Structural, electrical and optical properties of ZnS films deposited by close-spaced evaporation

ZnS films have been deposited on glass substrates by close-spaced evaporation (CSE) technique. The films were grown at different temperatures in the range, 200-350 °C. The layers have been characterized with X-ray diffractometer (XRD), atomic force microscope (AFM), energy dispersive analysis of X-rays (EDAX) and optical spectrophotometer to evaluate the quality of the layers for photovoltaic applications. The studies showed that the optimum substrate temperature for the growth of ZnS layers was 300 °C. The films grown at these temperatures exhibited cubic structure with nearly stoichiometric composition. The AFM data revealed that the films had nano-sized grains with a grain size of ∼40 nm. The optical studies exhibited direct allowed transition with an energy band gap of 3.61 eV. The other structural and optical parameters such as lattice stress, dislocation density, refractive index and extinction coefficient were also evaluated. The temperature-dependent conductivity measured in the range, 303-523 K showed a change in the conduction mechanism at 120 °C. The activation energy values evaluated using the temperature dependence of electrical conductivity are 7 and 29 meV at low and high temperature regions, respectively.     

Structural studies on ruthenium(II) complexes used in interphase catalysis for the hydrogenation of ketones

Structural studies were performed on catalytically active ruthenium(II) complexes used in interphases, by means of XAFS spectroscopy. The EXAFS investigations indicate that the complexes retain their structural integrity when they are embedded on polysiloxane matrices to form stationary phase materials. The AXAFS studies reveal that the variations in the catalytic activity of the complexes with different ligands can be correlated to the differences in the electronic structure around the active ruthenium center. The EXAFS investigations show that, in asymmetric transfer hydrogenation reactions catalysed by ruthenium(II) complexes, the co‐catalyst plays a crucial role not only in enhancing the catalytic activity, but also in determining the structure of the intermediate species. Copyright © 2007 John Wiley & Sons, Ltd.     

New sphingolipids and a sterol from a lobophytum species of the Indian ocean

Chemical investigation of a soft coral species of the genus Lobophytum has resulted in the isolation of three new sphingolipids--(2S,3S,4R)-2-nonadecanoylamino-octadecane-1,3,4-triol (1), (2S,3R,4E,8E)-[(2'R)-2'-hydroxyheptadecanoylamino]-4,8-octadecadiene-1,3-diol (2), 1-O-(beta-D-glucopyranosyl)-(2S,3R,4E,8E)-2-[(2'R)-2'-hydroxynonadecanoylamino]-9-methyl-4,8-octadecadiene-1,3-diol (3) and a sterol--(24S)-ergost-5-en-3beta,7beta-diol (4) along with the known sphingolipid--(2S,3R,4E,8E)-2-hexadecanoylamino-4,8-octadecadien-1,3-diol (5) which showed cytotoxicity against human peripheral blood mononuclear cells (PBMC).     

Two new 5-deoxyflavones from Albizia odoratissima

Two new 5-deoxyflavones, 7,8-dimethoxy-3',4'-methylenedioxyflavone (1) and 7,2',4'-trimethoxyflavone (2) together with a known flavone, 7,4'-dimethoxy-3'-hydroxyflavone (3) were isolated from the rootbark of Albizia odoratissima. The structures of these new compounds were elucidated by electrospray ionization mass spectrometry (ESI-MS) and 1D and 2D-NMR spectral studies including (1)H-(1)H correlation spectroscopy (COSY), heteronuclear single quantum coherence (HSQC), heteronuclear multiple bond connectivity (HMBC) and nuclear Overhauser enhancement spectroscopy (NOESY).     

Synthesis of some new metal-containing polyurethanes

Some new metal-containing polyurethanes were synthesized from manganese and lead salts of mono(hydroxyethyl)phthalate by condensing them with hexamethylene diisocyanate and toluene diisocyanate in dimethylformamide as solvent. The polymers were characterized by viscometry, infrared spectroscopy and thermal analysis. The decomposition temperatures of these polymers were found to be significantly lower than those of metal-free polymers of similar structure. However, the rates of decomposition of metal-containing polyurethanes were lower than those of polyurethanes having no metal. Inherent viscosities in DMSO at 30° of these polyurethanes were low, ranging from 0.043 to 0.067.     

Sensitive and selective spectrophotometric method for the determination of trace amounts of osmium with 1,2,3-indanetrione monothiosemicarbazone

Summary Sensitive and Selective Spectrophotometric Method for the Determination of Trace Amounts of Osmium with 1,2,3-Indanetrione Monothiosemicarbazone A simple, sensitive and selective spectrophotometric method has been developed for the determination of osmium using 1,2,3-indane-trione monothiosemicarbazone (ITMT). The method is based on the colour reaction between ITMT and osmium(VIII) in hydrochloric acid (0.32–0.60 M) medium. The calibration graph for measurement at 440 nm is linear in the range 1.4–33.6g of osmium per 25ml, with a molar absorptivity of 6.43×10⁴l·mole^–1·cm^–1. The effect of interferences has been studied and the method applied to the determination of osmium in synthetic samples whose composition correspond to osmiridium or syserkite, with good results.     

A study on the mechanism of failure in keratin

The mechanical behavior of keratin is studied, focusing on the mechanism of failure. For this purpose, a new procedure has been suggested to differentiate the time-dependent and time-independent losses of energy at different strain levels. The matrix of keratin fibers was found to play an important role in the mechanism of failure.     

Lead-selective membrane electrodes based on dithiophenediazacrown ether derivatives

Three double-armed diazacrown ethers with two thiophene side groups, 7,16-dithenyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTDC), 7,16-dithenoyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTODC), and 7,16-di-(2-thiopheneacetyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTAODC), have been synthesized and used as novel neutral lead(II) ionophores in ion selective electrode applications. The relationship between the molecular structure of these ionophores and electrochemical properties (linear range, response time, selectivity) of the membrane electrode is discussed. The optimum conditions for the preparation of the electrodes are described. The optimized dithenoyldiazacrown had a detection limit of pPb = 5.7, and Nernstian range with slope 29.2 mV decade⁻¹ from pPb = 5.0 to 2.7. Mercury and silver ions are the major interferences. These electrodes are applied to potentiometric titrations of lead(II) ions and show promise for the determination of lead ions in water samples.     

A model for surfactant distribution in latex coatings

The presence of surfactants in dried latex films can adversely affect the adhesive, water-resistant, and gloss properties, so investigating the surfactant distribution in latex coatings is of prime industrial relevance. Here we present a model that predicts the distribution of surfactant in a latex coating during the solvent evaporation stage. The conservation equation for surfactant during solvent evaporation is solved in the limit of infinite particle Peclet numbers, a dimensionless quantity giving the measure of relative magnitudes of evaporative to diffusive fluxes. A parametric analysis using the model reveals that the surfactant adsorption isotherm is the determining physical parameter. The model always predicts surfactant excesses at the top surface and either excess or depletion at the bottom surface depending on the isotherm. Uniform distributions are predicted for low surfactant Peclet numbers. Attenuated total reflection Fourier transform infrared spectroscopic probes on film surfaces conform to the behavior predicted by the model.