WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

Self-organization of a sulfonamido-porphyrin in Langmuir monolayers and Langmuir-Blodgett films

Langmuir monolayers (LM) and Langmuir-Blodgett (LB) films of pure lipophilic meso-tetra(4-dodecylaminosulfophenyl)porphyrin (PC12) and mixed with the anionic surfactant sodium hexadecylsulfate (SHS) were studied. The molecular packing and structure of PC12 and PC12-4SHS with variable surface pressure were investigated by surface pressure-area measurements, steady-state absorption, fluorescence emission and anisotropy, as well as by fluorescence lifetime imaging microscopy (FLIM). At low surface pressure, the porphyrin molecules are organized with the rings tilted on the water surface whereas at high surface pressure the porphyrin rings achieve a more perpendicular arrangement. Using the FLIM images a gradual change of aggregates into large "islands" is observed. Different patterns are observed in the pure PC12 multilayer films (n = 3 and 5) with ordered patches superimposed which are not observed in the PC12-4SHS multilayer LB films.     

Cubic phases of 4′-n-alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC-n)

The structure of the thermotropic cubic phases of 4′- ⁿ -alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC- ⁿ , where ⁿ indicates the number of carbon atoms in the alkoxy group) was studied by X-ray diffraction. For the homologues with ⁿ = 15, 16, 17, and 18, the cubic phase was of an ^Ia 3 ^d type, whereas the homologues with ⁿ = 19, 20, and 21 exhibited an ^Im 3 ^m cubic structure; for these seven homologues the same type of cubic structure was observed both on heating and cooling. Further lengthening of the alkoxy chain to ⁿ = 22 and 26, however, gave two types of cubic structure in the cubic phase region on heating, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d symmetry in the high temperature region. On cooling, the two homologues exhibited the ^Ia 3 ^d cubic structure only. This is the first example in the cubic phase region of a series of homologues containing two types of structure, dependent on temperature and ⁿ . Such a complicated phase diagram in the cubic region is clearly understood qualitatively in terms of Gibbs free energy-temperature diagrams. The dependence of structural parameters such as the cubic lattice constant on the alkoxy chain length ⁿ are also presented and discussed.     

Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

Simultaneous Determination of Pyridine-Triphenylborane Anti-Fouling Agent and Its Degradation Products in Artificial Seawater by CZE

We developed a CZE method for simultaneous determination of pyridine-triphenylborane (PTPB) anti-fouling agent and its degradation products such as diphenylborinic acid (DPB), phenylboronic acid (MPB), and phenol in artificial seawater (ASW) with no extraction procedure. The ASW samples, in which 20 % (v/v) acetonitrile was added, were injected directly into the capillary using vacuum injection. As the background electrolyte, 60 mM sodium tetraborate adjusted to pH 9.8 was used. The LODs (S/N = 3) for PTPB, DPB, MPB, and phenol were, respectively, 55, 78, 126, and 30 μg L^?1. The RSDs (n = 4) for analytes listed above were in the respective ranges of 2.7–5.7, 0.68–6.1, and 0.69–1.1 % for the peak area, peak height, and migration time. Simple degradation experiments were conducted to verify the usefulness of the proposed method. The PTPB samples dissolved in ASW were put in the open air, and rooms with and without light. The sample solutions were analyzed over time. We inferred that PTPB in ASW was more degraded by photolysis than by hydrolysis. The proposed CZE method has been demonstrated as a useful tool to elucidate the PTPB degradation process and its degradation products in ASW.     

High-Field and Multifrequency ESR Studies at KYOKUGEN in Osaka University

We have developed high-field and multifrequency (HFMF) electron spin resonance (ESR) apparatus for the magnetic fields up to 65 T at frequencies up to about 6 THz. In addition to this pulsed field ESR apparatus, we are making a multifrequency ESR apparatus with very high sensitivity in a static field. We report the results of ESR studies on BaCoV₂O₈ and NiGa₂S₄, followed by recent developments and future plans of our HFMF ESR apparatus.     

Molecular synchronization waves in arrays of allosterically regulated enzymes

Spatiotemporal pattern formation in a product-activated enzymic reaction at high enzyme concentrations is investigated. Stochastic simulations show that catalytic turnover cycles of individual enzymes can become coherent and that complex wave patterns of molecular synchronization can develop. The analysis based on the mean-field approximation indicates that the observed patterns result from the presence of Hopf and wave bifurcations in the considered system.     

One-pot hydrothermal synthesis of an assembly of magnetite nanoneedles on a scaffold of cyclic-diphenylalanine nanorods

The assembly of metal oxide nanoparticles (NPs) on a biomolecular template by a one-pot hydrothermal synthesis method is achieved for the first time. Magnetite (Fe₃O₄) nanoneedles (length: ~100 nm; width: ~10 nm) were assembled on cyclic-diphenylalanine (cFF) nanorods (length: 2–10 μm; width: 200 nm). The Fe₃O₄ nanoneedles and cFF nanorods were simultaneously synthesized from FeSO₄ and l-phenylalanine by hydrothermal synthesis (220 °C and 22 MPa), respectively. The samples were analyzed by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (IR), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. Experimental results indicate that Fe₃O₄ nanoneedles were assembled on cFF nanorods during the hydrothermal reaction. The composite contained 3.3 wt% Fe₃O₄ nanoneedles without any loss of the original magnetic properties of Fe₃O₄.     

Curdlan as a Polymeric Starting Material to Access C6-Modified Glucose Derivatives

We evaluated the potential of a linear β-1,3-glucan (curdlan) as a starting material to access C6-modified glucose derivatives and found that 6-bromo-6-deoxyglucose, 6-azide-6-deoxyglucose, and 6-acetamido-6-deoxyglucose could be readily prepared from curdlan through its C6-selective and quantitative modifications and subsequent acid-catalyzed hydrolysis.