Quantitation of acrylamide in food products by liquid chromatography/mass spectrometry

A simple and inexpensive liquid chromatography/mass spectrometry (LC/MS) method was developed for the quantitation of acrylamide in various food products. The method involved spiking the isotope-substituted internal standard (1-C13 acrylamide) onto 6.00 g of the food product, adding 40 mL distilled/deionized water, and heating at 65 degrees C for 30 min. Afterwards, 10 mL ethylene dichloride was added and the mixture was homogenized for 30 s and centrifuged at 2700 x g for 30 min, and then 8 g supernatant was extracted with 10, 5, and 5 mL portions of ethyl acetate. The extracts were combined, dried with sodium sulfate, and concentrated to 100-200 microL. Acrylamide was determined by analysis of the final extract on a single quadrupole, bench-top mass spectrometer with electrospray ionization, using a 2 mm id C18 column and monitoring m/z = 72 (acrylamide) and m/z = 73 (internal standard). For difficult food matrixes, such as coffee and cocoa, a solid-phase extraction cleanup step was incorporated to improve both chromatography and column lifetime. The method had a limit of quantitation of 10 ppb, and coefficients of determination (r2) for calibration curves were typically better than 0.998. Acceptable spike recovery results were achieved in 11 different food matrixes. Precision in potato chip analyses was 5-8% (relative standard deviation). This method provides an LC/MS alternative to the current LC/MS/MS methods and derivatization gas chromatography/mass spectrometry methods, and is applicable to difficult food products such as coffee, cocoa, and high-salt foods.     

Resonance-enhanced multiphoton ionisation photoelectron spectroscopy of the ClO radical: the C 2 sigma- state

A (2 + 1) one-colour resonance-enhanced multiphoton ionisation study is carried out on the C 2 sigma- state of the ClO radical in the one-photon energy range 29,500-31,250 cm-1. The ClO radical is produced by one-photon photolysis of ClO2 employing 359.2 nm photons derived from a separate laser. In this way a significant concentration of vibrationally excited ClO in its spin-orbit split X 2 pi omega (omega = 3/2 or 1/2) electronic ground state is produced. In addition to mass-resolved excitation spectra, kinetic-energy resolved photoelectron spectra for the X 3 sigma-(v+)<--C 2 sigma-(v' = 3-5) transitions are measured. These transitions are not completely Frank-Condon diagonal, and indicate a decrease in bond length on removal of the Rydberg electron from the C 2 sigma- state. In addition to an unambiguous assignment of the C 2 sigma- state, valuable information is obtained on the degree of vibrational excitation with which the nascent ClO radical is formed in the photolysis of ClO2. Analysis of the photoelectron spectra is supported by Franck-Condon calculations based on potential energy curves either from experimental spectroscopic parameters, or obtained by theoretical ab initio methods.     

Photoelastic determination of stresses in multiple-pin connectors

The design, fabrication, and testing of photoelastic models of double-lap, multiple-pin connectors are discussed. Interest is in the stresses in the inner laps. These stresses are determined by constructing models with photoelastic inner laps and transparent-acrylic outer laps. The connectors have two pins, in tandem, parallel to the load direction. A photoelastic-isotropic point is shown to permit the evaluation of load sharing between the two pins. A numerical scheme, utilizing the isochromatic- and isoclinic-photoelastic data and a finite-difference representation of the planestress equilibrium equations, is used to compute the stresses around the two pins. Representative stress distributions and stress-concentration factors are shown.     

Binnie's investigation into the viscous lifting of liquids by withdrawal

A simple way for coating thin liquid films on solid supports is by means of the upward motion of the solid through a bath of wetting liquid. The Van Rossum experimental relationship for this withdrawal problem has recently been recast in another form by Binnie. Alternative representations of with-drawal are given here for comparison with the work of Binnie.     

Phage display-derived inhibitor of the essential cell wall biosynthesis enzyme MurF

Background  

To develop antibacterial agents having novel modes of action against bacterial cell wall biosynthesis, we targeted the essential MurF enzyme of the antibiotic resistant pathogen Pseudomonas aeruginosa. MurF catalyzes the formation of a peptide bond between D-Alanyl-D-Alanine (D-Ala-D-Ala) and the cell wall precursor uridine 5'-diphosphoryl N-acetylmuramoyl-L-alanyl-D-glutamyl-meso-diaminopimelic acid (UDP-MurNAc-Ala-Glu-meso-A2pm) with the concomitant hydrolysis of ATP to ADP and inorganic phosphate, yielding UDP-N-acetylmuramyl-pentapeptide. As MurF acts on a dipeptide, we exploited a phage display approach to identify peptide ligands having high binding affinities for the enzyme.     

Fracture of thick laminated composites

The fracture of thick laminated graphite/epoxy composites has been the subject of an extensive research program. The program was divided into three major areas of investigation which included laminate thickness, laminate stacking sequence, and part-through surface flaws. The results from this program are reviewed with emphasis placed on their applicability to the design of thick laminated composite structures. Paper was presented at 1985 SEM Spring Conference on Experimental Mechanics held in Las Vegas on June 9–14, 1985.     

THE RATES OF PHOTOLYSIS OF THE FOUR INDIVIDUAL TRYPTOPHAN RESIDUES IN UV EXPOSED CALF γ-II CRYSTALLIN

Aqueous buffer solutions of the lens protein bovine gamma-II crystallin were irradiated at 295 nm in the presence of dithiothreitol to determine the individual photolysis susceptibilities of the four tryptophan residues. Reverse-phase high performance liquid chromatography was utilized to compare the tryptic peptide maps before and after irradiation. Sequence analysis of collected tryptic peptides showed that the four tryptophans in calf gamma-II crystallin. TRP-42, TRP-68, TRP-131, and TRP-157 appeared in four distinct tryptic peptides. Fluorescence and absorption (diode array) monitoring of the eluting peptides allowed assessment of the changes in peptide absorbance and fluorescence following irradiation. Tryptophan fluorescence losses of (40 +/- 15)%, (17 +/- 4)%, (35 +/- 5)% and (15 +/- 4)% were observed for the peptides containing TRP-42, TRP-68, TRP-131 and TRP-157, respectively. Thus the four tryptophans in calf gamma-II crystallin did not all photolyze at the same rate. The rate differences are presumably related to the microenvironments of the individual tryptophan residues, and this is discussed in terms of the known crystal structure of calf gamma-II crystallin.     

Velocity profiles for plate withdrawal at high speeds

A simplified Navier-Stokes equation is applied to the solution of the velocity profile in the liquid meniscus adhering to long flat supports withdrawn continuously from baths of quiescent liquids. The inertial term is included using an Oseen approximation, the inhomogeneous boundary condition is transformed, and the resulting differential equation is solved by the method of eigenfunction expansions. The series describing the velocity profile and volume flowrate are both found to be rapidly convergent.