Enantiodiscrimination of racemic electrophiles by diketopiperazine enolates: asymmetric synthesis of methyl 2-amino-3-aryl-butanoates and 3-methyl-aspartates

Enolates of (S)-N,N′-bis-(p-methoxybenzyl)-3-iso-propylpiperazine-2,5-dione exhibit high levels of enantiodiscrimination in alkylations with (RS)-1-aryl-1-bromoethanes and (RS)-2-bromoesters, affording substituted diketopiperazines containing two new stereogenic centres in high de. Deprotection and hydrolysis of the resultant substituted diketopiperazines provides a route to the asymmetric synthesis of homochiral methyl 2-amino-3-aryl-butanoates and 3-methyl-aspartates in high de and ee.     

可溶性汞化苯乙烯－丙烯酸甲酯共聚物的合成

用自由基溶液降合方法制备一系列苯乙烯－丙烯酸甲酯线型共聚物，用核磁共振测定了苯基在共聚物中的百分比，在该共聚物的四氢呋喃溶液中，用三氟乙酸汞在共聚物的苯环上进行亲电取代反应，得到可溶性汞化共聚物，由于这类泵化共的可溶于四氢呋喃，二氯甲烷等溶剂，用重沉淀法多次提纯，得到了纯度很高，溶解性较好的含重金属二价汞的共聚物，用红外光谱仪测定共聚物上的汞基团，用原子吸收定量测试共聚中的汞的百分聚代率，结果表明     

Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides

Three different molecularly imprinted polymers (MIPs) have been prepared by precipitation polymerisation using linuron (LIN) or isoproturon (IPN) (phenylurea herbicides) as templates and methacrylic acid (MAA) or trifluormethacrylic acid (TFMAA) as functional monomers. The ability of the different polymers to selectively rebind not only the template but also other phenylurea herbicides has been evaluated. In parallel, the influence of the different templates and functional monomers used during polymers synthesis on the performance of the obtained MIPs was also studied through different rebinding experiments. The experimental binding isotherms were fitted to the Langmuir-Freundlich isotherm allowing to describe the kind of binding sites present in the imprinted polymers under study. It was concluded that TFMAA-based polymer using IPN as template presents the best properties to be used as a selective sorbent for the extraction of phenylurea herbicides.     

Polyhydroxylated pyrrolizidines. Part 6: A new and concise stereoselective synthesis of (+)-casuarine and its 6,7-diepi isomer, from DMDP

A new synthesis for (+)-casuarine (1) and its 6,7-diepi isomer (15) in a stereocontrolled manner, is reported herein. An appropriately protected polyhydroxylated pyrrolidine, such as (2R,3R,4R,5R)-3,4-dibenzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine (3, protected DMDP), easily available from d-fructose, was chosen as the chiral starting material. Compounds 1 and 15 were obtained from 3, in seven steps, in a 23.2 and 20.5% overall yields, respectively.     

Synthesis and evaluation of new propazine-imprinted polymer formats for use as stationary phases in liquid chromatography

Silica particles have been used as supports for the preparation of three different propazine-imprinted polymer formats. First format refers to grafting of thin films of molecularly imprinted polymers (MIPs) using an immobilised iniferter-type initiator (inif-MIP). The other two new formats were obtained by complete filling of the silica pores with the appropriate polymerisation mixture leading to a silica-MIP composite material (c-MIP) followed by the dissolution of the silica matrix resulting in spherical MIP beads (dis-MIP). These techniques offer a mean of fine-tuning the particle morphology of the resulting MIP particles leading to enhanced capacity in chromatographic applications. Porous silica (specific surface area S = 380 m² g⁻¹, particle size p_s = 10 μm, pore volume V_p = 1.083 ml g⁻¹ and pore diameter d_p = 10.5 nm), methacrylic acid and ethylenglycol dimethacrylate were used for the preparation of the materials. All the MIP formats imprinted with propazine have been characterised by elemental analysis, FT-IR spectroscopy, nitrogen adsorption and scanning electron microscopy. Further, the materials were assessed as stationary phases in HPLC. Capacity factors, imprinting factors and theoretical plate numbers were calculated for propazine and other related triazines in order to compare the chromatographic properties of the three different stationary phases. For the inif-MIPs the column efficiency depended strongly on the amount of grafted polymer. Thus, only the polymers grafted as thin films of ca. 1.3 nm average thickness show imprinting effects and the highest column efficiency giving plate numbers (N) of 1600 m⁻¹ for the imprinted propazine. The performance of the c-MIP stationary phase decreases as result of the complete pore filling after polymerisation and increases again after the removal of the silica matrix due to a better mass transfer in the porous mirror-image resulting polymer. From this study can be concluded that the inif-MIP shows the best efficiency for use as stationary phase in HPLC for the separation of triazinic herbicides.     

Natural product based inhibitors of the thioredoxin-thioredoxin reductase system

Spiroketal naphthodecalins are readily assembled by Barton's base mediated Ullmann binaphthyl ether coupling, Dakin reactions and hypervalent iodine spirocyclization. The core structures can be further diversified by enone addition and Stille coupling reactions. Nanomolar inhibitors for the Trx/TrxR redox control system were prepared by this approach and compared to series of natural product isolates. Cytotoxicity in MCF-7 cell assays ranged from an IC50 of 1.6 to >100 microM.     

Diastereoselective conjugate reduction with samarium diiodide: asymmetric synthesis of methyl (2S,3R)-N-acetyl-2-amino-2,3-dideuterio-3-phenylpropionate

A highly diastereoselective conjugate reduction using SmI2 and D2O has been demonstrated on a homochiral benzylidene diketopiperazine template, giving methyl (2S,3R)-N-acetyl-2-amino-2,3-dideuterio-3-phenylpropionate in 93% de and 90% ee after deprotection, hydrolysis and N-acetylation.