Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.     

Determination of line tension for systems near wetting

Contact angle measurements for three n-alkanes, heptane, octane, and nonane, on two different self-assembled surfaces (SAM) are reported as a function of drop size. These liquids all formed low contact angles (below 20 degrees ); the measurements were performed using an accurate method for systems with low contact angle, ADSA-D. The observed drop size dependence of the contact angles was interpreted using the modified Young equation. It was concluded that the observed drop size dependence of contact angles was due to line tension. The choice of systems also provided the opportunity to examine the behavior of the line tension for systems near wetting (i.e., low contact angles). It was determined that the line tension is positive and ranges from below 10(-7) to just below 10(-6) J/m for the systems studied; the observations suggested that the line tension decreases as the contact angle decreases and likely vanishes at complete wetting.     

A simple accurate model for prediction of deflagration temperature of energetic compounds

A novel general method is introduced to predict deflagration temperature of organic energetic compounds containing at least –NNO₂, –ONO₂, or –CNO₂ groups. Deflagration temperature is an important safety parameter in working with dangerous energetic compounds and their environmental problems. It is shown that the contribution of some molecular structure parameters can be used to interpret thermal decomposition of an energetic compound. For 86 energetic materials (corresponding to 102 measured values) with different molecular structures, the new correlation has the root mean square (rms) and the average deviations of 23.8 and 19.0 K, respectively. The new method is also tested for some energetic compounds with complex molecular structures, e.g., two new organic energetic molecules N,N′-bis(1,2,4-triazol-3yl)-4,4′-diamino-2,2′,3,3′,5,5′,6,6′-octanitroazobenzene (BTDAONAB) and 2,4,6-trinitrophloroglucinol.     

A novel method for risk assessment of electrostatic sensitivity of nitroaromatics through their activation energies of thermal decomposition

This study presents a novel relationship between electric spark sensitivity of nitroaromatic energetic compounds and their activation energies of thermal decomposition. The new correlation can help to elucidate the mechanism of initiation of energetic materials by electric spark. It can be used to predict the magnitude of electric spark sensitivity of new nitroaromatics, which is difficult to measure. The methodology assumes that electric spark sensitivity of a nitroaromatic energetic compound with general formula C_aH_bN_cO_d can be expressed as a function of its activation energy of thermal decomposition as well as optimized elemental composition and the contribution of specific molecular structural parameters. The new correlation has the root mean square and the average deviations of 1.43 and 1.17 J, respectively, for 22 nitroaromatic energetic compounds with different molecular structures. The proposed new method is also tested for eight nitroaromatic energetic compounds, which have complex molecular structures, e.g., 1,3,7,9-tetranitrophenoxazine, 2,4,6-tris(2,4,6-trinitrophenyl)-1,3,5-triazine, and 1-(2,4,6-trinitrophenyl)-5,7-dinitrobenzotriazole.     

A preliminary study on the development and characterisation of enzymatically grafted P(3HB)-ethyl cellulose based novel composites

In the present study, a novel enzyme-based grafting of poly(3-hydroxybutyrate) [P(3HB)] onto the ethyl cellulose (EC) as a backbone polymer was developed under a mild and ecofriendly environment and laccase was used as a grafting tool. The resulting composites were characterised using various instrumental and imaging techniques. The high intensity of the 3,358 cm^?1 band in the FTIR spectra showed an increase of hydrogen–bonding interactions between P(3HB) and EC at that distinct wavelength region. The morphology was examined by scanning electron microscopy, which showed the well dispersed P(3HB) in the backbone polymer of EC. X-ray diffraction pattern for P(3HB) showed distinct peaks at 2-theta values of 28°, 32°, 34°, 39°, 46°, 57°, 64°, 78° and 84°. In comparison with those of neat P(3HB), the degree of crystallinity for P(3HB)-g-EC decreased. The tensile strength, elongations at break and Young’s modulus of P(3HB)-g-EC reached the highest levels in comparison to the film prepared with pure P(3HB) only, which was too brittle to measure any of the above said characteristics. Results obtained in the present study suggest P(3HB)-g-EC as a potential candidate for various biotechnological applications, such as tissue engineering and packaging.     

Assessment of Thermal Stability and Detonation Performance of 4-Amino-1,2,4-triazolium Nitrate as compared to 2,4,6-Trinitrotoluene for Melt-cast Explosives

4-Amino-1,2,4-triazolium nitrate (4-ATN) is an energetic and non-sensitive ionic liquid, which was introduced as a good candidate in previous works for the replacement of 2,4,6-trinitrotoluene (TNT) in melt-cast explosives. Since previous studies used pure nitric acid for nitration of 4-ATN, the effect of the use of low price industrial nitric acids (50 %, 70 % and 98 %) is investigated on the percent yields of 4-ATN. The thermogravimetric and differential scanning calorimetry (TGA/DSC) are done on the synthesized 4-ATN with impure nitric acid at a heating rate of 10 K · min^–1 by the vacuum system. The obtained TGA/DSC curves confirm decomposition of 4-ATN involving melting and dissociation. Derivative thermogravimetric (DTG) curves of 4-ATN at various heating rates are applied to obtain activation energy of thermolysis by several model-free techniques. The calculated activation energies are in the range 78.7–87.7 kJ · mol^–1, which are about 10 kJ · mol^–1 more than the reported activation energy of industrial TNT (purity 98.2 %), i.e. 66–70 kJ · mol^–1. Assessments of detonation performance of 4-ATN are also compared with TNT, which show higher detonation performance of 4-ATN. Thus, 4-ATN can be used with nitramine compounds as melt-cast explosives with higher thermal stability and detonation performance than corresponding nitramine compound/TNT explosives.     

All optical switching in semiconductor microresonators based on pattern selection

We present here a method for selecting optical patterns in a passive semiconductor microresonator, by using a spatial perturbation. A pattern is spontaneously generated in the system, and a switching beam causes this pattern to rotate even if the power in the switching beam is much lower than the power in the pattern. Thus, an all optical switch is realized, that operates at low light levels.