Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

Potential Mechanisms of Photodynamic Inactivation of Virus by Methylene BlueI. RNA–Protein Crosslinks and Other Oxidative Lesions in Qβ Bacteriophage

A spectrum of oxidative lesions was observed in a bacteriophage-based model system that is very sensitive to the photodynamic activity of selected dyes. When suspensions of the intact bacteriophage Qβ were exposed to methylene blue plus light (MB+L), inactivating events, or "hits" occurred that were oxygen-dependent and that were associated with the formation of several specific lesions: (1) carbonyl moieties on proteins, (2) 8-oxo-7,8-dihydroguanine (8-oxoGua), and (3) single-strand breaks (ssb) in the RNA genome and (4) RNA-protein crosslinks. Formation of carbonyl groups associated with protein in the Qβ phage preparation correlated positively with photoinactivation of the phage with increasing doses of either of the sensitizers MB or rose bengal. Strand breaks in the Qβ genomic RNA were observable at high MB concentrations but appeared not to be significant at the lower concentrations of MB, as full-length Qβ RNA was observable well beyond the 99% inactivation point in MB dosage. It was shown that the number of 8-oxoGua lesions were unlikely to be sufficient to account for the number of lethal events. Following exposure to MB+L, crosslink formation between Qβ RNA and protein was observed by virtue of the location of RNA at the interface of phenol-aqueous extractions of phage suspensions. A significant increase over background of RNA-protein complexes (including full-length Qβ RNA) was observed at the lowest concentration of MB tested (0.5 μ M ), which corresponded roughly to an average of 2 lethal hits per phage or approximately 13% survival compared to the zero MB control (100% survival). Due to its close correlation with Qβ inactivation and its expected lethality, RNA-protein crosslink formation may be important as an inactivating lesion in bacteriophage Qβ following MB+L exposure.     

Preparation of bismuth sulfide nanoparticles as targeted biocompatible nano-radiosensitizer and carrier of methotrexate

In this study, Bi₂S₃@BSA–Bio–MTX nanoparticles (NPs) were synthesized for the first time by bovine serum albumin (BSA)-mediated biomineralization (Bi₂S₃@BSA NPs) followed by covalent bonding of biotin (Bio) and methotrexate (MTX) on the surface of the Bi₂S₃@BSA NPs via carbodiimide chemistry. The synthesized NPs were globular and exhibited uniform morphology with a hydrodynamic diameter of 107.6 ± 6.81 nm (mean ± standard deviation) and zeta potential of −20.9 ± 2.18 mV. Drug release from Bi₂S₃@BSA–Bio–MTX NPs indicated an enzyme-dependent release pattern. The in vitro biocompatibility of NPs was confirmed by investigating their cytotoxicity against the HEK-293 cell line and hemolysis assay test, whereas the in vivo biocompatibility of the NPs was evaluated and confirmed by the lethal dose 50 (LD₅₀) test. To evaluate the in vitro anticancer activity of the functionalized NPs and MTX, their cytotoxic effects was assessed against 4T1 cancer cells by 5-dimethylthiazol-z-yl)-2,5-diphenyltetrazolium bromide (MTT) assay with and without X-ray radiation. Results showed that Bi₂S₃@BSA–Bio–MTX NPs have excellent anticancer activity, especially following X-ray radiation.     

A Facile Room Temperature Synthesis of Zinc Oxide Nanostructure and Its Influence on the Flame Retardancy of Poly Vinyl Alcohol

In this work, poly vinyl alcohol–ZnO nanocomposites were synthesized via two different in situ and ex-situ methods. In ex-situ, at first zinc oxide nanostructures were synthesized by one-step precipitation reaction between zinc acetate and sodium hydroxide. The effect of different surfactants such as poly vinyl pyrrolidone, poly vinyl alcohol and poly ethylene glycol on the morphology of ZnO nanostructures was investigated. Nanostructures were characterized by X-ray diffraction, scanning electron microscopy. The influence of ZnO nanostructures on the flame retardancy of the poly vinyl alcohol matrix was studied using underwriter laboratories UL-94 analysis.     

Novel Schiff base’s complex as a green catalyst for the synthesis of diindolylmethanes under ultrasonics irradiation

A facile and convenient protocol was developed for the synthesis of diindolylmethanes in short reaction time and high yields using newly synthesized complex as an efficient recyclable heterogeneous catalyst. All synthesized compounds were characterized by IR, NMR spectra and elemental analysis.     

Analysis of tamoxifen and its main metabolites in plasma samples of breast cancer survivor female athletes: Multivariate and chemometric optimization

A sensitive method based on liquid chromatography combined with a diode array detector was developed and validated to simultaneously determine tamoxifen, and its active metabolites N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen in human plasma samples. The green and sustainable vortex-assisted dispersive liquid-phase microextraction technique based on the natural hydrophobic deep eutectic solvent was used for the extraction and preconcentration of the analytes. Chemometrics and multivariate analysis were used to optimize the independent variables including the type and volume of deep eutectic solvent, extraction time, and ionic strength. Under optimal conditions, calibration curves were linear in a suitable range with the lower limits of quantification (0.8–10.0 μg/L), which covered the relevant concentrations of the analytes in plasma samples for a clinical study. Intra- and interday precision evaluated at three concentrations for the analytes were lower than 8.2 and 12.1%, respectively. Accuracy was in the range of 94.9–104.7%. The applicability of the developed method on human plasma samples illustrated the range 45.1–72.8, 98.4–128.3, 0.9–1.2, and 2.7–6.1 μg/L for tamoxifen, N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen, respectively. The validated method can be effective for the pharmacokinetics, pharmacodynamics, and therapeutic drug monitoring studies of tamoxifen and its main metabolites in biological fluids.     

Highly functionalized pyrazolines from symmetric and asymmetric 1,2-disulfonylhydrazines: a combination of experimental and DFT perspectives

Chemistry of Heterocyclic Compounds - In this work, new pyrazole derivatives were prepared by one-pot three-component reaction emloying symmetric and asymmetric 1,2-disulfonyl-hydrazines,...     

Selective Monofunctionalization Enabled by Reaction‐History‐Dependent Communication in Catalytic Rotaxanes

Selective monofunctionalization of substrates with distant, yet equally reactive functional groups is difficult to achieve, as it requires the second functional group to selectively modulate its reactivity once the first functional group has reacted. We now show that mechanically interlocked catalytic rings can effectively regulate the reactivity of stoppering groups in rotaxanes over a distance of about 2 nm. Our mechanism of communication is enabled by a unique interlocked design, which effectively removes the catalytic rings from the substrates by fast dethreading as soon as the first reaction has taken place. Our method not only led to a rare example of selective monofunctionalization, but also to a “molecular if function”. Overall, the study presents a way to get distant functional groups to communicate with each other in a reaction‐history‐dependent manner by creating linkers that can ultimately perform logical operations at the molecular level.     

A comparison on efficiency of virgin and sulfurized agro-based adsorbents for mercury removal from aqueous systems

Mercury adsorption by sulfur impregnated adsorbents seems to be one of the most efficient ways for removal of this toxic metal ion from wastewater and atmosphere. The aim of this work was to develop a method for preparation of low-cost sulfurized adsorbent from agricultural wastes; this approach combines two stages of (i) chemical activation with phosphoric acid and (ii) impregnation with powdered sulfur, in one step only. The physico-chemical properties of sulfurized adsorbent (AC-S) were determined with BET, FT-IR, Eschka method and pH_PZC measurements, and compared with those of the virgin sample (AC). It was found that sulfurization according to this method can introduce about 8 wt.% sulfur into the structure of adsorbent, in the forms of C–S, S–H, S–S and S=O functional groups. Although during the sulfur introduction processes, a decrease in surface area and micropore volume of the sulfurized adsorbent is to be expected, not only such decrease did not occur in this work, but a large increase in microporosity was seen. Thereupon, both the sulfur functionalities and extended microporosity of AC-S lead to higher capability of this sample for mercury adsorption rather than AC. Finally, the kinetics and equilibrium of mercury adsorption from aqueous solutions were studied for AC and AC-S.     

Synthesis of dialkyl 5-(aryl)-1-phenyl-1H-prazole-3,4-dicarboxylates via a one-pot and four-component reaction

A number of new dialkyl 5-(aryl)-1-phenyl-1H-prazole-3,4-dicarboxylate derivatives have been prepared regiospecifically in moderate to good yield from the cyclocondensation reaction of dialkyl (E)-2-(dialkoxyphosphoryl)-3-(aroyl)-2-butenedioate, derived from the reaction between trimethyl phosphite, an acetylenic ester, and an aroyl chloride, with phenylhydrazine. The reaction is four-component and is carried out under reflux conditions in dry toluene.