Simultaneous Determination of Gallic Acid and Folic Acid in Fruit Juice Samples Using Square Wave Voltammetry at Electrochemically Pretreated Carbon Paste Electrode

An efficient sensor was developed for the simultaneous determination of gallic and folic acid in juice samples using an electrochemically pretreated carbon paste electrode. The electrode was characterized by CV and EIS. The electrochemical behavior of GA and FA was evaluated by CV and SWV. The electrode exhibited high electrocatalytic activity towards GA and FA due to high surface area. Under the optimized condition, linear plots in the ranges of 0.08–13 μM and 0.1 to 15 μM were obtained for GA and FA, respectively. The proposed method was successful for the simultaneous determination of GA and FA in juice samples with satisfactory recovery.     

Ethiopian Medicinal Plants Traditionally Used for the Treatment of Cancer; Part 3: Selective Cytotoxic Activity of 22 Plants against Human Cancer Cell Lines

Medicinal plants have been traditionally used to treat cancer in Ethiopia. However, very few studies have reported the in vitro anticancer activities of medicinal plants that are collected from different agro-ecological zones of Ethiopia. Hence, the main aim of this study was to screen the cytotoxic activities of 80% methanol extracts of 22 plants against human peripheral blood mononuclear cells (PBMCs), as well as human breast (MCF-7), lung (A427), bladder (RT-4), and cervical (SiSo) cancer cell lines. Active extracts were further screened against human large cell lung carcinoma (LCLC-103H), pancreatic cancer (DAN-G), ovarian cancer (A2780), and squamous cell carcinoma of the esophagus (KYSE-70) by using the crystal violet cell proliferation assay, while the vitality of the acute myeloid leukemia (HL-60) and histiocytic lymphoma (U-937) cell lines was monitored in the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) microtiter assay. Euphorbia schimperiana, Acokanthera schimperi, Kniphofia foliosa, and Kalanchoe petitiana exhibited potent antiproliferative activity against A427, RT-4, MCF-7, and SiSo cell lines, with IC₅₀ values ranging from 1.85 ± 0.44 to 17.8 ± 2.31 µg/mL. Furthermore, these four extracts also showed potent antiproliferative activities against LCLC-103H, DAN-G, A2780, KYSE-70, HL-60, and U-937 cell lines, with IC₅₀ values ranging from 0.086 to 27.06 ± 10.8 µg/mL. Hence, further studies focusing on bio-assay-guided isolation and structural elucidation of active cytotoxic compounds from these plants are warranted.     

Phytochemical investigations of <Emphasis Type="Italic">Vernonia galamensis</Emphasis> seeds

Vernonia galamensis is a new potential industrial oil seed crop for semiarid areas with very high content of naturally epoxidized vernolic acid (80% of the oil). Chemical investigation of the seeds of Vernonia galamensis afforded two compounds, which are vernolic acid derivatives. Their structures were established by various spectroscopic techniques: IR, UV, NMR, and 2D NMR spectra (COSY, HSQC, and HMBC), and by comparison with literature data for the known compound methylvernolate. The cis-(12S,13R)-(3-methylpentyl) vernolate (1) and the cis-(12S,13R)-(2,3-propanediol) vernolate (2) were isolated and characterized.     

Charge propagation in "ion channel sensors" based on protein-modified electrodes and redox marker ions

The mechanism of charge propagation in "ion channel sensors" (ICSs) consisting of gold electrodes modified with a layer of charged proteins and highly charged redox-active marker ions in solution was investigated by electrochemical techniques, QCM and AFM. The study is based on seven proteins (concanavalin A, cytochrome c, glucose oxidase, lysozyme, thyroglobulin, catalase, aldolase, and EF1-ATPase) in combination with seven electroactive marker ions ([Fe(CN)6]3-, [Fe(CN)6]4-, [Ru(NH3)6]3+, mono-, di-, and trimeric viologens), as well as a series of suppressor and enhancer ions leading to the following general statements: (i) electrostatic binding of charged marker ions to the domains of the protein is a prerequisite for an electrochemical current and (ii) charge propagation through the layer consists of electron hopping along surface-confined marker ions into the pores between adsorbed proteins. It is further shown that (iii) marker ions and suppressor ions with identical charge compete for oppositely charged sites on the protein domain, (iv) electrostatically bound multilayers of marker or enhancer ions with alternating charge form on a charged protein domain, and (v) self-exchange and exergonic ET catalysis between adsorbed marker ions and marker ions in solution take place. In addition to fundamental insight into the mechanism of charge propagation, valuable information for the design, optimization, and tailoring of new biosensors based on the ICS concept is demonstrated by the current findings.     

Electrochemical Fabrication of Nanostructured Surfaces for Enhanced Response

The objective of this work is to explore approaches to enhance electrochemical signals through sequential deposition and capping of gold particles. Gold nanoparticles are electrodeposited from KAuCl₄ solution under potentiostatic conditions on glassy carbon substrates. The number density of the nanoparticles is increased by multiple deposition steps. To prevent secondary nucleation processes, the nanoparticles are isolated after each potentiostatic deposition step by self‐assembled monolayers (SAMs) of decanethiol or mercaptoethanol. The increasing number of particles during five deposition/protection rounds is monitored by assembling electroactive SAMs using a ferrocene‐labeled alkanethiol. A precise estimation of the surface area of the gold nanoparticles by formation of an oxide layer on gold is difficult due to oxidation of the glassy carbon surface. As an alternative approach, the charge flow of the electroactive SAM is used for surface measurement of the gold surface area. A sixfold increase in the redox signal in comparison to a bulk gold surface is observed, and this increase in redox signal is particularly notable given that the surface area of the deposited nanoparticles is only a fraction of the bulk gold surface. After five rounds of deposition there is a gold loading of 1.94 μg cm^?2 of the deposited nanoparticles as compared to 23.68 μg cm^?2 for the bulk gold surface. Remarkably, however, the surface coverage of the ferrocene alkanethiol on the bulk material is only 10 % of that achieved on the deposited nanoparticles. This enhancement in signal of the nanoparticle‐modified surface in comparison to bulk gold is thus demonstrated not to be attributable to an increase in surface area, but rather to the inherent properties of the surface atoms of the nanoparticles, which are more reactive than the surface atoms of the bulk material.     

Label-free aptasensor for platelet-derived growth factor (PDGF) protein

A label-free aptasensor for platelet-derived growth factor (PDGF) protein is reported. The aptasensor uses mixed self-assembled monolayers (SAMs) composed of a thiol-modified PDGF binding aptamer and 6-mercaptohexanol (MCH) on a gold electrode. The SAMs were characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) before and after binding of the protein using [Fe(CN)₆]^3−/4−, a redox marker ion as an indicator for the formation of a protein-aptamer complex. The CVs at the PDGF modified electrode showed significant differences, such as changes in the peak currents and peak-to-peak separation, before and after binding of the target protein. The EIS spectra, in the form of Nyquist plots, were analyzed with a Randles circuit while the electron transfer resistance R_ct was used to monitor the binding of the target protein. The results showed that, without any modification to the aptamer, the target protein can be recognized effectively at the PDGF binding aptamer SAMs at the electrode surface. Control experiments using non-binding oligonucleotides assembled at the electrode surfaces also confirmed the results and showed that there was no formation of an aptamer-protein complex. The DPV signal at the aptamer functionalized electrode showed a linearly decreased marker ion peak current in a protein concentrations range of 1-40 nM. Thus, label-free detection of PDGF protein at an aptamer modified electrode has been demonstrated.     

Emptying and filling a tunnel bronze

The classical orthorhombic layered phase of V₂O₅ has long been regarded as the thermodynamic sink for binary vanadium oxides and has found great practical utility as a result of its open framework and easily accessible redox states. Herein, we exploit a cation-exchange mechanism to synthesize a new stable tunnel-structured polymorph of V₂O₅ (ζ-V₂O₅) and demonstrate the subsequent ability of this framework to accommodate Li and Mg ions. The facile extraction and insertion of cations and stabilization of the novel tunnel framework is facilitated by the nanometer-sized dimensions of the materials, which leads to accommodation of strain without amorphization. The topotactic approach demonstrated here indicates not just novel intercalation chemistry accessible at nanoscale dimensions but also suggests a facile synthetic route to ternary vanadium oxide bronzes (M_xV₂O₅) exhibiting intriguing physical properties that range from electronic phase transitions to charge ordering and superconductivity.     

Electrochemical determination of lead using bismuth modified glassy carbon electrode

Electrochemical application of bismuth film modified glassy carbon electrode was studied with the objective of lead detection. Bismuth film on glassy carbon substrate was formed in a plating solution of 2 mmol/L Bi(NO₃)₃, in 1 mol/L HCl at ?1.1 V (vs. Ag/AgCl) for 300 s. Lead was detected by differential pulse anodic voltammetry in acetate buffer of pH 5.0 in the concentration range of 7.5 nmol/L to 12.5 μmol/L. Factors influencing the anodic stripping performance, including deposition time, solution pH, Bi(III) concentration, potential, pulse amplitude, pulse width, have been optimized. Three linear calibration plots in the range 7.5 nmol/L to 0.1 μmol/L, 0.25 to 1 μmol/L, 2.5 to 12.5 μmol/L with regression coefficients of 0.991, 0.986 and 0.978 respectively were obtained. The theoretical detection limit equivalent to three times standard deviation for 7.5 nmol/L lead (n = 5) was calculated to be 5.25 nmol/L utilizing a 5 min deposition time and sensitivity 83.97 A L/mol. The sensitivity and detection limit of the method was compared with reported voltammetric methods for detection of lead and the result obtained was found to be promising for determination of lead.