Rocky coast processes: with special reference to the recession of soft rock cliffs

Substantial progress in research on the recession of coastal cliffs composed of soft materials has been made in recent years and data with higher accuracy have been accumulated. This paper provides the state of the art review in the recession studies and highlights two new findings obtained from the reanalysis of existing data. The review topics are: episodic and localized nature of cliff recession; the development of cliffline; the relationship between cliff height and recession rate; mechanisms of cliff toe erosion by waves; a fundamental equation for wave-induced toe erosion; factors controlling toe erosion; and slope instabilities and mass movements. The findings are presented on (1) the temporal change in cliffline recession mode and (2) the effect of beach sediment at the cliff base on the cliff erosion.     

Direct observation of chemical oscillation at a water/nitrobenzene interface with a sodium-alkyl-sulfate system.

The oscillation of the interfacial tension and electrical potential at a water/nitrobenzene interface was observed with homologous anionic surfactant molecules, sodium-alkyl-sulfates. Concerning small molecules with a short hydrophobic carbon chain, the oscillation period and amplitude decreased with a decrease of the length of the alkyl chain. On the other hand, when surfactant molecules with a long hydrophobic carbon chain were used, no remarkable periodic oscillation occurred after the first oscillation. In all systems, an interfacial flow by Marangoni convection was observed when the oscillation took place. By monitoring the movement of carbon powder scattered on the liquid/liquid interface with a CCD camera, we could observe that the liquid/liquid interface expanded outward from the area on which the surfactant molecules adsorbed when the oscillation occurred. When the small molecule was used, the speed of expansion of the interface (flow speed) was small and shrinkage followed by expansion of the interface repeatedly occurred. However, when the large molecule was used, the flow speed was large and expansion occurred only one time. These results show that hydrodynamic factors and surface activities are important in chemical oscillation systems.     

New approaches to liquid interfaces through changes in the refractive index and nonlinear susceptibility utilizing ultrashort laser pulses.

Molecules in inhomogeneous liquid environments, such as air/liquid, liquid/liquid, solid/liquid interfaces interact with each other specifically, and sometimes form characteristic structures and emerge unique properties. Here, we introduce two newly developed spectroscopic techniques, the total-internal-reflection ultrafast transient lens method (TIR-UTL) and second harmonic generation-coherent vibrational spectroscopy (SHG-CVS), to investigate the characteristic behaviors of molecules in such inhomogeneous environments. TIR-UTL probes the refractive-index change with sub-picosecond resolution and provides information on ultrafast changes in the population, density, and thermal properties, such as temperature increase and energy transfer from the solute molecules to the surrounding solvent molecules. On the other hand, SHG-CVS probes nonlinear susceptibility changes at the interfacial areas, and is expected to provide spectroscopic information on the low-frequency vibrational modes that reflect the corrective motion of the molecules in such an inhomogeneous environment. These new approaches are based on pump-probe techniques utilizing (ultra) short laser pulses. They are expected to provide further information on inhomogeneous environments from the viewpoints of solute-solvent interactions, changes in the molecular orientation, and the corrective motion of molecules at liquid interfaces.     

VISUAL PIGMENTS—10. SPECTROSCOPY AND PHOTOPHYSICAL DYNAMICS OF RETINOL AND RETINYL ETHER

Abstract— The absorption and emission spectra, lifetimes and quantum yields of all-trans retinol have been examined as a function of solvent and temperature. In addition, the spectroscopy of retinyl ether and 2 other polyene alcohols have been determined. Based on the results obtained, we conclude that the singlet excited state of retinol and retinyl cther is of a forbidden character and of the type loosely called ¹A^-_g. Retinol forms a dimer in an alkane solvent when cooling from 298 to 77 K. A general structure for the dimer is proposed.     

A study of novel heat-resistant polymers: Preparation of photosensitive fluorinated polybenzoxazole precursors and physical properties of polybenzoxazoles derived from the precursors

A series of novel photosensitive polybenzoxazole precursors were prepared from polycondensation of 2,2-bis(3,3′-amino-4,4′-hydroxyphenyl)hexafluoropropane with photosensitive dicarboxylic acid chlorides such as p-phenylenediacryloyl chloride and benzophenone-4,4′-dicarboxylic chloride. The precursors are soluble in common organic solvents owing to the presence of perfluoromethyl groups in the chain structure, and insolubilized in the solvents on irradiation with the light. Polybenzoxazole patterns with high resolution as well as high aspect ratio were reproduced by baking the precursor patterns at 300°C. The pattern shrinkage on the conversion to polybenzoxazole was slight. The polybenzoxazole films offered good heat-resistance up to 400°C in addition to good electrical properties.     

The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

FT-IR study of the interlamellar water confined in glycolipid nanotube walls

The local hydrogen-bonding environment of water confined in glycolipid nanotubes (LNTs) was investigated by Fourier transform infrared (FT-IR) spectroscopy. Using X-ray diffraction (XRD), we estimated the thickness of an interlamellar water layer, which was confined between the bilayer membranes constructing the walls of the LNTs, to be 1.3 +/- 0.3 nm. FT-IR spectroscopic measurement of the confined water showed an obvious reduction in IR absorption in both the low-energy (around 3000 cm(-1)) and high-energy regions (around 3600 cm(-1)) of the OH stretching band as compared to bulk water. The reduction around 3000 cm(-1) indicated a decrease in the relative proportion of the water molecules with a long-range network structure due to a geometrical restriction. This agrees with the results obtained for other multilamellar systems. On the other hand, the remarkable reduction around 3600 cm(-1), which was not observed in the other systems, indicated the absence of weakly hydrogen-bonded water aggregates due to the effect of sugar headgroups.     

Photoreactive fluorinated polyimide protected by a tetrahydropyranyl group (THP) based on photo-induced acidolysis

A polyimide (6F-THP) with a tetrahydropyranyl group (THP) in its side chain has been synthesized. The THP group exhibits a high acidolysis rate in this polymer's film. This rate was faster than that of a tertbutoxycarbonyl group (t-BOC), which has been previously reported [1]. Furthermore, the deprotected fluorinated polyimide (6FDA-AHHFP) became soluble in an aqueous base due to the presence of a hydroxyl group attached to the phenyl group of the diamine segment. The polyimide thus provides high performance as a photopolymer when used in conjunction with a photoacid generator after the post-exposure baking process (PEB). The photoacid generators used in this study were p-nitrobenzyl-9,10-dimethoxyanthoracene-2-sulfonate (NBAS) and diphenyliodonium-9,10-dimethoxyanthoracene-2-sulfonate (DIAS). The quantum yields of photodissociation and photoacid generation were also measured. The photoacid-generating quantum yields closely corresponded to the photosensitivities of the photoreactive polyimide system. It was confirmed that the THP group was easily deprotected even in the 6F-THP film with p-toluenesulfonic acid as a model acid catalyst. The activation energy of the THP deprotection reaction was determined to be 12.8 kcal/mol (19.5 kcal/mol in the case of t-BOC). The relationships between the THP deprotecting rate constant (k_d) and acid molecular size and between k_d and polyimide structure were further investigated.     

Molecular structures,electronic spectra,and aromaticity of 1,6- and 1,8-dioxa analogues of pyrene and benzo[a]pyrene. Semiempirical molecular orbital calculations

The molecular structures of [1]benzopyrano[6,5,4-def][1]benzopyran, [2]benzopyrano[7,8,1,def]-1-benzopyran, 1-benzopyrano[6,5,4-mna]xanthene, and 2-benzopyrano[7,8,1-mna]xanthene have been optimized by using the PM3 semiemperical MO method. These calculated molecules have been shown to be planar. Their aromaticity has been investigated by use of the HOMA index. The molecules are found to be less aromatic than the correspolding parednt hydrocarbons, pyrene and benzo[a]pyrene. The CNDO/S MO method has been used to interpret th experimental uv-vis specrtoscopic data. The result of the PM3, CNDO/S and HOMA-index clculations are in good arteement with the experimental data.