Manganese(II) o ctacyanotungstate(V)-based magnet containing a noncoordinated aromatic molecule

We have prepared a pillared layer magnetic material containing a noncoordinated aromatic molecule, [{MnII(pyrimidine)(H2O)}2{MnII(H2O)2}{WV(CN)8}2](pyrimidine)2.2H2O. This compound has one-dimensional channels (6.2 x 2.1 A) that are occupied by noncoordinated pyrimidine. The magnetization versus temperature plots showed the magnetic phased transition temperature (TC) was 47 K. The magnetization versus external magnetic field plots showed that the saturation magnetization (MS) value was 13.0 muB at 2 K. This MS value indicates that an antiferromagnetic interaction operates between the WV (S = 1/2) and MnII (S = 5/2) ions. The magnetic hysteresis loop showed that the coercive field (HC) was 17 G at 2 K.     

Supersonic jet fluorescence spectrometry of perylene and benzo[a]pyrene

A supersonic jet instrument for fluorescence spectrometry is described. It consists of a high-temperature free expansion nozzle for continuous sample introduction and a vacuum chamber equipped with a high-speed pumping system. Rotationally cooled spectra obtained with the supersonic jet are compared with gas-phase spectra measured at high temperature for perylene and benzo[a]pyrene molecules. Each component of the unresolved band structure in the high-temperature spectra was found to be composed of a rotational congestion of several vibrational bands. For a 1:1 mixture of perylene and benzo[a]pyrene, selective detection is possible by using supersonic jet spectrometry. The detection limit for perylene is 100 ng. The advantage of this technique over other low-temperature spectrometric methods based on Shpol'skii and matrix isolation effects are discussed.     

Low temperature properties of acetonitrile confined in MCM-41

The effect of confinement on the phase changes and dynamics of acetonitrile in mesoporous MCM-41 was studied by use of adsorption, FT-IR, DSC, and quasi-elastic neutron scattering (QENS) measurements. Acetonitrile molecules in a monolayer interact strongly with surface hydroxyls to be registered and perturb the triple bond in the C[triple bond]N group. Adsorbed molecules above the monolayer through to the central part of the cylindrical pores are capillary condensed molecules (cc-acetonitrile), but they do not show the hysteresis loop in adsorption-desorption isotherms, i.e., second order capillary condensation. FT-IR measurements indicated that the condensed phase is very similar to the bulk liquid. The cc-acetonitrile freezes at temperatures that depend on the pore size of the MCM-41 down to 29.1 A (C14), below which it is not frozen. In addition, phase changes between alpha-type and beta-type acetonitriles were observed below the melting points. Application of the Gibbs-Thomson equation, assuming the unfrozen layer thickness to be 0.7 nm, gave the interface free energy differences between the interfaces, i.e., Deltagamma(l/alpha) = 22.4 mJ m(-2) for the liquid/pore surface (ps) and alpha-type/ps, and Deltagamma(alpha/beta) = 3.17 mJ m(-2) for alpha-type/ps and beta-type/ps, respectively. QENS experiments substantiate the differing behaviors of monolayer acetonitrile and cc-acetonitrile. The monolayer acetonitrile molecules are anchored so as not to translate. The two Lorentzian analysis of QENS spectra for cc-acetonitriles showed translational motion but markedly slowed. However, the activation energy for cc-acetonitrile in MCM-41 (C18) is 7.0 kJ mol(-1) compared to the bulk value of 12.7 kJ mol(-1). The relaxation times for tumbling rotational diffusion of cc-acetonitrile are similar to bulk values.     

Photoelectron kinetic energy dependence in near threshold ionization of NO from A state studied by time-resolved photoelectron imaging

Photoelectron angular distributions in the laboratory frame (LF-PADs) from the A((2)sigma(+)) state of NO molecule were measured by femtosecond time-resolved photoelectron imaging with (1 + 1(')) resonance enhanced multiphoton ionization via the A state. High-precision measurements of the anisotropy parameters of LF-PADs were performed for the photoelectron kinetic energy from 0.03 to 1.05 eV as a function of the pump-probe delay time. The revival feature of the rotational wave packet on the A state was clearly observed in the time dependence of the photoelectron anisotropy parameters. By approximating the phase shifts of the photoelectron partial waves by the quantum defects in the high-lying Rydberg states using the multichannel quantum defect theory, the energy-dependent photoionization transition dipole moments were determined, for the first time, from time-dependent LF-PADs measured by time-resolved photoelectron spectroscopy.     

C-S bond cleavage of pyridine-2-thiol: a new functionality of quadruply bridged dinuclear platinum and palladium complexes

Treatment of pyridine-2-thiol (pytH) with H(2) (60 atm) in the presence of 5-methylpyridine-2-thiolate (5-mpyt)-bridged dinuclear Pt(III), Pt(II), or Pd(II) complexes (1 mol %) in DMF at 150 degrees C for 72 h leads to the formation of pyridine in 3-51% yield. From the (1)H NMR study of the exchange reactions and of the products under D(2) pressure, it is suggested that the catalytic reaction involves bimetallic activation of the pyt ligand followed by the liberation of pyridine and H(2)S.     

Influence of Sn on the hydration of tricalcium aluminate, Ca3Al2O6

Tricalcium aluminate (Ca₃Al₂O₆, C₃A) containing 0?C5% of Sn was synthesized by solid-state method, and the products were characterized by XRD technique. Differential thermo-analytical technique (DTA) along with X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) were applied to study the hydration behaviour of different C₃A samples with and without the presence of gypsum. Results indicate that C₃A can accommodate small amount of Sn in its structure and remaining amount forms SnO₂. Hydration studies of the synthesized C₃A shows that the additions of 0.5 and 1% Sn increase and 2% Sn decrease the reactivity of C₃A at the initial period (<3?h) of hydration. Increasing additions of Sn also increase the amounts of amorphous phases and hexagonal calcium aluminate hydrates in the cement pastes. The stabilities of these hydration products also increase with increasing content of Sn in C₃A at the experimental conditions. The presence of Sn significantly changes the hydration of C₃A and gypsum solid mixture at the initial period of hydration by enhancing the formation of more amounts of AFt and AFm phases. However, at the later stage of hydration (on or after 3?days), the hydration products in C₃A and gypsum pastes with and without the presence of Sn are almost similar.     

Chemoenzymatic synthesis of (2S,3S,4S)-form, the physiologically active stereoisomer of dehydroxymethylepoxyquinomicin (DHMEQ), a potent inhibitor on NF-κB

A new route for (2S,3S,4S)-form, the physiologically active stereoisomer of dehydroxymethylepoxyquinomicin (DHMEQ), a potent NF-κB inhibitor, was established by chemoenzymatic approach. Elaboration on the asymmetric epoxidation of a p-benzoquinone monoketal with benzylcinchonidinium tert-butylhydroperoxide yielded an epoxyenone, in 79.8% ee and 57% yield in reproducible manner. By way of the transformation of this key intermediate to enantiomerically pure (2S,3S,4S)-DHMEQ, the contaminating undesired enantiomer could be effectively removed by applying Burkholderia cepacia lipase-catalyzed hydrolysis of diacylated precursor. The above integrated combination of chemical asymmetric synthesis and enzyme-catalyzed kinetic resolution enabled us to prepare active DHMEQ in a large-scale.     

A molecular dynamics simulation of a homogeneous organic-inorganic hybrid silica membrane

A new molecular dynamics simulation method was successfully applied to construct a homogeneous organic-inorganic hybrid silica membrane using the hybrid-pcff (h-pcff) potential function. Analysis suggested that the hybrid BTESE silica membrane provided a looser network and larger cavity size for the enhancement of gas permeability and selectivity.