Formation of cerium titanate,CeTi<Subscript>2</Subscript>O<Subscript>6</Subscript>, in sol–gel films studied by XRD and FAR infrared spectroscopy

The process of formation of cerium titanate films as a function of annealing temperature and composition has been studied by combining X-ray diffraction analysis and far infrared spectroscopy. The films have been prepared by a sol–gel synthesis using metal chlorides as precursors; the synthesis allows obtaining cerium titanate films upon annealing in air. A brannerite type, CeTi₂O₆, phase has been identified by X-ray diffraction and Rietveld analysis on thin films. CeTi₂O₆ is formed upon annealing at 700 °C and in a limited range of ceria-titania mixed compositions. The far infrared spectra are useful to observe the formation of crystalline phases at the beginning of the crystallization process at lower firing temperatures, when the XRD analysis is not enough sensitive.     

In-situ study of sol–gel processing by time-resolved infrared spectroscopy

Sol–gel processing of thin films involves time dependent phenomena which are basically driven by solvent evaporation. An example is evaporation induced self-assembly that is used to prepare mesoporous ordered films through self-organization of templating micelles. The possibility to follow in situ as a function of time the evolution of the system can give a better knowledge of the process and the physics and chemistry beneath. Time-resolved infrared techniques have been applied to different sol–gel systems to study time-dependent phenomena, in particular rapid scan time resolved infrared spectroscopy has been used to monitor in situ the process and as a tool to design the sol–gel synthesis.     

Time-resolved infrared spectroscopy as an in situ tool to study the kinetics during self-assembly of mesostructured films

Rapid scan time-resolved infrared spectroscopy has been used to investigate in situ the kinetics of the chemical processes involved in the formation of self-assembled mesostructured films. The experiments have been done in transmission mode on films cast on a diamond disk using an infrared microscope. Two specific materials have been studied: silica and titania mesoporous films templated by a triblock copolymer surfactant (Pluronic F-127). The time dependence of solvent evaporation and condensation of the chemical species have been clearly observed. Different stages in the film formation have been identified, which support well the general theory of self-assembly. The in situ FTIR spectroscopy using time-resolved rapid scan has proven to be a very effective tool for in situ analysis of film formation from a liquid phase.     

Blue-emitting mesoporous films prepared via incorporation of luminescent Schiff base zinc(II) complex

Highly fluorescent materials have been prepared by incorporation of a zinc complex in mesoporous silica thin films with ordered pore structure. The zinc complex has been introduced into the mesoporous materials via impregnation in an ethanol solution. The incorporation into the films has been monitored by UV–Vis, Fourier transform infrared spectroscopy and spectroscopic ellipsometry. After 18 h of immersion in the doping solution the films showed strong blue emission, increase in the refractive index. Leaching experiments performed by immersing the samples in ethanol or tetrahydrofuran have shown that the chromophore is retained in the porous matrix.

Design of hybrid organic–inorganic materials through their structure control: The case of epoxy bearing alkoxides

Hybrid organic–inorganic materials from (3-glycidoxypropyl)methyldiethoxysilane (GPMD) and [3-(2-aminoethyl)aminopropyl]trimethoxysilane (AEAPTMS) have been synthesized. The structure of the hybrid material has been studied as a function of AEAPTMS content by a combination of vibrational and nuclear magnetic resonance spectroscopies. The amine groups in AEAPTMS have shown to be very effective epoxy curing agents and the degree of condensation inside the hybrid material can be finely tuned with the amount of AEAPTMS. Fourier transform near infrared spectroscopy coupled with 2D infrared analysis has been used to elucidate the role of amines in epoxy curing. Several reactions of the amines with the epoxies have been observed, via tertiary, secondary and primary amines. At low AEAPTMS contents the hybrid material exhibits a residual mobility of the organic species, as revealed by solid state NMR spectroscopy. This property has been evaluated comparing qualitatively the residual mobility in hybrid materials synthesized with different types of organically modified alkoxides containing epoxy functional groups.     

Densification of sol–gel silica thin films induced by hard X‐rays generated by synchrotron radiation

In this article the effects induced by exposure of sol–gel thin films to hard X‐rays have been studied. Thin films of silica and hybrid organic–inorganic silica have been prepared via dip‐coating and the materials were exposed immediately after preparation to an intense source of light of several keV generated by a synchrotron source. The samples were exposed to increasing doses and the effects of the radiation have been evaluated by Fourier transform infrared spectroscopy, spectroscopic ellipsometry and atomic force microscopy. The X‐ray beam induces a significant densification on the silica films without producing any degradation such as cracks, flaws or delamination at the interface. The densification is accompanied by a decrease in thickness and an increase in refractive index both in the pure silica and in the hybrid films. The effect on the hybrid material is to induce densification through reaction of silanol groups but also removal of the organic groups, which are covalently bonded to silicon via Si—C bonds. At the highest exposure dose the removal of the organic groups is complete and the film becomes pure silica. Hard X‐rays can be used as an efficient and direct writing tool to pattern coating layers of different types of compositions.     

Formation of hybrid nano-crystals in organic–inorganic films from a basic sol

Organic–inorganic films containing hybrid nanocrystals have been prepared by sol–gel processing in controlled conditions. We have systematically changed the temperature and the aging time of a precursor sol containing an organically modified alkoxide bearing an epoxy group, 3-glycidoxypropyltrimethoxysilane, to obtain a controlled crystallization of hybrid layered structures in hybrid films. The precursor sol has been aged at different temperatures, from 5 to 60 °C, and for 1, 2 or 3 days; the films have been deposited from the aged sol and immediately after characterized by X-ray diffraction, Fourier transform infrared spectroscopy and Raman spectroscopy. We have observed that the formation of the hybrid crystals can be obtained only when at least 50% of the epoxies are opened and a larger silica condensation is achieved. These conditions are reached after aging at 60 °C for 1 day, or at longer aging times when the sol is aged at lower temperatures. Transmission electron microscopy and optical polarized images have confirmed the formation of the hybrid crystals.     

Evaporation of ethanol and ethanol-water mixtures studied by time-resolved infrared spectroscopy

The knowledge of the physics and the chemistry behind the evaporation of solvents is very important for the development of several technologies, especially in the fabrication of thin films from liquid phase and the organization of nanostructures by evaporation-induced self-assembly. Ethanol, in particular, is one of the most common solvents in sol-gel and evaporation-induced self-assembly processing of thin films, and a detailed understanding of its role during these processes is of fundamental importance. Rapid scan time-resolved infrared spectroscopy has been applied to study in situ the evaporation of ethanol and ethanol-water droplets on a ZnSe substrate. Whereas the evaporation rate of ethanol remains constant during the process, water is adsorbed by the ethanol droplet from the external environment and evaporates in three stages that are characterized by different evaporation rates. The adsorption and evaporation process of water in an ethanol droplet has been observed to follow a complex behavior: due to this reason, it has been analyzed by two-dimensional infrared correlation. Three different components in the water bending band have been resolved.     

Thermal stability of lysozyme Langmuir-Schaefer films by FTIR spectroscopy

Fourier transform infrared spectroscopy has been applied to study the thermal stability of multilayer Langmuir-Schaefer (LS) films of lysozyme deposited on silicon substrates. The study has confirmed previous structural findings that the LS protein films have a high thermal stability that is extended in a lysozyme multilayer up to 200 degrees C. 2D infrared analysis has been used here to identify the correlated molecular species during thermal denaturation. Asynchronous 2D spectra have shown that the two components of water, fully and not fully hydrogen bonded, in the high-wavenumber range (2800-3600 cm-1) are negatively correlated with the amine stretching band at 3300 cm-1. On the grounds of the 2D spectra the FTIR spectra have been deconvoluted using three main components, two for water and one for the amine. This analysis has shown that, at the first drying stage, up to 100 degrees C, only the water that is not fully hydrogen bonded is removed. Moreover, the amine intensity band does not change up to 200 degrees C, the temperature at which the structural stability of the multilayer lysozyme films ceases.     

Hafnia sol-gel films synthesized from HfCl4: Changes of structure and properties with the firing temperature

Thin sol-gel hafnia films have been synthesised from HfCl₄, the synthesis has revealed to be a simple route to fabrication of hafnia films with high transparency in the UV-visible range. The films have been fired at different temperatures in air up to 1000°C and have been characterized by X-ray diffraction and Fourier transform infrared spectroscopy. Infrared absorption spectra of hafnia films have allowed to follow the formation of monoclinic crystalline phases together with XRD. Formation of monoclinic hafnia crystallites has been observed upon calcination at temperatures higher than 600°C, as shown by infrared spectroscopy and XRD. The optical transmission and the refractive index as a function of the temperature of firing have been characterized by UV-Visible spectroscopy and spectroscopic ellipsometry. The hafnia films, after firing at 600°C, had a refractive index of 1.92 with a thickness of around 70 nm.