Detection of bilayer packing stress and its release in lamellar-cubic phase transition by time-resolved fluorescence anisotropy

An introduction of nonlamellar-forming lipids into planar bilayers generates packing stress, which is important for the biological functions of plasma membranes and is a driving force for the lamellar-nonlamellar phase transition. We have investigated the phase behavior of a binary system consisting of egg yolk phosphatidylcholine and monoolein (MO) and the changes in the local orientation order of lipids in a lamellar-bicontinuous cubic phase transition. Small-angle X-ray scattering has revealed that the lamellar-bicontinuous cubic phase transition occurs at an MO molar fraction (X(MO)) between 0.6 and 0.7. These phases were dispersed to form liposomes and cubosomes to monitor the anisotropy of the incorporated fluorescence probe, in which Pluronic F127, used as a dispersion stabilizer of the cubic phase, has been proven not to alter the cubic structure and the location of the probes. Time-resolved fluorescence anisotropy measurements on these dispersions have revealed that the order parameter of the probe in the lamellar phase increases with increasing X(MO), and that it decreases during the transition to the cubic phase. This observation suggests that packing stress generated by the addition of the nonlamellar-forming lipid is released by the phase transition.     

Interaction of cubosomes with plasma components resulting in the destabilization of cubosomes in plasma

Cubosomes are novel dispersed nanoparticles with bicontinuous cubic phases of monoolein in their interior. We investigated their disintegration process in plasma by in vitro and in vivo studies. Cubosomes were incubated with whole plasma or plasma components such as HDL, LDL, and albumin. The lypolysis study indicated lipolytic activity of whole plasma towards cubosomes. Gel filtration chromatography revealed that HDL, LDL and albumin interacted with cubosomes. HDL affected cubosomes’ integrity and gave rise to smaller particles which contained the components of both cubosomes and HDL. Upon incubation with LDL, cubosomes fused with LDL. Albumin was shown to take up monoolein out of the particles. Cubosomes were disintegrated by whole plasma as a result of the interaction with plasma components. It was concluded that in vivo observation of a long circulation time of a hydrophobic substance in cubosomes was due to the sustained behavior of cubosome remnant particles.     

Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365     

Synthesis of phosphorus‐containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Divinyl ether monomers containing phosphorous residues were synthesized by the addition reaction of glycidyl vinyl ether (GVE) with various phosphonic dichlorides or dichlorophosphates with quaternary onium salts as catalysts. The reaction of GVE with phenylphosphonic dichloride gave bis[1‐(chloromethyl)‐2‐(vinyloxy)ethyl]phenylphosphonate ( 1a ) in a 77% yield. The polycondensation of 1a with terephthalic acid was also carried out with 1,8‐diazabicyclo[5.4.0]undecene‐7 (DBU) as a condensing agent to afford the corresponding phosphorus‐containing polyester. A multifunctional monomer containing both vinyl ether groups and methacrylate groups was prepared by the reaction of 1a with methacrylic acid with DBU. The photoinitiated cationic polymerization of these vinyl ether compounds proceeded rapidly with bis[4‐(diphenylsulfonio)phenyl]sulfide‐bishexafluorophosphate as the cationic photoinitiator without a solvent upon ultraviolet irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2031–2042, 2004     

Liquid-membrane type diethyldithiocarbamate ion-selective electrode and its application to the potentiometric titration of metal ions

Summary A liquid-membrane type diethyldithiocarbamate ion-selective electrode (DDC-ISE) was constructed by utilizing the nitrobenzene extract of the methyltrioctylammonium-DDC ion-pair. The DDC-ISE shows Nernstian response in the concentration range of 10^–5–10^–1 M DDC in 0.1 M sodium hydroxide solution. The electrode potential is constant in the pH range of 7.6–13.0. Potentiometric titrations of Hg(II), Cu(II), Ni(II) and Zn(II) in ammoniacal solutions with NaDDC and successive titration of two binary systems, Hg(II)-Ni(II) and Hg(II)-Zn(II), were successfully carried out with this electrode.

---

Diethyldithiocarbamat-ionenselektive Flüssig-Membranelektrode und ihre Anwendung zur potentiometrischen Titration von Metallionen

Zusammenfassung Eine Diethyldithiocarbamat-ionenselektive Flüssig-Membranelektrode (DDC-ISE) wurde entwickelt, die den Nitrobenzolextrakt des Ionenpaares Methyltrioctylammonium-DDC benutzt. Die DDC-ISE zeigt Nernstsches Ansprech-Verhalten im Konzentrationsbereich von 10^–5–10^–1 M DDC in 0,1 M Natriumhydroxidlösung. Das Elektrodenpotential ist im pH-Bereich von 7,6–13,0 konstant. Potentiometrische Titrationen von Hg(II), Cu(II), Ni(II) und Zn(II) mit NaDDC in ammoniakalischer Lösung sowie sukzessive Titrationen der binären Systeme Hg(II)-Ni(II) und Hg(II) — Zn(II) wurden erfolgreich durchgeführt.

     

Beam-polarization asymmetries for the p(gamma-->, K+)Lambda and p(gamma-->, K+)Sigma(0) reactions for E(gamma)=1.5-2.4 GeV

Beam polarization asymmetries for the p(gamma-->,K+)Lambda and p(gamma-->,K+)Sigma(0) reactions are measured for the first time for E(gamma)=1.5-2.4 GeV and 0.6相似文献   

Determination of interbilayer and transbilayer lipid transfers by time-resolved small-angle neutron scattering

We applied a time-resolved small-angle neutron scattering technique to the vesicle system of dimyristoylphosphatidylcholine for the first time to determine lipid kinetics. The observed kinetics could be explicitly represented by a simple model that includes two independent kinetic parameters, i.e., the rates of transbilayer and interbilayer exchange. This technique is perfectly suited for the determination of lipid exchange kinetics in equilibrium and applicable to evaluation of the activity of the factors relevant to lipid migration, such as translocase and lipid transfer proteins.     

Differential Effects of Cold Exposure on Gene Expression Profiles in White Versus Brown Adipose Tissue

The thermogenic function of brown adipose tissue (BAT) is known to be markedly elevated when animals are exposed to the cold, and intensive studies have been carried out to understand the molecular basis enabling effective thermogenesis in cold-exposed animals. In this study, we used microarray analysis to examine the effects of cold exposure of animals on their gene expression profiles in white adipose tissue (WAT), which seems to function as a counterpart tissue of BAT. The results indicate that the effects of cold exposure on the gene expression profiles of WAT were much more moderate than the effects on those of BAT. Possible reasons for the different responses of BAT and WAT to cold exposure are discussed.     

Versatile method for the synthesis of 4-substituted 6-methyl-3-oxabicyclo[3.3.1]non-6-ene-1-methanol derivatives: Prins-type cyclization reaction catalyzed by hafnium triflate

A versatile method for the synthesis of 4-substituted 6-methyl-3-oxabicyclo[3.3.1]non-6-ene-1-methanol derivatives has been developed using Prins-type cyclization reaction between aldehydes and O-protected/unprotected cyclohex-3-ene-1,1-dimethanol. Under optimized reaction conditions using hafnium triflate, various substrates, including functionalized benzaldehydes and heteroaromatic carbaldehydes, afforded cyclization products in high yields.     

Effect of formulated ingredients on rapidly disintegrating oral tablets prepared by the crystalline transition method

The aim of this article was to determine the optimal ingredients for the rapidly disintegrating oral tablets prepared by the crystalline transition method (CT method). The effect of ingredients (diluent, active drug substance and amorphous sugar) on the characteristics of the tablets was investigated. The ingredients were compressed and the resultant tablets were stored under various conditions. The oral disintegration time of the tablet significantly depended on diluents, due to differences in the penetration of a small amount of water in the mouth and the viscous area formed inside the tablet. The oral disintegration time was 10-30 s for tablets with a tensile strength of approximately 1 MPa, when erythritol, mannitol or xylitol was used as the diluent. The increase in the tensile strength of tablets containing highly water-soluble active drug substances during storage was as large as that of tablets without active drug substances, while the increase in the tensile strength of tablets containing low water-soluble active drug substances was small. It was therefore found that highly water-soluble active drug substances were more suitable for the formulation prepared by the CT method than low water-soluble active drug substances. Irrespective of the type of amorphous sugar (amorphous sucrose, lactose or maltose) used, the porosity of tablets with 1 MPa of tensile strength was 30-40%, and their oral disintegration time was 10-20 s. The optimal ingredients for rapidly disintegrating oral tablets with reasonable tensile strength and disintegration time were therefore determined from these results.