total dissolved nitrogen (TDN) pool. The method operates on a commercial total organic carbon (TOC) analyser coupled to an elemental analyser/isotope ratio mass spectrometer (EA-IRMS). Nitrogen compounds are combusted to nitric oxide (NO) and nitrogen dioxide (NO2) by high-temperature catalytic oxidation (HTCO), after which the NOx gas is transferred to an EA-IRMS for isotopic nitrogen analysis. The system is described, including five modifications of the system in order to overcome analytical problems. First, flow paths were modified to run both systems on helium as carrier gas, while complete sample oxidation was maintained. Secondly, the catalyst structure was adapted to allow high injection volumes at the given backpressures delivered by the EA system. Thirdly, we installed a Permapure dehumidification system as the standard Peltier element did not satisfy dehumidification requirements. Finally, we prevented the inflow of atmospheric nitrogen into the system. In a final stage, we are planning to automate the coupled system in order to run a continuous batch of up to 60 samples. We have obtained satisfactory results on the accuracy and precision of 180+/-1 per thousand potassium nitrate samples (IAEA, USGS-32). Running a batch of five samples resulted in a mean isotopic value of 178.8 per thousand with a standard deviation of 2.8 per thousand. Some important issues could not yet be addressed here, and will have to be evaluated once the system is running on a continuous base. However, the results appear promising and this system has the potential to become a method for TD15N analysis. An appropriate TD15N analysis method might open new challenges in aquatic and terrestrial ecosystem nitrogen studies, including a more comprehensive study of the dissolved organic nitrogen pool.     

Free release static coating of glass capillary columns; Static coating at elevated pressure — Theoretical considerations and practice

Summary Static coating of glass capillary columns has hitherto solely been carried out by evaporation of the stationary phase solvents under vacuum conditions. However, since a solvent vapour pressure higher than the external pressure is the only requirement for the vapour to flow out of the column, evacuation should not be necessary. Several important factors in the static coating procedure, such as mass (solvent vapour) — and heat transfer, heat of vaporisation of the solvent and viscosity of the stationary phase solution at elevated temperature and outlet pressure are discussed, principally to rationalise an improved static coating procedure. The alternative, so-called free-release static coating procedure, was evaluated practically by coating several columns with OV-101 and SE-30. Coating speed was found to be rapid and relatively constant whereas coating efficiency was between 80 and 100%.     

Effect of solvent composition on free release static coating of capillary columns

Summary Three aspects with respect to the selection of solvents for static coating of capillary columns, i.e. coating speed, occurrence of bumping and solubility of stationary phases are discussed. Hypotheses are proposed in an attempt to explain the observed facts that mixed solvents result in much higher coating speeds than those obtained from pure solvents, that a proper choice of solvents together with a good and uniform deactivitation of the column inner wall is needed to prevent bumping. Stationary phase solubility vs. solvent composition is also briefly discussed.