Identification and determination of sulphamethazine and N4-acetylsulphamethazine in meat by high-performance liquid chromatography with photodiode-array detection

A simple and selective method for the determination of sulphamethazine (SMT) and its metabolite, N4-acetylsulphamethazine (N4-AcSMT), in meat by high-performance liquid chromatography (HPLC) with photodiode-array detection was developed. The drugs were extracted from meat with 0.2% metaphosphoric acid-methanol (6:4), followed by a Bond-Elut C18 clean-up procedure. The HPLC separation was carried out on a Supersphere RP-18e column (125 X 4.0 mm I.D.) using 0.05 M sodium dihydrogenphosphate (pH 4.5)-acetonitrile (8:2) as the mobile phase at a flow-rate of 0.5 ml/min, and monitored with a photodiode-array detector. The recoveries of SMT and N4-AcSMT from meat fortified at 0.5 micrograms/g were 90.1-93.3 and 93.0-94.4%, respectively, with coefficients of variation of 1.9-3.2 and 1.5-2.7%. The limits of detection were 0.02 micrograms/g for each drug. SMT was found in ten samples of imported meat (12.5%) at levels ranging from 0.05 to 1.05 micrograms/g.     

Spectrophotometric determination of boron with an azomethine H derivative

Summary An azomethine H derivative, 1-(2,4-dihydroxybenzylidene-amino)-8-hydroxynaphthalene-3,6-disulphonic acid (azomethine HR) was examined and proposed as a spectrophotometric reagent for boron, as compared with azomethine H. Azomethine HR reacts with boron in aqueous solution (pH 7.5) to form a yellow complex having an absorption maximum at 425 nm. The sensitivity is 3.5-fold greater than with azomethine H when the same reagent concentration is applied. Basic conditions for the determination of boron have been worked out. The method is applicable to sea and hot spring waters. The standard deviation is ±2.1%.

---

Spektralphotometrische Borbestimmung mit einem Azomethin H-Derivat

     

High-performance liquid chromatography of histamine and 1-methylhistamine with on-column fluorescence derivatization.

An on-column fluorometric derivatization method was developed for the determination of histamine and 1-methylhistamine (HMs) by high-performance liquid chromatography. The system for the derivatization consisted only of a commercially available single-plunger pump and a reversed-phase C18 column supported on synthetic polymer with a mobile phase of acetonitrile and alkaline borate buffer solution containing o-phthalaldehyde as a derivatization reagent. It required no additional reaction system as for a post-column derivatization method. Injected HMs might be derivatized to a fluorophore on the inlet site of the high-performance liquid chromatographic column, followed by chromatography on the same column. Optimization of the on-column reaction conditions resulted in a simple and sensitive analytical method for the determination of HMs with excellent reproducibility and linearity of 0.05-5 micrograms/ml of both HMs. Application of this method to the determination of HMs in food samples resulted in a limit of quantification of 0.05 mg/100 g and in a greater than 95% overall mean recovery at a fortification of 0.1 mg/g of both HMs. This method was furthermore applicable to the determination of histamine released from rat peritoneal mast cells.     

Synthesis of well‐defined block copolymer composed of flexible amphiphilic poly(ethylene glycol) and hydrophobic liquid crystalline segments by living coordination polymerization of allene derivatives and its application to thin film with perpendicularly oriented cylindrical nanostructure

A block copolymer composed of a flexible polar poly(ethylene glycol) (PEG) and a less polar liquid crystalline poly(allene) segments is prepared by the living coordination polymerization of an allene derivative possessing trans‐azobenzene‐containing mesogenic substituent by the use of a π‐allylnickel macroinitiator bearing PEG segment. The thin film of the block copolymer is prepared by the spin coating of its solution onto mica or silicon wafer which proves to possess perpendicularly oriented nanocylindrical microphase separated structures as supported by the differential calorimetric, polarized optical microscopic, grazing‐incidence small‐angle X‐ray scattering, transmission electron microscope, and atomic force microscope measurements.     

Simple system for evaluating retardation of liquid crystal cells using grating type liquid crystal polarization splitters

We propose a unique optical system for measuring the retardation of birefringent films using a pair of liquid crystal (LC) gratings; that is, the examined birefringent films are inserted between two LC gratings. Because the LC grating functions as a polarization beam splitter for circularly polarized light, the proposed system is optically equivalent to the measurement system using a pair of two circular polarizers. First, the polarization splitting performance of the LC grating is discussed. It is found that a sufficiently high voltage (such that the retardation is less than a half wavelength) has to be applied for the almost pure circularly polarized diffracted light. Next, the measurement of the retardation of a homogeneous LC cell as an examined birefringent film was demonstrated using the proposed method. The proposed method is revealed to have the same measurement performance as that of the conventional method using a pair of linear polarizers and has an advantage that there is no need for the optic axis of the test birefringent specimen to be set at a specific angle.     

Packing manner of graft copolymers with rigid‐rod main chains and amorphous‐crystalline diblock copolymers as side chains

We have investigated the morphology and packing manner of graft copolymers consisting of rigid‐rod‐like poly(γ‐benzyl L ‐glutamate) (PBLG) main chains and grafted diblock copolymers of amorphous poly(propylene glycol) (PPG) and crystalline poly(ethylene glycol) (PEG). The results of differential scanning calorimetry and wide‐angle X‐ray scattering measurements for graft copolymers with higher side‐chain volume fractions suggest that the rodlike main chains and crystallized PEG chains exist in segregated domains. Small‐angle X‐ray scattering profiles for these samples show diffraction intensity maxima accompanied by higher order peaks, the positions of which suggest the formation of an ordered layered structure. From these observations, the graft copolymers are estimated to form repeated layered structure consisting of segregated PBLG, PPG, and PEG layers. A proposed model for molecular packing of the graft copolymers is consistent with the experimental observation that the repeating distance for the layered structure decreases with an increase in the volume fraction of side chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1904–1912, 2002     

Development of upper bound technique for analysis of fracture in metal forming

Summary An attempt is made to modify the plasticity theory for compressible materials and then to derive the upper bound theorem or the second extremum principle which incorporate normal velocity discontinuity; this discontinuity is considered to be a measure of fracture. The theorem is applied to predict the occurrence of fracture, central bursting in extrusion or drawing. The occurrence of fracture appears to depend on the value of the parameters in the theorem; these parameters may be related to ductility or workability of the material in question. The upper bound technique is then applied to multi-stage extrusion of a carbon steel for which the values of the parameters are given with some assumptions. It is thus shown that the stage at which central bursting occurs agrees with experimental results and that it apparently depends on the extrusion condition.

---

Ein obere-schranken-konzept zur bestimmung von bruchvorgängen bei der umformung von metallen

Übersicht Es wird der Versuch unternommen, mit einer modifizierten Plastizitätstheorie für kompressible Werkstoffe den Obere-Schrankensatz bzw. das zweite Extremum-Prinzip herzuleiten, wenn die Normalgeschwindigkeit auf Sprungflächen unstetig ist. Diese Unstetigkeit wird als Indikator von Bruchvorgängen angesehen. Angewandt wird diese Hypothese auf die Vorhersage des Bruchs, d. h. der Materialtrennung im Kern beim Durchdrück- bzw. Durchziehverfahren. Das Auftreten von Brüchen erweist sich als abhängig von den Parametern des Ansatzes. Diese Parameter lassen sich mit der Umformbarkeit des Materials in Zusammenhang bringen. Angewandt wird das Obere-Schranken-Konzept auf das mehrstufige Durchpressen eines Kohlenstoff-Stahls, für den die Parameterwerte mit Hilfe einiger Parameterwerte festgelegt werden. Davon ausgehend wird gezeigt, daß die Preßstufe bei Materialtrennung mit experimentellen Ergebnissen übereinstimmt und offensichtlich von den Durchpreßbedingungen abhängt.

     

UV luminescent organic-capped ZnO quantum dots synthesized by alkoxide hydrolysis with dilute water

A novel synthesis route to organic-capped and colloidal ZnO quantum dots (QDs) has been developed. Specifically, zinc-di-t-butoxide and zinc-di-n-butoxide are hydrolyzed by very dilute water (400-600 mass ppm) in hydrophilic benzylamine and polymerized to ZnO by dehydration and/or a butanol elimination reaction. Growth of the ZnO QDs and exchange of the surface capping ligand from the hydroxyl groups and/or benzylamine to the oleylamine occur by heating the colloidal solution after addition of the oleylamine at 100-180°C. The final ZnO QDs with diameters in the range of 3-7 nm are highly dispersible in various organic solvents. The ZnO QDs exhibit the quantum size effect upon UV emission; it was controlled between 3.39 and 3.54 eV in the present study. The defect-related Vis emission decreased and the UV emission becomes dominant when zinc-di-n-butoxide with a 99.99% zinc purity is used as the starting material. The intensity of the photoluminescence UV emission is 1.5 times higher than that of the Vis emission.     

Cross-sectional observations of the cholesteric texture in a Cano wedge cell

A novel procedure for an observation of a liquid crystal texture is proposed by using a UV curable liquid crystal. Optical observations from a cross-section of the Cano wedge cell are demonstrated and layered structures of cholesteric LC are visualized clearly. The structures near the Grandjean lines are then revealed in detail from images. From the observations, it is confirmed that the texture near the Grandjean line is similar to fingerprint texture