Non-destructive rapid analysis of brominated flame retardants in electrical and electronic equipment using Raman spectroscopy.

Using Raman spectroscopy without any preparation, we analyzed the brominated flame retardant, polybromodiphenyl ethers (PBDEs), which has been prohibited by the European Union. The typical Raman bands of PBDEs, which are clearly different from those of other brominated flame retardants, are from 100 to 300 cm(-1). In our analysis, the detection limit was about 100 ppm, and the analysis took about 1 min, whereas the usual method of solvent extraction using gas chromatography/mass spectroscopy takes 50 h.     

A SENSITIVE METHOD FOR DETERMINING CHLOROPHYLL b IN PLANT EXTRACTS

Abstract— A new method of using hydroxylamine as the reagent was developed to determine the concentrations of chlorophylls a and b in plant extracts accurately and sensitively. The method is based on the principle that hydroxylamine reacts in a short time with the aldehyde group of chlorophyll b in 95 per cent methanol at pH 5.8 to afford a derivative having a red band similar in position to the red band of chlorophyll a , while the spectrum of chlorophyll a is unaffected by the treatment with hydroxylamine. The method includes the measurements of absorbanlce for the mixture of a plant extract with hydroxylamine and for the reagent blank at a single wavelength, 666 mμ, and the concentrations of chlorophylls a and b are calculated from the absorbance value for the reagent blank and the increment of absorbance due to the reaction. By measuring this increment directly by difference photometry, one can determine a low concentration of chlorophyll b relative to chlorophyll a . The contents of chlorophylls in matured and etiolated leaves were determined by the method, and the errors included in this method were shown to be smaller than those in a commonly used technique including the measurements at two different wavelengths.     

Importance of single electron-transfer in singlet oxygen reaction in aqueous solution : Oxidation of electron-rich thioanisoles

Oxidation of substituted thioanisoles by chemically generated singlet oxygen was investigated in polar aqueous media. The formation of the superoxide ion was observed during sulphoxidation of 4-hydroxythioanisole (4) in phosphate buffer at pH 7.5. Control experiments indicated that the superoxide ion was formed by a direct reaction between singlet oxygen and 4. The kinetics of the trapping reaction by diphenylsulphoxide indicated the involvement of a single intermediate. The overall rate constants of the reaction of thioanisoles with singlet oxygen in methanol-water (1:1) are one order of magnitude larger than those in benzene. On the basis of these results, a mechanism involving a charge-transfer complex has been proposed for the reaction of electron-rich thioanisoles with singlet oxygen, whereby the charge-transfer complex would produce persulphoxide directly or dissociate to the cation radical and superoxide ion in polar aqueous media.     

Practical asymmetric synthesis of (S)-MA20565, a wide-spectrum agricultural fungicide

A practical asymmetric synthesis of a wide-spectrum agricultural fungicide, (S)-MA20565 (1), is described. The convergent synthesis was achieved starting from commercially available 3-(trifluoromethyl)aniline (7) in 44% overall yield through five steps and 2-bromobenzaldehyde (9) in 48% overall yield through four steps, respectively. (S)-O-[1-(3-Trifluoromethylphenyl)ethyl]hydroxylamine (2), a key intermediate of 1, was prepared via ruthenium(II)-catalyzed asymmetric transfer hydrogenation of 1-(3-trifluoromethylphenyl)ethanone (6) followed by chlorination using methanesulfonyl chloride and oxyamination using potassium acetohydroxamate with high level of stereocontrol.     

Triplet-mediated coupling of 5-bromo-1,3-dimetrhyluracil to Nb-methoxycarbonyltryptamine involving a double electron transfer

On acetone-sensitization, 5-bromo-1,3-dimethyluracil ($\text{1}$ reacts with N^b-methoxycarbonyltryptamine ($\text{4}$ under the assistance of an electron carrier such as 2-methoxynaphthalene to give a coupling product $\text{6}$. A mechanism involving a double electron transfer via the triplet state of $\text{1}$ is proposed.     

Efficient photochemical oxetane formation from 1-methyl-2,4,5-triphenylimidazole and benzophenones

In contrast to simple imidazoles, 1-methy1–2,4,5-triphenylimidazole ($\text{1}$) produced stable oxetane photoadducts $\text{3b}$ - $\text{e}$ with good efficiency upon irradiation in the presence of benzophenone derivatives $\text{2b}$ - $\text{e}$ in acetonitrile solution. Irradiation in the solid-phase was also studied. The oxetanes $\text{3b}$ - $\text{e}$ readily underwent cycloreversion by acid catalysis or by heating.     

Removal of fine powders from film surface. I. Effect of electrostatic force on the removal efficiency

A novel fine particle removal system composed of a corona-discharge neutralizer, a pulse-jet air unit and an image processing system has been developed. First of all, adhesion force between particle and film was directly measured and effect of electrostatic force on the adhesion force was calculated experimentally and theoretically. The electrostatic force was found to be significant, leading to the suggestion that the countermeasure for the electrostatic force was required to effectively remove fine particles. This system was then applied to the removal of fine particles from surface of a gelatin film used for conventional capsule material. The number of particles removed by the system was calculated by an image processing system and number base removal efficiency was computed with and without the elimination of electrostatic charge by the neutralizer. It was found that the difference between the removal efficiency of particles with elimination of electrostatic charge and that of without the elimination showed linear relationship with the electrostatic adhesion force. The data confirmed the necessity of electrostatic charge elimination for the effective removal of fine particles.     

Localization of Iα and Iβ phases in algal cellulose revealed by acid treatments

Highly crystalline I-rich type Cladophora cellulose, which had been kept in never-dried condition, was treated in 60wt% sulfuric acid at 100°C, for 1–48h. The cellulose microcrystals thus obtained were analysed by X-ray diffractometry, FT-IR, and transmission electron microscopy. The I component was found to be more degraded than the I component. The cellulose I/I ratios of the samples acid-treated for 0, 24, and 48 h were about 8:2, 6:4, and 4:6, respectively. After the acid treatment, the microcrystals became narrower in width, and very sharp at their ends. These results indicate that the I phase is mostly located at the surface of the microcrystals, which is morphologically more susceptible to the acid treatment.