A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%).     

Evidences of cyclodextrin-mediated enantioselective photodegradation of rac-nicardipine by capillary electrophoresis

Capillary electrophoresis (CE) was applied to photostability studies on rac-nicardipine, a dihydropyridine chiral drug. CE methods were developed able to provide the enantioresolution of drug and its separation from the photodegradation products. Enantioresolution was achieved using 5% sulfated-beta-cyclodextrin (S-beta-CD) as chiral selector in 20 mM triethanolammonium phosphate solution (pH 3). The photostability studies were carried out on inclusion complexes of rac-nicardipine with beta-cyclodextrin (beta-CD) and (2-hydroxypropyl)-beta-cyclodextrin (HP-beta-CD) in aqueous solutions (pH 7.4 and 5). The CE analysis of the solutions exposed to UV-A and UV-B radiations showed a photoprotective effect by beta-CD; conversely, HP-beta-CD proved to favor the drug photodegradation. Moreover, evidences for CDs-mediated stereoselective photodegradation of rac-nicardipine were obtained. In fact, two distinct photodegradation profiles were observed for the nicardipine enantiomers in the presence of the CDs. The photodegradation was found to follow an apparent first-order kinetics and two different kinetic constants (k) were obtained for the two enantiomers. After exposure to UV-A and UV-B radiations, the solutions contained residual nicardipine with a significant change in the enantiomeric ratio; this effect was depending on the CD used for the inclusion complexation.     

Analysis of basic hair dyes by HPLC with on-line post-column photochemical derivatisation

Summary A reversed phase liquid chromatographic method is proposed for the analysis of basic hair dyes (raw materials and colourant formulations). The performance of the method was enhanced by introducing post-column on-line photochemical derivatisation in combination with a Diode Array Detector. On-line photoderivatisation provided an effective way of selectively transforming the analytes to compounds with different spectral properties. For each analyte two characteristic UV-Visible spectra (photoreactor on and off) were obtained with the same mobile phase and this information in combination with the chromatographic data (k' at pH 3.0 and 4.5) enabled the unambiguous identification of both commonly used, approved, and banned basic hair dyes. Additionally, this approach was found useful to improve the method sensitivity, allowing the determination of analytes present in low concentration (0.03%) in complex commercial formulations.This work constitutes part of the thesis for the Dottorato di Ricerche of Roberto Gotti.     

High-Pressure,High-Resolution Nuclear Magnetic Resonance (HPHR-NMR.): A Tool in Chemical Kinetics

In recent years the volume of activation Δ V* has become a powerful tool in chemical kinetics. High resolution NMR. spectroscopy is now one of the most common techniques used in the study of the kinetics of labile chemical systems. In order to measure Δ V* by this technique, we have built a ¹H-probe-head, for a Fourier transform spectrometer, working up to 4 kbar and with a resolution of 0.6 Hz. The temperature is regulated and measured with an accuracy better than 0.2°. The high pressure probe-head has been tested on a chemical system showing a dissociative-associative crossover for the ligand substitution mechanism. It had been shown previously that the ligand exchange TaBr₅ · L + *L ? TaBr₅ · *L + L proceeds via a D mechanism when L=Me₂O, and via an I_a mechanism when L=Me₂S. As expected, ΔV is positive (+30.5 ± 2.0 cm³ mol^?1) for the dissociative process and negative (?12.6 ± 1.0 cm³ mol^?1) for the associative one.     

Nucleophilic additions of lithiated allylphenylsulfone to nitrones: experimental and theoretical investigations

The nucleophilic addition of lithiated allylphenylsulfone to nitrones at −80 °C proceeds exclusively α to the phenylsulfonyl group affording anti adducts in high yield. At 0 °C isoxazolidines are obtained with complete all-trans selectivity. The formation of these compounds involves isomerization of the allylsulphonyl moiety to give a transient vinylsulfone that then undergoes a subsequent intramolecular Michael addition. The addition to several nitrones has been studied and theoretical calculations have been refined to accurately explain the selectivity of the allylation reaction.     

Monolithic micro-immobilized-enzyme reactor with human recombinant acetylcholinesterase for on-line inhibition studies

The development and characterization of a human recombinant acetylcholinesterase (hrAChE) micro-immobilized-enzyme reactor (IMER), prepared by using an in situ immobilization procedure is reported. hrAChE was covalently immobilized on an ethylenediamine (EDA) monolithic convective interaction media (CIM) disk (12 mm x 3 mm i.d.), previously derivatized with glutaraldehyde. The optimal conditions for the immobilization were: 12 microg of enzyme dissolved in 800 microl of phosphate buffer (50 mM, pH 6.0). The mixture was gently agitated overnight at 4 degrees C. The resulting Schiff bases were reduced by cyanoborohydride and the remaining aldehydic groups were condensed with monoethanolamine. Under these conditions, 0.22 U of hrAChE were immobilized with retention of 3.0% of the initial enzymatic activity. The activity of the immobilized hrAChE was stable for over 60 days. The activity and kinetic parameters of the hrAChE micro-IMER were investigated by inserting the micro-IMER in a HPLC system and it was demonstrated that the enzyme retained its activity. The micro-IMER was characterized in terms of units of immobilized enzyme and best conditions for immobilization yield. IMERs were compared for their relative enzyme stability, immobilized units, yield and aspecific matrix interactions. The effect of AChE inhibitors was evaluated by the simultaneous injection of each inhibitor with the substrate. The relative IC50 values were found in agreement with those derived by the conventional kinetic spectrophotometric method. In comparison with previously developed AChE-based IMERs, AChE monolithic micro-IMER showed advantages in terms of reduction of analysis time (2 min), lower aspecific matrix interactions and lower backpressure. Included in a HPLC system, it can be used for the rapid screening of new compounds' inhibitory potency. The advantages over the conventional methods are the increased enzyme stability and system automation which allows a large number of compounds to be analyzed in continuous.     

Determination of 5-aminosalicylic acid related impurities by micellar electrokinetic chromatography with an ion-pair reagent

A micellar electrokinetic chromatographic (MEKC) method was developed for the quantification of mesalazine or 5-aminosalicylic acid (5-ASA) and its major impurities 3-aminosalicylic acid, salicylic acid, sulfanilic acid and 4-aminophenol. The optimisation of the experimental conditions was carried out considering some important requirements: resolution, reproducibility, detection limits of 0.1% (m/m) or less, short total analysis time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds; the addition of tetrabutylammonium bromide (TBAB) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as TBAB concentration, SDS concentration, background electrolyte pH and concentration, were evaluated. Using a fused-silica capillary (8.5 cm effective length) complete analysis was obtained in a very short time. Under the optimised final conditions [120 mM 3-(cyclohexylamino)-2-hydroxy-1-propanesulfonic acid buffer, pH 10.20, 65 mM SDS in the presence of 55 mM TBAB and 5% methanol] the method was validated for specificity, precision, linearity, limits of detection and quantitation, and robustness: the 5-ASA related impurities can be quantified at least at the 0.1% (m/m) level.     

Modified micellar electrokinetic chromatography in the analysis of catechins and xanthines in chocolate

Modified micellar electrokinetic chromatography (MEKC) analysis of monomeric flavanols (catechin and epicatechin) and methylxanthines (caffeine and theobromine) in chocolate and cocoa was performed by using sodium dodecyl sulfate (SDS) as a principal component of the running buffer. Because of the reported poor stability of catechins in alkaline solutions, acidic conditions (pH 2.5) were chosen and consequently the electroosmotic flow (EOF) was significantly suppressed; this resulted in a fast anodic migration of the analytes partitioned into the SDS micelles. Under these conditions, variations of either pH value in acidic range or SDS concentration, showed to be not suitable to modulate the selectivity. To overcome this limit, use of additives to the SDS-based running buffer was successfully applied and three different systems were optimized for the separation of (+)-catechin, (-)-epicatechin, caffeine, and theobromine in chocolate and cocoa powder samples. In particular, two mixed micelle systems were applied; the first consisted of a mixture of SDS and 3-[(3-cholamidopropyl)dimethylammonio]-1-propansulfonate (CHAPS) with a composition of 90 mM and 10 mM, respectively; the second was SDS and taurodeoxycholic acid sodium salt (TDC) with a composition of 70 mM and 30 mM, respectively. A further MEKC approach was developed by addition of 10 mM hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to the SDS solution (90 mM); it provided a useful cyclodextrin(CD)-modified MEKC. By applying the optimized conditions, different separation profiles of the flavanols and methylxanthines were obtained showing interesting potential of these combined systems; their integrated application showed to be useful for the identification of the low level of (+)-catechin in certain real samples. The CD-MEKC approach was validated and applied to the determination of catechins and methylxanthines in aqueous extracts from four different commercial chocolate types (black and milk) and two cocoa powders.     

A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%). Received: 4 November 1996 / Revised: 9 June 1997 / Accepted: 16 June 1997