WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

HCN laser scattering on the JIPP T-IIU tokamak

A 4-channel HCN laser scattering system has been developed and applied to the JIPP T-IIU tokamak. Main aim of this system is to study microturbulence excited in the plasma, especially in the high power ICRF heating experiment. The observed density fluctuations are in a frequency range of the electron diamagnetic drift wave and have broad frequency spectra. The main part of the wavenumber is found to satisfy the condition of . In the heating experiments, deterioration of the energy confinement time is observed, and the density fluctuation level increases with the increase of the heating power.     

Synthesis, structure, and physical properties of 1,11-o-benzeno[2]orthocyclo[2](1,2)tropyliophane

The title compound (2) has been synthesized, the structure and the physical properties of which are investigated by X-ray, spectroscopic analyses, and MO calculations. There exists charge transfer (CT) interaction between the tropylium ion and the facing phenyl ring. From the pK_R⁺ value of 2, it can be clear that the cation 2 is stabilized by the CT interaction. In spite of the presence of bond weakening σ-π orbital mixing, the cation 2 withstands retro[4+4]type bond cleavage, which is quite interesting when compared to a facile cleavage for the congener with anthracene photodimer type structure.     

Electronic relaxation of molecular exciplexes in the vapor phase

Interaction of electronically excited TCNB (tetracyanobenzone) and ground-state MB (methylated benzenes) leads to the formation of fluorescent exciplexes in the vapor phase. Studies of exciplex fluorescence as a function of excess vibrational energy in TCNB and of temperature and pressure of added buffer gas, lead to the conclusion that the low-frequency inter-molecular vibrations play a very important role in the radiationless deactivation of exciplexes. The results also indicate that collisional relaxation of low-frequency intermolecular vibrations proceeds much more rapidly than that of high-frequency intramolecular vibrations.     

An unusual twist conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol

The ring conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol was in a twist form both in solid state and in solution. This is the first observation of a stable twist conformer induced by the introduction of bulky silyl protecting groups.     

Melting behavior of highly stretched isotactic polypropylene film

Isotactic polypropylene film was stretched in poly(ethylene glycol) at 140°C and its melting behavior was investigated by using a differential scanning calorimeter (DSC-1B). The shape of the melting curve depends largely on the stretching ratio, v. A sample stretched to moderate extension (1 < v < 3.5–4) has only a single melting peak (163°C) in the thermogram. When the sample is stretched beyond v = 3.5–4, the thermogram becomes more and more complex with increase of v, and some peaks appear when stretched to 10 < v < 13. The lowest peak which is considered to be the melting peak of the intermolecular crystals produced by the unfolding of chain molecules in the lamellae develops gradually with increase of v. In the thermogram for v = 18 the lowest temperature peak is most pronounced, in contrast to the highest temperature peak which decreases markedly in intensity. The phenomenon shows that large amounts of lamellar crystals are converted to intermolecular crystals in this region. On further stretching (v > 20) a very sharp high temperature peak appears, whose half-width is about 1°C. Qualitatively similar results were obtained for the samples stretched in poly(ethylene glycol) at 150°C and in air at 140 and 150°C.     

Studies on the biaxial stretching of polypropylene film. III. Electron microscopic observation of the one-step biaxial stretching of isotactic polypropylene spherulites

Polypropylene films of various isotacticities and crystallinities were stretched biaxially in one step in air at 140–152°C or polyaxially in poly(ethylene glycol) at 130–160°C, and the morphological changes were studied by electron microscopy (replica). In the initial stage of stretching, with v_A = 1.4, the spherulites of one of the films used for the experiment were broken both from the centers and boundaries, and those of another film were broken mainly from the center. This difference in the deformation behavior seems to be characteristic of the film properties and independent of the method of stretching, although the factors involved are still unknown. On further stretching (v_A = 22), well annealed spherulites were broken into many small blocklike fragments with unfolded fibrils running among them, particularly at the low stretching temperature (140°C), and fibrillation proceeded at the expense of the residual fragments. In the case of quenched or slightly crystallized material, the fragments were dendritic and divided into finer and finer fibrils on stretching. At elevated temperature, however, even for well annealed spherulites, the deformation behavior resembles that of the quenched material, and at a high degree of stretching the spherulites take on the fibrillar net structure in every case. In films containing a high amount of atactic fraction, radial, tangential, and boundary cracking occurred more easily, and broad fibrils were observed across the cracks.     

New optically active organoantimony (BINASb) and bismuth (BINABi) compounds comprising a 1,1′-binaphthyl core: synthesis and their use in transition metal-catalyzed asymmetric hydrosilylation of ketones

Racemic 2,2′-bis[diarylstibano]-1,1′-binaphthyls [(±)-BINASbs] and 2,2′-bis[di(p-tolyl)bismuthano]-1,1′-binaphthyl [(±)-BINABi], which are the antimony and bismuth congeners of BINAP, have been prepared from 2,2′-dibromo-1,1′-binaphthyl (DBBN) via 2,2′-dilithio-1,1′-binaphthyl intermediate by treatment with the appropriate metal halides [(p-Tol)₂SbBr, Ph₂SbBr and (p-Tol)₂BiCl]. The optical resolution of the (±)-BINASbs could be achieved via the separation of a mixture of the diastereomeric Pd-complexes derived from the reaction of (±)-BINASbs with di-μ-chlorobis{(S)-2-[1-(dimethylamino)-ethyl]phenyl-C¹,N}dipalladium(II). Optically active (R)-BINASb and (R)-BINABi could be also obtained from optically active (R)-DBBN by the same procedure. The enantiopure BINASbs have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.     

A superoxide dismutase-modified electrode that detects superoxide ion

A superoxide dismutase (SOD)-modified electrode, in which SOD is oriented on the gold electrode via a self-assembled monolayer of cysteine so as to allow its direct electrode reaction, possesses a bi-directional electrocatalysis for both the oxidation of superoxide ion (O2-) to O2 and the reduction of O2- to H2O2 and functions as a third generation O2- biosensor.