Synthesis of fish scale derived hydroxyapatite silica propyl bis aminoethoxy ethane cuprous complex (HASPBAEECC) as a novel hybrid nano-catalyst for highly efficient synthesis of new benzimidazole-1,2,3-triazole hybrid analogues as antifungal agents

Molecular Diversity - The preparation, characterization and application of hydroxyapatite silica propyl bis aminoethoxy ethane cuprous complex (HASPBAEECC) as a novel hybrid nano-catalyst for...     

A Method for the Acetylation of Alcohols Catalyzed by Heteropolyoxometallates

Summary. Esterifications of acetic acid with some linear, secondary, tertiary, and benzylic alcohols mediated by catalytic amounts of Keggin, Wells–Dawson, and Preyssler type heteropolyacids were carried out under reflux at mild reaction conditions with good to excellent yields. Among the examined catalysts, H₃PW₁₂O₄₀ and H₁₄NaP₅W₃₀O₁₁₀ revealed better results than other heteropolyacids. This work was performed with the aim of simplifying the esterification process by omitting any solvents and mineral acid catalysts. Easy work-up, low cost, and acidic waste reduction, which are all important features from the environmental and economical points of view, are distinct aspects of this protocol. Heteropolyacid catalysts could be separated after a simple work-up and reused for several times.     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

A Simple and Highly Efficient One-Pot Procedure for the Synthesis of Amides via Beckmann Rearrangements Using 1-Tosylimidazole (TsIm)

A facile and highly efficient method for one-pot Beckmann rearrangement of ketoximes into N-substituted amides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, ketoximes are refluxed with TsIm and Cs₂CO₃ in the presence of SiO₂ as a recyclable catalyst in DMF affording the corresponding amides in high yields. This methodology is highly efficient and regioselective for various structurally diverse ketoximes including symmetrical and unsymmetrical as well as cyclic oximes. The results of quantum mechanical studies used to rationalize the experimental outcomes are discussed.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Simple and Highly Efficient Procedure for Conversion of Aldoximes to Nitriles Using N-(p-Toluenesulfonyl) Imidazole

A facile and efficient method for dehydration of aldoximes into nitriles using N-(p-toluenesulfonyl) imidazole (TsIm) is described. In this method, aldoximes were refluxed with TsIm in the presence of 1,8-diazabicyclo-[5.4.0]undec-7-ene (DBU) in dimethylformamide (DMF) to afford the corresponding nitriles in good yields. This methodology is highly efficient for various structurally diverse aldoximes including aromatic, heteroaromatic, and aliphatic oximes. A plausible mechanism for the conversion of aldoxime into nitriles using TsIm/DBU is explained.     

Synthesis,characterization and theoretical evaluations of HMDS promoted chemoselective O-alkylation of uracils

The sodium salts of the conjugated bases of uracils undergo highly chemoselective O⁴-monoalkylation when treated with various alkyl halides in dry DMF, while the use of methyl iodide results in N¹+N³-dimethylation. Theoretical evaluations of the chemo- and regioselectivity along with X-ray crystallographic data are presented.     

Synthesis of titanium dioxide nano-powder via sol–gel method at ambient temperature

Titanium dioxide is a semiconductor with excellent photo catalytic properties and an important material with high regarded in nanotechnology. In this study, titanium dioxide nanoparticles was successfully synthesized via sol–gel method using tetra-n-butyl orthotitanate, hydrochloric acid and ammonia. Tetra-n-butyl orthotitanate was used as precursor. The ingredients were mixed at ambient temperature for 9 h on a magnetic stirring, sol was formed and converted to gel by adding ammonia. X-ray diffraction analysis clearly showed anatase and rutile phases so that, with increasing calcination temperature anatase converts to the rutile. Scanning electron microscopy was used for agglomerate observations. Energy-dispersive detector analysis was carried out and confirmed the formation of titanium dioxide. The influences of calcination temperature and pH value on particles size were studied. The results indicate that synthesis at room temperature reduced the particle size to 15 nm.     

Preclinical evaluation of 188 Re-HYNIC-PSMA as a novel therapeutic agent

Journal of Radioanalytical and Nuclear Chemistry - In this study, optimized preparation, quality control, cell assessments and biostribution of 188Re-HYNIC-PSMA in normal rats and tumor bearing...     

Effect of self-fields on the electron cyclotron maser instability in a dielectric loaded waveguide

The influence of self-fields on the cyclotron maser instability in a hollow electron beam propagating parallel to a uniform axial magnetic field B ₀ ê _z in a dielectric loaded waveguide is investigated. The theoretical analysis is carried out within the framework of linearized Vlasov-Maxwell equations. It is assumed that the beam is thin with the radial thickness much smaller than the beam radius. A new dispersion relation for azimuthally symmetric electromagnetic perturbation is derived and analyzed numerically. The influence of self-fields on the cyclotron maser instability in a dielectric loaded waveguide for different dielectric medium is studied. It is found that unlike the hollow waveguide the growth rate is increased by increasing self-fields. The instability band width decreases due to the increasing self-fields. The maximum growth rate increases gradually as self-fields increase as regards a different dielectric medium.