FTIR spectroscopy study of CO adsorption on Pt-Na-mordenite

Different carbonyls are formed after CO adsorption at ambient temperature on a Pt-Na-mordenite (Pt-Na-MOR) sample. Pt(3+)(CO)(2) dicarbonyls (nu(s) at 2205 cm(-1) and nu(as) at 2167 cm(-1)) are decomposed without formation of monocarbonyls. The respective mixed-ligand species, Pt(3+)((12)CO)((13)CO), formed after (12)CO-(13)CO coadsorption, display bands at 2192 and 2131 cm(-1), in excellent agreement with the theoretically calculated values. Pt(2+)-CO species absorb at 2145 cm(-1) and are not able to accept a second CO molecule. Pt(+)-CO carbonyls are characterized by a band at 2111 cm(-1). Under CO equilibrium pressure, these species are converted into dicarbonyls (nu(s) at 2135 cm(-1) and nu(as) at 2101 cm(-1)). The respective mixed-ligand species, Pt(+)((12)CO)((13)CO), manifest bands at 2123 and 2069 cm(-1), in good agreement again with the theory. Different carbonyls of metallic platinum are observed below 2100 cm(-)(1). In addition, weakly adsorbed CO was registered as Na(+)-CO complexes (2177 and 2165 cm(-1)) and Na(+)-OC-Na(+) species (2138 cm(-1)). It was found that during desorption of CO platinum was reduced, ultimately to metal. However, heating in a NO + O(2) mixture leads to reoxidation of the metal particles and restoration of the initial state of the sample.     

New types of nonclassical iridium carbonyls formed in Ir-ZSM-5: a Fourier transform infrared spectroscopy investigation

In this work we report some new nonclassical carbonyls of iridium formed after CO adsorption on Ir-ZSM-5 (Ir-MFI). Mainly Ir+ cations were found on sample activated at 523 K and reduced by CO at the same temperature. With CO they formed Ir+(CO)2 gem-dicarbonyls (2104 and 2033 cm(-1)) that decomposed at 673 K without leaving a measurable fraction of monocarbonyls. The dicarbonyl structure was established by 12CO-13CO coadsortpion experiments. In the presence of CO in the gaseous phase and at ambient temperature the Ir+(CO)2 dicarbonyls were converted into Ir+(CO)3 species (2182, 2099, and 2074 cm(-1)). At 100 K these complexes are able to accommodate a fourth CO molecule thus producing tetracarbonyls (2155, 2145, 2125, and 2105 cm(-1)). The results are explained by the high coordinative unsaturation of the Ir+ cations in the ZSM-5 matrix. This is also the reason for the formation of mixed Ir+(H2O)(CO)2 species after CO-H2O coadsorption (2087 and 2015 cm(-1)). Evacuation of the sample at 673 K, followed by treatment with CO at 523 K, generates Ir2+ cations. With CO these cations form another kind of geminal complex, namely, Ir2+(CO)2 species (2173 and 2129 cm(-1)). Here again, the structure was confirmed by 12CO-13CO coadsortpion experiments. These dicarbonyls are decomposed at 573 K (again without producing monocarbonyls) and are able to accommodate additionally neither CO nor water molecules. The results are explained by the smaller cationic radius of Ir2+ (as compared to Ir+), which is associated with a decrease of the number of ligands required for coordinative saturation.     

Purification of Hydrogen from CO with Cu/ZSM-5 Adsorbents

The transition to a hydrogen economy requires the development of cost-effective methods for purifying hydrogen from CO. In this study, we explore the possibilities of Cu/ZSM-5 as an adsorbent for this purpose. Samples obtained by cation exchange from aqueous solution (AE) and solid-state exchange with CuCl (SE) were characterized by in situ EPR and FTIR, H₂-TPR, CO-TPD, etc. The AE samples possess mainly isolated Cu²⁺ cations not adsorbing CO. Reduction generates Cu⁺ sites demonstrating different affinity to CO, with the strongest centres desorbing CO at about 350 °C. The SE samples have about twice higher Cu/Al ratios, as one H⁺ is exchanged with one Cu⁺ cation. Although some of the introduced Cu⁺ sites are oxidized to Cu²⁺ upon contact with air, they easily recover their original oxidation state after thermal treatment in vacuum or under inert gas stream. In addition, these Cu⁺ centres regenerate at relatively low temperatures. It is important that water does not block the CO adsorption sites because of the formation of Cu⁺(CO)(H₂O)_x complexes. Dynamic adsorption studies show that Cu/ZSM-5 selectively adsorbs CO in the presence of hydrogen. The results indicate that the SE samples are very perspective materials for purification of H₂ from CO.     

Hydrolytic Activity of Vanadate toward Serine-Containing Peptides Studied by Kinetic Experiments and DFT Theory

Hydrolysis of dipeptides glycylserine (Gly-Ser), leucylserine (Leu-Ser), histidylserine (His-Ser), glycylalanine (Gly-Ala), and serylglycine (Ser-Gly) was examined in vanadate solutions by means of (1)H, (13)C, and (51)V NMR spectroscopy. In the presence of a mixture of oxovanadates, the hydrolysis of the peptide bond in Gly-Ser proceeds under the physiological pH and temperature (37 °C, pD 7.4) with a rate constant of 8.9 × 10(-8) s(-1). NMR and EPR spectra did not show evidence for the formation of paramagnetic species, excluding the possibility of V(V) reduction to V(IV) and indicating that the cleavage of the peptide bond is purely hydrolytic. The pD dependence of k(obs) exhibits a bell-shaped profile, with the fastest hydrolysis observed at pD 7.4. Combined (1)H, (13)C, and (51)V NMR experiments revealed formation of three complexes between Gly-Ser and vanadate, of which only one complex, designated Complex 2, formed via coordination of amide oxygen and amino nitrogen to vanadate, is proposed to be hydrolytically active. Kinetic experiments at pD 7.4 performed by using a fixed amount of Gly-Ser and increasing amounts of Na(3)VO(4) allowed calculation of the formation constant for the Gly-Ser/VO(4)(3-) complex (K(f) = 16.1 M(-1)). The structure of the hydrolytically active Complex 2 is suggested also on the basis of DFT calculations. The energy difference between Complex 2 and the major complex detected in the reaction mixture, Complex 1, is calculated to be 7.1 kcal/mol in favor of the latter. The analysis of the molecular properties of Gly-Ser and their change upon different modes of coordination to the vanadate pointed out that only in Complex 2 the amide carbon is suitable for attack by the hydroxyl group in the Ser side chain, which acts as an effective nucleophile. The origin of the hydrolytic activity of vanadate is most likely a combination of the polarization of amide oxygen in Gly-Ser due to the binding to vanadate, followed by the intramolecular attack of the Ser hydroxyl group.     

NMR,IR and DFT studies of phenylplatinum complexes with O-monodentate coordinated silsesquioxanate and auxiliary phosphine ligands

The molecular structure and spectroscopic properties of a series of phenylplatinum complexes containing silsesquioxanate and phosphine ligands with general formula trans-[Pt{O₁₀Si₇(R)₇(OH)₂}(Ph)(L)₂] (1: R = cyclo-C₅H₉, L = PEt₃; 2: R = iso-C₄H₉, L = PEt₃; 3: R = CH₃, L = PEt₃; 4: R = cyclo-C₅H₉, L = PMe₃; 5: R = cyclo-C₅H₉, L = PMe₂Ph; 6: R = cyclo-C₅H₉, L = PPh₂Me; 7: R = cyclo-C₅H₉, L = PPh₃) have been investigated by DFT/OPW91/6-31G(d) calculations, ¹H, ¹³C, ²⁹Si and ³¹P NMR and IR spectroscopy. DFT molecular modeling based on available X-ray and NMR data for complexes 1 and 2 allowed deriving structure-NMR spectra correlations. It was found that the alkyl substituents (R) attached to Si atoms, cyclo-C₅H₉, iso-C₄H₉ and CH₃, slightly influence the geometry and multinuclear NMR parameters of the complexes in the series studied. The molecular structures of the Pt(II) complexes with R = cyclo-C₅H₉ (4–7) were predicted by DFT calculations of their simplified models with R = CH₃ (4′?7′). The geometry optimizations of 4′?7′ showed square-planar configuration of Pt(II) center bonded to two trans phosphine ligands, a phenyl group and an O-monocoordinated silsesquioxanate. The structures 4′?6′ are stabilized by two intramolecular hydrogen bonds similar to 1 and 2. A fast conformer exchange process A?B and switching of H-bonds in solution of 1–6 were suggested based on (i) the calculated conformer energies and small barrier of the process, and (ii) the observed single ¹H NMR signal at low magnetic field. The stability of the Pt(II) complexes depends on the nature of the phosphine ligands and decreases in the order PMe₂Ph > PMe₃ > PPh₂Me > PEt₃ > PPh₃. The PPh₃ ligands attached to Pt(II) in 7 cause the largest geometry changes and a new set of weaker hydrogen bonds. The comparison of the calculated NMR and IR parameters with the experimental spectroscopic data reveals good coincidence and thus confirmed the suggested molecular structures.     

Formation of nonclassical carbonyls of Au3+ in zeolite NaY: characterization by infrared spectroscopy

Adsorption of CO on gold supported in zeolite NaY at 85 K led to the formation of (i) various carbonyls and isocarbonyls typical of the zeolite and (ii) carbonyls formed at cationic gold sites (observed in the 2186-2171 cm(-1) region). Analysis of the behavior of the bands allows their assignment to carbonyls of Au(3+) ions. At temperatures higher than 220 K, CO adsorption led to the formation of a new type of Au(3+)-CO species (2207 cm(-1)). Once formed, these complexes could be transformed into the dicarbonyls Au(3+)(CO)(2) when the sample was cooled to 85 K in the presence of CO. The results are explained by migration of Au(3+) ions to more accessible positions within the zeolite at increasing temperatures. When a CO molecule is already adsorbed, it stabilizes the Au(3+) ion in the new position, and a second CO molecule can be coordinated, thus forming a geminal species. These results are the first evidence of Au(3+)(CO)(2) complexes.     

Increased imaging speed and force sensitivity for bio-applications with small cantilevers using a conventional AFM setup

In this study, we demonstrate the increased performance in speed and sensitivity achieved by the use of small AFM cantilevers on a standard AFM system. For this, small rectangular silicon oxynitride cantilevers were utilized to arrive at faster atomic force microscopy (AFM) imaging times and more sensitive molecular recognition force spectroscopy (MRFS) experiments. The cantilevers we used had lengths between 13 and 46μm, a width of about 11μm, and a thickness between 150 and 600nm. They were coated with chromium and gold on the backside for a better laser reflection. We characterized these small cantilevers through their frequency spectrum and with electron microscopy. Due to their small size and high resonance frequency we were able to increase the imaging speed by a factor of 10 without any loss in resolution for images from several μm scansize down to the nanometer scale. This was shown on bacterial surface layers (s-layer) with tapping mode under aqueous, near physiological conditions and on nuclear membranes in contact mode in ambient environment. In addition, we showed that single molecular forces can be measured with an up to 5 times higher force sensitivity in comparison to conventional cantilevers with similar spring constants.     

Total internal reflection imaging of microorganism adhesion using an oil immersion objective

In this paper, we report the results of total internal reflection microscopy investigations of the interaction of two types of microorganisms: Saccharomyces cerevisiae and Escherichia coli with substrates. It is shown that with this method qualitative and quantitative information about cells-substrate interaction can be obtained. One can easily make a difference between attached and non-attached as well as between dead and alive cells, and more generally can follow the dynamics of the process of cells' attachment to substrates. Quantitative information about the cell size and cell-substrate distance is obtained by using a model in which yeast cells and bacteria are approximated by ellipsoids, and multiple reflections of the evanescent waves between the cells and the substrate are neglected.     

Effect of the nature of mendiaxon–X interactions (X= Na, Cu, H) and the hydrogen bonding on the ν(C=O) behavior: theoretical and spectroscopic study

Theoretical and spectroscopic (IR and Raman) study of different 7-hydroxy-4-methylcoumarin (mendiaxon) systems (mend⁻, mendNa, mendCu, mendH and mendH · 2H₂O) were performed at B3LYP/6-31G(d) and B3LYP/6-31++G(d,p) levels of theory. The geometric and electronic structures as well as the vibrational behavior of the systems studied were discussed: (1) as to the changes that occurred in the anion coumarin ring upon the mend⁻–X⁺ (X⁺ =Na⁺, Cu⁺, H⁺) interactions and (2) as to the changes that occurred in mendH due to hydrogen bondings in mendH · 2H₂O. The largest bond length changes in the anion coumarin ring were obtained for mendH and the smallest ones for mendNa. The bond length changes were mainly produced from the electrostatic effect of the positive charge of X. The induced polarization of the C=O bond upon the mend⁻–X⁺ interactions was found to be opposite to the basic one and it led to shorter C=O bond lengths (higher ν(C=O) frequencies) in the order: mendNa, mendCu and mendH. Conversely, upon the hydrogen bonding the induced polarization of the C=O bond was found in the same direction as the basic one and it produced elongation to the C=O bond length (lower ν(C=O) frequency). On the basis of the correlations found, the ν(C=O) positions in mendNa, mendCu, mendH and mendH · 2H₂O were explained.     

Sensitivity studies of pollutant concentrations calculated by the UNI-DEM with respect to the input emissions

The influence of emission levels on the concentrations of four important air pollutants (ammonia, ozone, ammonium sulphate and ammonium nitrate) over three European cities (Milan, Manchester, and Edinburgh) with different geographical locations is considered. Sensitivity analysis of the output of the Unified Danish Eulerian Model according to emission levels is provided. The Sobol’ variance-based approach for global sensitivity analysis has been applied to compute the corresponding sensitivity measures. To measure the influence of the variation of emission levels over the pollutants concentrations the Sobol’ global sensitivity indices are estimated using efficient techniques for small sensitivity indices to avoid the effect of loss of accuracy. Theoretical studies, as well as, practical computations are performed in order to analyze efficiency of various variance reduction techniques for computing small indices. The importance of accurate estimation of small sensitivity indices is analyzed. It is shown that the correlated sampling technique for small sensitivity indices gives reliable results for the full set of indices. Its superior efficiency is studied in details.