Third-order nonlinear optical properties of azo dye attached polymers

Third-order nonlinear optical properties of a disazo dye attached polymer (3R) were evaluated and compared with that of a monoazo (Disperse Red 1) dye attached polymer (2R). The third-order nonlinear optical coefficient (ξ⁽³⁾) of the 3R is more than three times higher than that of the 2R over the fundamental wavelengths between 1.5 and 2.0 μm. This is explained by π-conjugation elongation. For both polymers, the ξ⁽³⁾ dependence on the fundamental wavelength corresponds to their absorption spectra. This is attributable to a three-photon resonance effect. At the 1.50 μm resonant wavelength, the maximum ξ⁽³⁾ of 4.8 × 10^-11 esu is obtained for 3R at a dye content of 17 mol%.     

Operating characteristics of near-infrared self-assembled polymer microlasers

We report near-infrared laser emission from self-assembled luminescent polymer microcavities. The microrings are formed around silica optical fibers of varying diameters (80, 125, and 200 microm) and are shown to exhibit photopumped lasing at approximately 820 nm. The microrings with 200 mum inner diameter have an overall quality factor of approximately 2 x 10(3), which is limited by surface roughness and scattering. We illustrate how the laser threshold varies inversely with both the quality factor and the diameter of the microrings. The free spectral range and the intensity variation of the laser output are also presented.     

Fluorination of double-walled carbon nanotubes

Fluorine atoms are selectively attached to the sidewall of the outer shell of DWNTs without disrupting the double-layered morphology; the stoichiometry of the fluorinated DWNTs is CF(0.30).     

Nucleophilic aromatic substitution using Et3SiH/cat. t-Bu-P4 as a system for nucleophile activation

A novel type of deprotonative arylation of nucleophiles was conducted using Et(3)SiH/cat. t-Bu-P4 and the powerful S(N)Ar reactions of aryl fluorides were accomplished using alcohols and malonates as nucleophiles.     

The desalination of a mixed solution of an amino acid and an inorganic salt by means of electrodialysis with charge-mosaic membranes

A new electrodialysis with charge-mosaic membranes was proposed to achieve efficient desalination of a mixed solution of an amino acid and an inorganic salt. For such a mixed solution, the conventional electrodialytic desalination with both cation-and anion-exchange membranes had resulted in a considerable loss of the amino acid through the membranes. In this method, however, the amino acid in the desalination channel of the electrodialyzer migrates away from the membranes so that the permeation loss of the amino acid through the membrane can be prevented.

Batchwise desalination experiments by this method were carried out with a glutamic acid or arginine solution including NaCl under the condition of constant electric current density. Similar experiments by the conventional method were also carried out. As a result of comparing both methods, the amino acid loss in this method became much smaller than that in the conventional one. It was confirmed that this method was very useful for the desalination of an amino acid solution. The effects of operating conditions on the desalination process are also discussed.     

Determination of antihyperglycemic biguanides in serum and urine using an ion-pair solid-phase extraction technique followed by HPLC-UV on a pentafluorophenylpropyl column and on an octadecyl column

An HPLC-UV method was established for the determination of metformin and buformin in biological fluids. Metformin was not retained on particles packed in conventional solid-phase extraction cartridges; in contrast, buformin was retained too firmly and not eluted with a solvent for recovery. However, both drugs were retained on particles that had been treated with an ion-pair reagent of heptanesulfonate or dodecylsulfate and recovered almost completely. The recovered fraction was subjected to HPLC on a pentafluorophenylpropyl column which was suitable for the determination of both biguanides in serum and in urine. Limits of quantitation were low enough for clinical use, and reproducibility was high with an RSD of 0.9-2.3%. HPLC on a conventional octadecyl column was suitable only for the determination of buformin in serum since interfering peaks appeared on the chromatograms of urine samples. The method was applied to analysis of some clinical specimens.     

Kinetics of ultrasonic degradation of phenol in the presence of TiO2 particles

The degradation of phenol by ultrasonic irradiation in the presence of TiO2 was investigated in complete darkness. The effects of amount of TiO2 and the combination of TiO2 addition with gas (air or oxygen) supply on the degradation kinetics of phenol and the formation of the reaction products were examined. The degradation rate of phenol increased with the amount of TiO2. As the dissolved oxygen concentration increased by supplying oxygen, the degradation rate of phenol also increased. A kinetic model for the disappearance of phenol was proposed. The model takes into account the OH radical formation by direct water degradation, indirect degradation by oxygen atom and indirect degradation by TiO2 catalysis. The calculated results explained well the fact that a higher amount of TiO2 and dissolved oxygen concentration gave faster disappearance rate.     

Synthesis of multivariate random vibration systems: A two-stage least squares AR-MA model approach

A parametric time series model procedure for the synthesis of multivariate stationary time series random vibrations is shown. The vibrations are assumed to be the outputs of a regularly sampled, random noise excited, differential equation model of a vivration system. The procedure is a two-stage least squares method for realizing a multivariate disrcrete time mixed autoregressive-moving average (AR-MA) model from a given stationary process matrix covariance function. The synthesis procedure and the problem of the minimal representation of multivariate output systems and the overparameterization of AR-MA models are discussed and illustrated.     

Rayleigh scattering study and particle density determination of a high refractive index TiO2 nanohybrid polymer

We have experimentally carried out a Rayleigh scattering study of a high refractive index TiO(2) nanohybrid polymer. By employing the Rayleigh scattering technique with at least three different wavelengths, we can obtain the Rayleigh ratio of the TiO(2) nanohybrid polymer at each utilized wavelength. These measured Rayleigh ratios are then used to estimate the size of the nanoparticle and determine the number of nanoparticles per unit volume or particle density. Furthermore, this technique can be used to evaluate the dominant size of nanoparticles in the nanohybrid polymer mainly contributed to Rayleigh scattering.     

Polymer saturable absorber materials in the 1.5 microm band using poly-methyl-methacrylate and polystyrene with single-wall carbon nanotubes and their application to a femtosecond laser

We report saturable absorber materials in the 1.5 microm band that consist of poly-methyl-methacrylate (PMMA) and polystyrene (PS) polymers with single-wall carbon nanotubes (SWNTs). A very uniform dispersion of SWNT in PMMA and PS polymers has been realized by using chlorobenzene or tetrahydrofuran as a dispersion solvent. These materials, which are as thick as 1 mm, are easily optically polished on both surfaces. This was difficult to achieve with previous thin-film materials. By incorporating PMMA/SWNT as a saturable absorber, a 171 fs pulse is successfully generated in a passively mode-locked fiber laser.