Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.     

Crystal Structure of a New Ammonium Potassium Selenomolybdate Compound K3.31(NH4)0.69[Se2Mo5O21]·2H2O

An inorganic compound formulated as K_3.31(NH₄)_0.69[Se₂Mo₅O₂₁]·2H₂O has been synthesized by conventional solution method and characterized by scanning electron microscopy, IR, UV-Vis spectroscopies behaviors. The structure of the title compound has been determined from a single-crystal X-ray diffraction. It crystallizes in the monoclinic space group P2₁/n, with a?=?9.9371(2) ?, b?=?23.3545(2) ?, c?=?10.5179(2) ?, β?=?114.12(3)°, V?=?2227.7(5) ?³ and Z?=?4. It was revealed that the Strandberg-type polyoxoselenomolybdate cluster can be considered as a ring formed by five distorted edge- and corner-sharing MoO₆ octahedra, capped on both poles by a selenate pyramids sharing three vertices with the ring molybdenum centers. The Strandberg clusters are connected with ammonium ions and water molecules through hydrogen-bonding interactions which ensure the cohesion of the structure into a three-dimensional network.     

Existence of conformal metrics with prescribed scalar curvature on the four dimensional half sphere

In this paper, we consider the problem of prescribing the scalar curvature under minimal boundary conditions on the four dimensional half sphere. Using dynamical and topological methods involving the study of the critical points at infinity of the associated variational structure, we prove some existence results like Bahri-Coron theorem. Furthermore, we consider the approximate subcritical problem and we construct some solutions which blow up at two different points, one of them lay on the boundary and the other one is an interior point.     

Stereoselective Synthesis of Some Dialkyl (E)-2-Bromomethylene Glutarates

Reaction of 2-bromo-2-bromomethyl glutaric acid esters with tetraalkylammonium fluoride in HMPA, conveniently provides the corresponding dialkyl (E)-2-bromomethylene derivatives in good yields.     

An Enhanced Process for the Production of a Highly Purified Extracellular Lipase in the Non-conventional Yeast <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

Yarrowia lipolytica LgX64.81 is a non-genetically modified mutant that was previously identified as a promising microorganism for extracellular lipase production. In this work, the development of a fed-batch process for the production of this enzyme in this strain was described. A lipolytic activity of 2,145 U/mL was obtained after 32 h of batch culture in a defined medium supplemented with 10 g/L of tryptone, an enhancer of lipase expression. To maximize the volumetric productivity, two different fed-batch strategies had been investigated. In comparison to batch process, the intermittent fed-batch strategy had not improved the volumetric lipase productivity. In contrast, the stepwise feeding strategy combined with uncoupled cell growth and lipase production phases resulted in a 2-fold increase in the volumetric lipase productivity, namely, the lipase activity reached 10,000 U/mL after 80 h of culture. Furthermore, this lipase was purified to homogeneity by anion exchange chromatography on MonoQ resin followed by gel filtration on Sephacryl S-100. This process resulted in an overall yield of 72% and a 3.5-fold increase of the specific lipase activity. The developed process offers a great potential for an economic production of Lip2 at large scale in Y. lipolytica LgX64.81.     

Empirical analysis of self-adaptive differential evolution

Differential evolution (DE) is generally considered as a reliable, accurate, robust and fast optimization technique. DE has been successfully applied to solve a wide range of numerical optimization problems. However, the user is required to set the values of the control parameters of DE for each problem. Such parameter tuning is a time consuming task. In this paper, a self-adaptive DE (SDE) algorithm which eliminates the need for manual tuning of control parameters is empirically analyzed. The performance of SDE is investigated and compared with other well-known approaches. The experiments conducted show that SDE generally outperform other DE algorithms in all the benchmark functions. Moreover, the performance of SDE using the ring neighborhood topology is investigated.     

Use of quasi-isoelectric buffers to limit protein adsorption in capillary zone electrophoresis

The use of quasi-isoelectric buffers consisting of narrow pH cuts of carrier ampholytes (NC) has been investigated to limit protein adsorption on capillary walls during capillary zone electrophoresis experiments. To quantify protein adsorption on the silica surface, a method derived from that of Towns and Regnier has been developed. alpha-Lactalbumin (14 kDa, pI 4.8) and alpha-chymotrypsinogen A (25 kDa, pI 9.2) have been used as model proteins. Acidic narrow pH cuts of carrier ampholytes (NC, pH 3.0) obtained from fractionation of Serva 4-9 carrier ampholytes were used as BGE in bare-silica capillaries, and allowed to decrease significantly protein adsorption, as compared to experiments performed with classical formate buffer. The use of NC as BGE appeared to be as efficient as the use of polydimethylacrylamide coating to prevent protein adsorption. This increase of protein recovery when using NC was attributed to the interaction of carrier ampholytes with the silica surface, leading to a shielding of the capillary wall.     

Triplet energy transfers in electrostatic host-guest assemblies of unsaturated organometallic cluster cations and carboxylate-containing porphyrin pigments

The unsaturated cyclic [M3(dppm)3(CO)](2+) clusters (M = Pt, Pd; dppm = Ph2PCH2PPh2; such as PF6(-) salt) exhibit a cavity formed by the six dppm-phenyl groups placed like a picket fence above the unsaturated triangular M3 dicationic center. Electrostatic interactions of the M(3+) units inside this cavity with the carboxylate anion RCO2(-) [R = tetraphenylporphyrinatozinc(II), ZnTPP; p-phenyltritolylporphyrinatozinc(II), ZnTTPP; p-phenyltritolylporphyrinatopalladium(II), PdTTPP] form dyads for through-space triplet energy transfers. The binding constants are on the order of 20,000 M(-1) in all six cases (298 K). The energy diagram built upon absorption and emission spectra at 298 and 77 K places the [Pt3(dppm)3(CO)](2+) and [Pd3(dppm)3(CO)](2+) as triplet energy donors, respectively, with respect to the ZnTPPCO2(-), ZnTTPPCO2(-), and PdTTPPCO2(-) pigments, which act as acceptors. Evidence for energy transfer is provided by the transient absorption spectra at 298 K, where triplet-triplet absorption bands of the metalloporphyrin chromophores are depicted at all time (at 298 K) with total absence of the charge-separated state in the nanosecond to microsecond time scale. Rates for energy transfer (ranging in the 10(4) s(-1) time scale) are extracted from the emission lifetimes of the [Pt3(dppm)3(CO)](2+) donor in the free chromophore and the host-guest assemblies. The emission intensity of [Pd3(dppm)3(CO)](2+) is too weak to measure its spectrum and emission lifetime in the presence of the strongly luminescent metalloporphyrin-containing materials. For the [Pd3(dppm)3(CO)](2+)...metalloporphyrin dyads, evidence for fluorescence and phosphorescence lifetime quenching of the porphyrin chromophore at 298 K is provided. These quenchings, exhibiting rates of 10(4) (triplet) and 10(8) s(-1) (singlet), are attributed to a photoinduced electron transfer from the metalloporphyrin to the cluster due to the low reduction potential.     

A New Generator of Probability Models: The Exponentiated Sine-G Family for Lifetime Studies

In this article, we propose the exponentiated sine-generated family of distributions. Some important properties are demonstrated, such as the series representation of the probability density function, quantile function, moments, stress-strength reliability, and Rényi entropy. A particular member, called the exponentiated sine Weibull distribution, is highlighted; we analyze its skewness and kurtosis, moments, quantile function, residual mean and reversed mean residual life functions, order statistics, and extreme value distributions. Maximum likelihood estimation and Bayes estimation under the square error loss function are considered. Simulation studies are used to assess the techniques, and their performance gives satisfactory results as discussed by the mean square error, confidence intervals, and coverage probabilities of the estimates. The stress-strength reliability parameter of the exponentiated sine Weibull model is derived and estimated by the maximum likelihood estimation method. Also, nonparametric bootstrap techniques are used to approximate the confidence interval of the reliability parameter. A simulation is conducted to examine the mean square error, standard deviations, confidence intervals, and coverage probabilities of the reliability parameter. Finally, three real applications of the exponentiated sine Weibull model are provided. One of them considers stress-strength data.