Rheological and physical properties of aliphatic hyperbranched polyesters

The effects of the size (pseudo‐generation number) and nature of end groups on physical and rheological properties were investigated for a series of hyperbranched polyesters based on an ethoxylated pentaerythritol core and 2,2‐bis‐(hydroxymethyl)propionic acid repeat units. The observed linear dependence of the melt viscosity on the molar mass in the high pseudo‐generation‐number limit indicated that entanglement effects were substantially absent. Moreover, the marked influence of end capping of the end groups on the physical and rheological properties suggested that intermolecular interactions were dominated by contacts between the outer shells of the molecules, in which the end groups were assumed to be concentrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1218–1225, 2004     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

A tight upper bound for the number of intersections between two rectangular paths

The problem of finding the number of intersections between two geometric figures in the plane has been studied extensively in literature. In this paper, the geometric figure comprising a continuous rectilinear path (called rectangular path) is considered, and a tight (least) upper bound onI(P, Q), the number of intersections between two rectangular pathsP andQ, is given.Editors' Note: One of our referees has reported that the main result of this paper has recently been given independently by a Chinese researcher at the University of Science and Technology, Hefei, P. R. of China. His paper is under publication in the Chinese Science Bulletin. However, since this journal may not be easily accessible to our readers, and further the two papers are obviously independent of each other, theBIT Editors have decided to accept the present paper.     

Multi-quark structure ofU(3.1)

We interpret the recently observedU(3.1) mesons with the \(\Lambda \bar p\) + pions decays as the bound state of \(\Lambda ,\bar p\) andX ₀(1480). TheX ₀(1480) is a mesonium with \(Q^2 \bar Q^2 \) structures observed in γγ reactions and \(\bar pn\) annihilations. With this interpretation, we can understand its decay modes. Furthermore, we predict the ratio of \(\sigma (\Lambda \bar p\pi ^ + \pi ^ - )/\sigma (\Lambda \bar p\pi ^ + \pi ^ + )\) to be ?3.1 for centrally produced events and that the width of \(U^ - (\Lambda \bar p\pi ^ + \pi ^ - )\) to be greater than that of \(U^ + (\Lambda \bar p\pi ^ + \pi ^ + )\) . Both predictions seem to be in reasonable accord with the available data. We call for the detection of the \(\Lambda \bar p\pi ^ - \pi ^ - \) mode to verify the present interpretation.     

3-(Triethoxysilyl)propionitrile sol-gel coating

3-(Triethoxysilyl)propionitrile (TESPN) sol-gel has been prepared under different conditions. It was employed for coating the surfaces of quartz and aluminum. Infrared (IR) and Raman spectra of TESPN and TESPN sol-gels have been recorded in the study of the sol-gel process. Transmission and reflection absorption IR (RAIR) spectra of TESPN sol-gel coated quartz and aluminum have also been collected for better understanding the film formation on the substrate surfaces. Spectra collected at different temperatures indicated that the silane film on quartz decomposes at 700 degrees C. Results from thermal gravimetric analysis (TGA) supported this result. Based on the group frequencies and the spectral behavior in different states, some vibrational modes were assigned to the observed bands. The anticorrosion behavior of the sol-gel coated aluminum in comparison with the uncoated metal was evaluated by measuring the potentiodynamic polarization and electrochemical impedance spectra (EIS).     

Fluorescence from the second excited singlet state of [18] annulenes

The emission spectra of the second excited singlet state of [18] annulene and of monofluoro [18] annulene (in a 3-methylpentane glass at 4 K) are reported. The large energy gap between the first and second excited singlet states inhibits fast internal conversion and favours the appearance of S₂ → S₀ emission. In addition, fluorescence from the S₁ state can be observed in monofluoro [13] annulene by exciting into the S₂ or directly into the S₁ absorption.     

氟硅烷自组装单分子膜的制备及其摩擦学性能

利用分子自组装技术制备了全氟辛酰胺丙基硅烷单分子膜,用X射线光电子能谱(XPS)对组装膜的表面元素进行了表征;接触角测试表明,该组装膜具有很好的疏水-疏油性,其对水的接触角高达105°,对正十六烷的接触角为50°.摩擦磨损实验结果表明,全氟辛酰胺丙基硅烷自组装单分子膜可以大大降低基片的摩擦系数,使载玻片的摩擦系数从0.85左右降低到0.14左右,而且低负荷下具有很好的耐磨性.     

Synthesis of a model system for the preparation of phloroglucinol containing natural products

A model system for the synthesis of phloroglucinol containing natural products was synthesized. Key steps include a manganic acetate-mediated cyclization and the facile conversion of an alkene into a β-bromoenone.     

掺杂镨的纳米二氧化钛光催化降解2,4-二硝基苯酚的研究

以钛酸丁酯为原料,用溶胶-凝胶(sol-gel)法制备了掺杂镨的纳米TiO2粉末.采用X光衍射仪对粉体的物相进行了表征.样品经500 ℃焙烧2 h后,0.5%(摩尔分数)Pr3+-TiO2纳米粉末为单一的锐钛型结构.通过粉体对2,4-二硝基苯酚的降解情况对其光催化活性进行了测试,结果表明与纯TiO2相比,Pr3+-TiO2的光催化活性有较大提高,当Pr3+的掺入量为0.5%(摩尔分数)时催化活性最高.以高压汞灯为光源,2,4-二硝基苯酚的初始浓度为50 mg·L-1,催化剂0.5%(摩尔分数)Pr3+-TiO2投加量为1.0 g·L-1时,2,4-二硝基苯酚的光催化降解效果最好.     

Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.