Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Extended Rees algebras and mixed multiplicities

Partially supported by the general research fund at the University of Kansas     

Deciding confluence of certain term rewriting systems in polynomial time

We present a characterization of confluence for term rewriting systems, which is then refined for special classes of rewriting systems. The refined characterization is used to obtain a polynomial time algorithm for deciding the confluence of ground term rewrite systems. The same approach also shows the decidability of confluence for shallow and linear term rewriting systems. The decision procedure has a polynomial time complexity under the assumption that the maximum arity of a function symbol in the signature is a constant.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Cyclic voltammetric studies of certain industrially potential iron chelate catalysts

 For the analysis of infrared spectroscopic bands and complex patterns partial cross correlation functions of a sample spectrum with reference spectra are calculated. The chosen ranges of the spectra are based on empirical knowledge of infrared spectrum structure correlations. The normalised maxima of the partial cross correlation functions are interpreted as fuzzy truth values and are combined by fuzzy logical operators. By application of that procedure larger common substructures will be derived from the reference spectra than by a maximum common substructure search based on the complete spectra. Received: 30 October 1996/Revised: 24 February 1997/Accepted: 26 February 1997     

Weak radiative decays of hyperons within theSU(6) broken quark-diquark model

In view of persisting discrepancy between experimental and theoretical results, specially in the weak radiative decays of∑ ⁺ andΞ ⁰, we analyse these decays within the framework of the QCD inspired quark-diquark model. On introducing a slightSU(6) breaking we obtainα(∑ ⁺→p+γ)≈?0.9 which is in excellent agreement with experimental value. Other decays are also improved in this scheme.     

Flow-injection spectrophotometric determination of residual free chlorine and chloramine

2,4-Dinitrophenylhydrazine has been suggested as a new reagent for the flow-injection spectrophotometric determination of residual chlorine based on its oxidation to 2,4-dinitrophenyldiazonium ion. The measurement of the decrease in colour intensity under reversed flow-injection (reagent injection) conditions has been used for the determination of 0.1–10 mg/l Cl present as free or combined chlorine, and for its speciation. The limit of detection was 0.05 mg/l Cl. Copper (II), iron (III) and many other ions have been found not to vitiate the results.     

Spot-test detection of aryl hydrazines, hydrazones, osazones, oximes and aromatic amines

Arylhydrazines are detected by oxidation with N-bromosuccinimide and coupling with resorcinol to form azo-dyes which are intensely coloured in alkaline media. Hydrazones and osazones are hydrolysed to form the arylhydrazines, which are then tested for 4-Nitro- and 2,4-dinitrophenylhydrazines are tested for by forming their hydrazone with salicylaldehyde and adding alkali to produce a violet colour. The hydroxylamine formed by the hydrolysis of oximes is oxidized by iodine monochloride in the presence of sulphanilic acid; coupling with 8-hydroxyquinoline forms a dye that is red in alkali. Intense colours are immediately produced when primary, secondary and tertiary aromatic amines are mixed with diacetoxyiodobenzene. All the tests are sensitive and appear to be specific.