Altered expression of polyhydroxyalkanoate synthase gene and its effect on poly[(R)-3-hydroxybutyrate] synthesis in recombinant Escherichia coli

Polyhydroxyalkanoate (PHA) synthase (PhaC) from Wautersia eutropha was expressed in a wide range of production level in Escherichia coli XL1-Blue cells and its effects on PhaC activity, poly[(R)-3-hydroxybutyrate] [P(3HB)] production and its molecular weights were investigated. The production level of PhaC was controlled both by the amount of chemical inducer (isopropyl-β-d-thiogalactopyranoside, IPTG) added into the medium and the use of different copy number of plasmids. In a flask experiment, as PhaC production level in the cells increased, the PhaC activity also increased in the range of low PhaC concentration. However, PhaC activity did not further increase in the range of high PhaC concentration, probably due to the formation of inclusion body in the cells. The molecular weight of P(3HB) was found to decrease with increasing PhaC activity. This trend was also verified in high cell density cultivation using 10-l jar fermentor. Furthermore, we demonstrated that the use of low copy number plasmid and appropriate induction of PhaC expression were effective in achieving both high productivity and high molecular weight of P(3HB).     

Dynamic headspace analysis of trace volatile components in polymeric materials by wide bore capillary gas chromatography

A novel dynamic headspace gas chromatographic system equipped with a wide bore capillary column was constructed for direct analysis of less volatile components in polymeric materials such as coating paints. With this system, the determination of typical paint additives such as hindered amine light stabilizers and ultraviolet absorbers could be carried out within a short time.     

Analysis of free fatty acids by a micro-liquid chromatograph directly coupled with a mass spectrometer through a vacuum nebulizing interface

A liquid chromatograph directly coupled with a quadrupole mass spectrometer through a vacuum nebulizing interface was applied to the analysis of various free fatty acids. Chemical ionization mass spectra of the C₇? C₂₂ free fatty acids were first examined using either methanol or benzene as the reagents. Then the practical compositional analysis of the fatty acids were performed with various biological samples such as bean oil, rape oil, palm oil and milk fat where most of the fatty acids are included as their triglycerides.     

Chemo-enzymatic Synthesis of Novel Oligo-N-acetyllactosamine Derivatives having a β(1-4)–β(1-6) Repeating Unit by Using Transition State Analogue Substrate

Chitinase-catalyzed hydrolytic and transglycosylating behavior of 1,2-oxazoline derivative of N-acetyllactosamine (LacNAc-oxa) 1 has been investigated. An extremely rapid hydrolysis (ring-opening of the oxazoline moiety) could be observed, suggesting that 1 behaves as a transition state analogue substrate for chitinase A1 (Bacillus circulans WL-12). This disaccharide monomer 1 was found to polymerize under basic conditions, giving rise to novel oligosaccharides having a β(1-4)–β(1-6) repeating unit in the main chain. The degree of polymerization of the resulting oligosaccharides was up to 5. This is the first example of enzymatic glycosylation reaction forming a β(1-6) bond catalyzed by chitinase.     

Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis, properties, and crystal structure of a novel anthracene-bridged molybdenum-zinc porphyrin dimer

The synthesis and properties of novel anthracene-bridged porphyrin dimers having an oxomolybdenum(V) porphyrin unit, H(2)(DPA)[Mo(V)O(OMe)] (1) and (DPA)[Mo(V)O(OMe)][Zn(II)(MeOH)] (2), and the relevant monomer porphyrin complexes Mo(V)O(MPP)OMe (3) and Zn(II)(MPP) (4) are presented. An oxomolybdenum(V) unit was introduced into one of the two porphyrins in DPA to give 1, which has a free-base porphyrin unit. By introducing a zinc(II) ion to the free-base part, a mixed-metal complex of 2 was prepared and isolated. The structure of 2 was analyzed by X-ray crystallography (2.(7)/(6)CH(2)Cl(2), triclinic, P(-)1 (no. 2), a = 15.2854(12) A, b = 19.9640(15) A, c = 13.6915(12) A, alpha = 90.968(3), beta = 113.108(4), gamma = 96.501(4), Z = 2, R1 = 9.9, wR2 = 19.2). The structure of 2 demonstrated that a methanol is stably coordinated to the Zn(II) ion with the aid of a hydrogen bond to the methoxo ligand on the Mo(V) ion in the binding pocket of DPA. The electrochemical measurements of 2 suggested that the methanol was kept in the pocket of DPA in solution even at the reduced state of the molybdenum ion.     

Determination of trace inpurities high-purity aluminum oxide by inductively-coupled plasma atomic emission-spectrometry

Trace impurities (Ca, Cu, Fe, Mg, Mn, Na and Si) in 99.99% aluminum oxide were determined by inductively-coupled plasma atomic emission spectrometry (i.c.p./a.e.s.). The sample was fused with lithium carbonate/boric acid to determine Ca, Cu, Mg, Mn, Na and Si or dissolved in phosphoric/sulphuric acids to determine iron. Matrix effects on the calibration graphs for each element were studied: for accurate determinations, calibration solutions must contain lithium and boric acid (or aluminium and phosphoric and sulphuric acids for iron).     

Salt effects in the base-catalyzed polymerization of unsaturated amide compounds. II. Polymerization of p-vinylbenzamide and acrylamide

In the presence of a variety of inorganic salts, p-vinylbenzamide underwent vinyl-type polymerization by anionic initiators to form the polystyrene derivative, whereas in dimethyl sulfoxide as solvent the aromatic polyamide was always obtained through a proton-transfer mechanism regardless of the presence of the salts. In the presence of of the salts, acrylamide is generally polymerized to the polyamide through a proton transfer reaction.     

Generation of functionalized asymmetric benzynes with TMP-zincates. Effects of ligands on selectivity and reactivity of zincates

We have developed new methods for preparing functionalized benzynes through deprotonative zincation as a key reaction using R2Zn(TMP)Li, and we also describes dramatic ligand effects on the benzyne formation. Deprotonative zincation of various meta-substituted bromobenzenes with Me2Zn(TMP)Li proved effective for the one-pot generation of various 3-functionalized benzynes, particularly those electrophilic substituents such as ester, amide, and cyano. On the other hand, zincation with tBu2Zn(TMP)Li, followed by electrophilic trapping (with I2) proved a powerful tool for the preparation of 1,2,3-trisubstituted aromatic compounds.8 The resultant 1,2,3-trisubstituted benzenes are available as precursors for generation of 3-substituted benzynes by halogen-zinc exchange reactions with Me3ZnLi. These methods offer far greater generality than previous methods for the synthesis of functionalized asymmetric benzynes, and should be of value in new syntheses of various natural products and functional materials. In addition, these results underline the utility of spectator ligands on the central metal of ate complexes as a tunable functionality in the development of new ate complex-promoted reactions.     

Effect of cholesterol or phospholipid incorporation on the chemical stability of the muramyldpeptide derivative B30-MDP in mixed vesicles

Application of the muramyldipeptide derivative B30-MDP to liposomal vaccines will aid in the development of improved high immunogenicity vaccines. To give full play to the effectiveness of B30-MDP as a liposomal vaccine, it is important to evaluate the effect of cholesterol, dimyristoylphosphatidylcholine (DMPC) or distearoylphosphatidylcholine (DSPC) incorporation on the chemical stability of B30-MDP and physicochemical properties of B30-MDP/lipid mixed vesicles from the view point of pharmaceutics.The observed degradation rate constants of B30-MDP by hydrolysis in B30-MDP/cholesterol mixed vesicles were increased with increasing concentration of cholesterol, however, those in B30-MDP/DMPC and B30-MDP/DSPC mixed vesicles were unchanged with increasing concentration of DMPC and DSPC. The degradation behavior of B30-MDP was then compared with physicochemical properties of B30-MDP/lipid mixed vesicles, such as membrane fluidity and particle size. It was apparent that the degradation of B30-MDP in B30-MDP/cholesterol mixed vesicles was influenced by the particle size, but not by the fluidity of the membranes. In the case of B30-MDP/phospholipid mixed vesicles, MDP/phospholipid mixed vesicles, the degradation of B30-MDP was not influenced by either the membranes' fluidity or the particle size of the mixed vesicles.It is considered that the degradation of B30-MDP in the mixed vesicles is dependent on the membrane state, and the addition of cholesterol to B30-MDP vesicle inhibits the mutual interaction of MDP regions, whereas the addition of phospholipids hardly influences the mutual interaction of MDP regions, possibly owing to phase separation between B30-MDP and phospholipids.