Study of the synthesis of poly(isobutylene-b-amide-11) by polycondensation α,ω-dianhydride oligoisobutylene with α,ω-diamino oligoamide-11. II. Synthesis of the block copolymers by reaction in solution

Several di-, tri- or multiblock poly(isobutylene-b-amide-11)s are prepared by reaction of α-mono or α,ω-dianhydride oligoisobutylenes with α-mono or α,ω-diamino oligoamides, in o-dichorobenzene at 140°C. They are characterized mainly by ¹H- and ¹³C-NMR spectroscopy and GPC, using the trifluoroacetylation technique. Their thermal differential chromatograms are reported and analyzed.     

Simultaneous speciation of mercury and butyltin compounds in natural waters and snow by propylation and species-specific isotope dilution mass spectrometry analysis

A robust method has been developed for simultaneous determination of mercury and butyltin compounds in aqueous samples. This method is capable of providing accurate results for analyte concentrations in the picogram per liter to nanogram per liter range. The simultaneous determination of the mercury and tin compounds is achieved by species-specific isotope dilution, derivatization, and gas chromatography–inductively coupled plasma mass spectrometer (GC–ICP–MS). In derivatization by ethylation and propylation, reaction conditions such as pH and the effect of chloride were carefully studied. Ethylation was found to be more sensitive to matrix effects, especially for mercury compounds. Propylation was thus the preferred derivatization method for simultaneous determination of organomercury and organotin compounds in environmental samples. The analytical method is highly accurate and precise, with RSD values of 1 and 3% for analyte concentrations in the picogram per liter to nanogram per liter range. By use of cleaning procedures and SIDMS blank measurements, detection limits in the range 10–60 pg L^–1 were achieved; these are suitable for determination of background levels of these contaminants in environmental samples. This was demonstrated by using the method for analysis of real snow and seawater samples. This work illustrates the great advantage of species-specific isotope dilution for the validation of an analytical speciation method—the possibility of overcoming species transformations and non-quantitative recovery. Analysis time is saved by use of the simultaneous method, because of the use of a single sample-preparation procedure and one analysis.     

Preparation of amphiphilic polyisobutylenes-b-polyethylenamines by mannich reaction. I. Synthesis and characterization of α-phenololigoisobutylenes

The cationic polymerization of isobutylene initiated by 4-(2-hydroxy-2-propyl)phenol/BCl₃ system results mainly in α-phenol-ω-chlorooligoisobutylene; however p-(2-chloro-2,4-dimethyl-4-pentyl)phenol is present in all cases. α-Methyl-ω-chlorooligoisobutylene is formed only when the temperature is below?50°C; it results from initiation by the phenol/BCl₃ system. Thermal dehydrochlorination of α-phenol-ω-chlorooligoisobutylene is quantitative and leads to a mixture of isomeric ω-unsaturated oligoisobutylenes. α-Methyl-ω-phenololigoisobutylene is prepared by the Friedel—Crafts reaction between industrial unsaturated oligoisobutylene and phenol in the presence of SnCl₄ at ?30°C; the reaction is quantitative between ?50 and ?30°C degradation takes place. © 1993 John Wiley & Sons, Inc.     

Underpotential deposition of hydrogen on benzene-modified Pt(111) in aqueous H2SO4

The Pt(111) electrode is modified by an overlayer of C6H6 (ads) upon its cycling in the 0.05-0.80 V range in aq H2SO4 + 1 mM C6H6. The C6H6 (ads) overlayer significantly changes the underpotential-deposited H (H(UPD)) and anion adsorption, and cyclic-voltammetry (CV) profiles show a sharp cathodic peak and an asymmetric anodic one in the 0.05-0.80 V potential range. The C6H6 (ads) layer blocks the (bi)sulfate adsorption but facilitates the adsorption of one monolayer of H(UPD). Cycling of the benzene-modified Pt(111) in benzene-free aq 0.05 H2SO4 from 0.05 to 0.80 V results in a partial desorption of C6H6 (ads) and in a partial recovery of the CV profile characteristic of an unmodified Pt(111). The peak potential of the cathodic and anodic feature is independent of the scan rate, s (10 < or = s < or = 100 mV s(-1)), and the peak current density increases linearly with an increase of the scan rate. Temperature variation modifies the peak potential and current density but does not affect the charge density of the cathodic or anodic feature. Temperature-dependent studies allow us to determine the thermodynamic state function for the H(UPD) adsorption and desorption. Delta G degrees(ads)(H(UPD))assumes values from -4 to -12 kJ mol(-1), while has values from 9 to 14 kJ mol(-1). The values of delta Delta G degrees (delta Delta G degrees = delat Delta G degrees(ads) + delta Delta D degrees(des)) decrease almost linearly from 6 kJ mol(-1) at theta(H(UPD) --> 0 to 0 kJ mol(-1) at theta(H(UPD) --> 1. The nonzero values of delta Delta G degrees testify that the adsorbing and desorbing H(UPD) adatoms interact with an energetically different substrate. The lateral interactions changed from repulsive (omega = 29 kJ mol(-1) at theta(H(UPD) --> 0) to attractive (omega = -28 kJ mol(-1) at theta(H(UPD) --> 1) as the H(UPD) coverage increases. The values of delta S degrees(ads)(H(UPD)) increase from 19 to 56 J K(-1) mol(-1), while those of delta S degrees(des)(H(UPD)) decrease from 45 to -30 J K(-1) mol(-1) with an increase of H(UPD) coverage. The values of delta H degrees(des)(H(UPD)) and delta H degrees(des)(H(UPD)) vary from 0 to 27 kJ mol(-1). The Pt(111)-H(UPD) surface bond energy at the benzene-modified Pt(111) electrode falls in the 191-218 kJ mol(-1) range and is weaker than in the case of the unmodified Pt(111) electrode in the same electrolyte.     

Dynamic contrast-enhanced MRI of vascular changes induced by the VEGF-signalling inhibitor ZD4190 in human tumour xenografts

Dynamic contrast-enhanced magnetic resonance imaging (DCEMRI) was used to examine the acute effects of treatment with an inhibitor of vascular endothelial growth factor (VEGF) signaling. ZD4190 is an orally bioavailable inhibitor of VEGF receptor-2 (KDR) tyrosine kinase activity, which elicits broad-spectrum antitumour activity in preclinical models following chronic once-daily dosing. Nude mice, bearing established (0.5-1.0 mL volume) human prostate (PC-3), lung (Calu-6) and breast (MDA-MB-231) tumor xenografts, were dosed with ZD4190 (p.o.) using a 1 day (0 and 22 h) or 7 day (0, 24, 48, 72, 96,120,144, and 166 h) treatment regimen. DCEMRI was employed 2 h after the last dose of ZD4190, using the contrast agent gadopentetate dimeglumine. Dynamic data were fit to a compartmental model to obtain voxelwise K(trans), the transfer constant for gadopentetate into the tumor. K(trans) was averaged over the entire tumor, and a multi-threshold histogram analysis was also employed to account for tumor heterogeneity. Reductions in K(trans) reflect reductions in flow, in endothelial surface area, and/or in vascular permeability. A vascular input function was obtained for each mouse simultaneously with the tumor DCEMRI data. ZD4190 treatment produced a dose-dependent (12.5-100 mg x kg(-1) per dose) reduction in K(trans) in PC-3 prostate tumors. At 100 mg x kg(-1), the largest concentration examined, ZD4190 reduced K(trans) in PC-3 tumors by 31% following 2 doses (1 day treatment regimen; p < 0.001) and by 53% following 8 doses (7 day regimen; p < 0.001). Comparative studies in the three models using a showed similar reductions in K(trans) for the lung and breast tumors using the histogram analysis, although the statistical significance was lost when K(trans) was averaged over the entire tumor. Collectively these studies suggest that DCEMRI using gadopentetate may have potential clinically, for monitoring inhibition of VEGF signaling in solid tumors.     

Synthesis and anticancer properties of gold(I) and silver(I) N-heterocyclic carbene complexes

Bis(1,3-dimethylimidazol-2-ylidene)silver(I) nitrate and bis(4,5-dichloro-1,3-dimethylimidazol-2-ylidene)silver(I) nitrate were prepared by reacting the corresponding imidazolium nitrate salts with silver oxide. Bis(1,3-dimethylimidazol-2-ylidene)gold(I) nitrate and bis(4,5-dichloro-1,3-dimethylimidazol-2-ylidene)gold(I) nitrate salts were prepared via transmetallation of their silver precursors with chloro dimethylsulfide gold. The anticancer properties were determined using NCI-H460 lung cancer cells. Efficacy was established by comparison of the gold and silver compounds with cisplatin.     

Powder preparation and UV absorption properties of selected compositions in the CeO2-Y2O3 system

Several approaches have been investigated to prepare fluorite-type compositions within the (1−x) CeO₂-xYO_1.5 system. The optical properties of the resulting modified-ceria materials have been characterized in order to evaluate their potential abilities as inorganic UV absorbers. Diffuse reflectance analyses reveal a strong optical absorption between 390 and 400 nm for all substituted compositions and the spectral selectivities are estimated suitable for the targeted application. Additionally, time resolved microwave conductivity (TRMC) and phenol photodegradation analyses do not indicate any photocalatytic activity for these compositions. Aqueous colloidal suspensions of the Ce_0.7Y_0.3O_1.85 UV absorber have been carried out.     

Multiple wavelength reflectance microscopy to study the multiphysical behavior of microelectromechanical systems

In order to characterize surface chemomechanical phenomena driving microelectromechanical systems behavior, we propose herein a method to simultaneously obtain a full kinematic field describing the surface displacement and a map of its chemical modification from optical measurements. Using a microscope, reflected intensity fields are recorded for two different illumination wavelengths. Decoupling the wavelength-independent and -dependent contributions to the measured relative intensity changes then yields the sought fields. This method is applied to the investigation of the electroelastic coupling, providing images of both the local surface electrical charge density and the device deformation field.