Pressure effects in a plastic columnar discotic triphenylene

The effect of hydrostatic pressure on the structure of a plastic columnar discotic triphenylene has been investigated. The goal was to determine whether pressure can be used to modify electronic properties via changes in structural properties of columnar discotics to any significant extent. The findings are that (i) the intra- and inter-columnar distances are reduced in a nearly isotropic fashion, (ii) that the crystal sizes are reduced and (iii) that a transition takes place from a more highly ordered plastic columnar to a less ordered hexagonal columnar state with increasing pressure. The induced decrease of the molecular distances, amounting to 6% for pressures up to 17 kbar, are clearly too small to induce an appreciable modification of the electronic structure and thus opto-electronic properties.     

Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Chiroptical detection during liquid chromatography,part 5: On-line measurement of circular dichroism spectra Δε(λ) during stops of chromatographic flow

Summary A procedure is described which serves to measure circular dichrograms () on line during stops of flow in liquid chromatography. Since the concentration of substrate in the spectrometer cell during the stop is not known, the differential absorption coefficients are calculated from the experimental differential absorbances A by means of UV absorption (i. e. photomultiplier voltage) data. Verifications of the procedure are obtained by its application to three substrates (Table 1), the () spectra of which were known. The present on-line technique is compared with a corresponding off-line method.The N,N-dimethylthiobenzamides1 and2 as well as the 9,10-phenanthrenequinone7 consist of interconvertible enantiomers because their planar states are destabilized by steric overcrowding of groups. The unknown dichrograms () of1, 2 and7 are obtained (Figs. 2 and 4) and discussed with reference to the helicities of these molecules.In memory of the late Professor Dr. Dr. h. c. Günther Snatzke.     

Designed Beta‐Turn Mimic Based on the Allylic‐Strain Concept: Evaluation of Structural and Biological Features by Incorporation into a Cyclic RGD Peptide (Cyclo(‐L‐arginylglycyl‐L‐α‐aspartyl‐))

The (3R,5S,6E,8S,10R)‐11‐amino‐3,5,8,10‐tetramethylundec‐6‐enoic acid (ATUA; 1 ), which was designed as a βII′‐turn mimic according to the concepts of allylic strain and 2,4‐dimethylpentane units, was incorporated into a cyclic RGD peptide. The three‐dimensional structure of cyclo(‐RGD‐ATUA‐) (=cyclo(‐Arg‐Gly‐Asp‐ATUA‐)) 4 in H₂O was determined by NMR techniques, distance geometry calculations and molecular‐dynamics simulations. The RGD sequence of 4 shows high conformational flexibility but some preference for an extended conformation. The structural features of the RGD sequence of 4 were compared with the RGD moiety of cyclo(‐RGDfV‐) (=cyclo(‐Arg‐Gly‐Asp‐D ‐Phe‐Val‐)). In contrast to cyclo(‐RGDfV‐), which is a highly active αvβ3 antagonist and selective against αIIbβ3, cyclo(‐RGD‐ATUA‐) shows a lower activity and selectivity. The structure of the ATUA residue in the cyclic peptide resembles a βII′‐turn‐like conformation. Its middle part, adjacent to the C?C bond, strongly prefers the designed and desired structure.     

Data management in multi-method surface analysis

The solution of the problem of interchangeability of surface analytical data is gaining increasing importance in multi-method surface analysis. There are various surface analytical instruments in different laboratories on several automation levels. For these instruments, which are controlled by computer systems working with proprietary software under various operating systems, a standardised data format is necessary to allow an exchange of data. Therefore, a toolkit has been developed for the transfer, archiving and editing of surface analytical data in a standardised public domain format. This format contains all available and necessary information on experimental conditions and all parameters specific for a number of analytical techniques such as AES, SAM, XPS, SIMS, STM, AFM and EPMA. Additionally, all data concerning the conditions of sample-preparation and measurement history are included in order to allow a well-founded evaluation of the data and improved reproducibility of the experiment.     

Layer-by-layer sensor architecture of polymers and nanoparticles for electrochemical detection of uric acid in human urine samples

Excessive uric acid levels in the human body (hyperuricemia) are the main causes of kidney stones and diabetes. In this study, a layer-by-layer arrangement of polymers and nanocomposites is used as a new electrode sensing material for rapid and direct electrochemical determination of uric acid (UA). The electrode surface architecture was constructed by the incorporation of poly (amidoamine) dendrimer with 0.5 generation (poly (amidoamine) [PAMAM] [D-G0.5]) of multiwalled carbon nanotube-silver nanoparticles (MWCNT-AgNP) and a poly (neutral-red) (poly [NR]) polymer. The PAMAM (D-G0.5)/MWCNT-AgNP/poly (NR)-coated electrode has a good electrocatalytic activity for the determination of UA using cyclic voltammetry and showed remarkable enhancement in current response at a low-oxidation potential (0.3 V). Under optimal conditions, the developed electrochemical sensor showed an excellent and wide linear range for the determination of UA (i.e. 0.016 μM–2500 μM), and the limit of detection was found to be 0.005 μM. The modified sensor system demonstrated excellent sensitivity and selectivity toward the detection of UA in the presence of interfering substances, which are commonly found in urine and human fluid samples. Furthermore, the developed sensor has represented both reproducibility and excellent stability for the UA determination in real samples (human urine).     

Search for new heavy particles in the WZ0 final state in pp collisions at square root[s] = 1.8 TeV

We present the first general search for new heavy particles, X, which decay via X --> WZ0 --> e(nu)+jj as a function of M(X) and Gamma(X) in pp collisions at square root[s] = 1.8 TeV. No evidence is found for production of X in 110 pb(-1) of data collected by the Collider Detector at Fermilab. General cross section limits are set at the 95% C.L. as a function of mass and width of the new particle. The results are further interpreted as mass limits on the production of new heavy charged vector bosons which decay via W' --> WZ0 in an extended gauge model as a function of the width, Gamma(W'), and mixing factor between the W' and the standard model W bosons.